• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.9
• /
• pp.2257-2264
• /
• 1994

A method to evaluate the position performance for a stochastically defined planar robot manipulator is presented. Performance is defined as the operational reliability based upon the positional errors of the manipulator tip. An analytical method is developed and applied to a two-link robot manipulator through forward kinematics. This study includes uncertainties in the link length, pin center location and radial clearance. By virtue of the effective link length model, only the nominal manipulator model and statistical information on the uncertainties are required. The results from the analytical method is compared to those from the Monte Carlo simulation.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.250-254
• /
• 2008

Robot actuators are significantly important with respect to whole control system performance. This paper presents an adaptive control approach for flexible robot actuators with time-varying spring and damping nature. We first represent a perturbed system model with assumption that its information are partially known. Nominal model reference control method is employed for deriving our adaptive control law. We carry out numerical simulation to evaluate the proposed control system and compare simulation results to a well-known control method for demonstrating its effectiveness.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.4 no.2
• /
• pp.162-170
• /
• 2012

It is very important for the robot to recognize its position to accomplish numerous tasks and to go to the goal. In this paper, we suggest Location Recognition System to distinguish robot's locations using land-mark and the odometer in the environment of sensor network. All in all, we created a basic intelligent robot, Location Recognition System, and Environment Sensor Modules; we verified the proposed algorithm through computer simulation.

• Proceedings of the KIEE Conference
• /
• 1998.11b
• /
• pp.530-532
• /
• 1998

In this paper, We Designed the torque compensatory controller for robot manipulator using modified chaotic neural networks with self feedback loop. The proposed torque compensatory controller compensate torque of the PD controller. In order to estimate the proposed controller, we implemented to the Cartesian space control of three-axis PUMA robot and compared the simulation results with recurrent neural networks(RNNs) controller. Simulation results show that the learning error drastically decrease at on-line learning. The proposed CNNs controller shows much better control performance and shorter processing time compared to the recurrent neural network controller in the robot trajectory control.

• Journal of the Korea Society for Simulation
• /
• v.12 no.1
• /
• pp.11-19
• /
• 2003

Dubins showed that any shortest path of a car-like robot consists of exactly three path segment which are either arcs of circles of radius r(denoted C), or straight line segments(denoted S). Possible six types classified into two families, i.e. CSC and CCC. CSC includes 2 types(LRL and RLR) and CSC includes 4 types(LSL, RSR, LSR, RSL). This paper proposes new formulae for CSC family to find the shortest smooth path between the initial and final configurations of a car-like robot. The formulae is used for finding connection points explicitly between C\longrightarrowS and S\longrightarrowC which are necessary for real applications. The formulae have simple forms mainly because they are transformed into origin of their original coordinates of initial and target configuration, and derived from a standard forms which are a representative configuration of LSL and LSR type respectively. The proposed formulae, which are derived from the standard forms, are simple and new method.

• Proceedings of the KIEE Conference
• /
• 1987.07a
• /
• pp.252-255
• /
• 1987

High performance requirements such as high speed operation. accuracy and versatility have led to the consideration of structural flexibility in robot arms. The purpose of this study is to investigate the interrelationships between the robot structural flexibility and a linear controller for the rigid body motion. This paper employs an assumed modes method to model both the rigid and flexible motion of the robot arm. The simulation results illustrate the differences between leadscrew driven and unconstrainted axes of the robot.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.42 no.5
• /
• pp.31-40
• /
• 2005

In this study, we study measurement of wafer processing throughput and sequence simulation of single wafer type for wafer cleaning equipments that were used for etching, cleaning and polishing of wafer. Based on finite state machine, simulation model was built with identification of robot's status according to scheduling algorithm. Moreover, through performance of simulation as above, throughput per hour of cleaning equipment was measured. By the simulation method that are proposed in this paper, we could measure the wafer throughput per hour according to recipe and robot motion speed, and find optimal recipe and moving sequence of robot that maximize the throughput.

• The Journal of the Korea Contents Association
• /
• v.19 no.2
• /
• pp.469-476
• /
• 2019

Robotic motion is designed by the rotation and the translation of multiple joint coordinates in a three-dimensional space. Joint coordinates are generally modeled by homogeneous transform matrix. However, the complexity of three dimensional motions prefers the visualization methods based on simulation environments in which models and generated motions work properly. Many simulation environments have the limitations of usability and functional extension from platform dependency and interpretation of predefined commands. This paper proposes the web-based three dimensional simulation environment toward high user accessibility. Also, it covers the small size web server that is linked with Python script. The non linearities of robot control apply to verify the computing efficiency, the process management, and the extendability of user scripts.

• Journal of Drive and Control
• /
• v.19 no.2
• /
• pp.1-10
• /
• 2022

Field robots operate in various areas, including construction, agriculture, forestry and manufacturing. Typical tasks of field robots used in various areas include excavation, flattening, and demolition. Such tasks are often accomplished in narrow alleys or indoors. In the case of field robots, there is a limit to working in a small space. Thus, to compensate for these shortcomings, many field robots equipped with Tiltrotators have recently been observed. The advantages of Tiltrotator are improved task efficiency and reduced operating time by reducing unnecessary behavior. We need simulation models that can improve the ability of new people to work and simulate tasks in advance. Thus, in this paper, we developed a simscape-based simulation model and modeling of 6DOF systems for field robots equipped with Tiltrotator. Dynamic modeling of field robot 3D models using Simcape multibody and hydraulic systems of field robots using Simcape Hydraulics were modeled. We applied a PID controller to create a control system that operates along the input angle. Simulation results show that errors occur when comparing input and output angles, but overall, they move along input angles.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2013.05a
• /
• pp.77-78
• /
• 2013