• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.870-875
• /
• 2008

The main objective of this paper is to control a trajectory tracking of the fish-mimetic robot by CPG (Central Pattern Generator), which is biological approach. CPG is biological neural networks that generate rhythmic movements for locomotion of animals, such as walking, running, swimming and flying. Animals show marvelous ability of autonomous dynamic adaptation for an unsteady fluid dynamic environment or various environments. So, we propose the 3-DOF CPG controller to track the trajectory of the fish robot in plane motion. The conformity of the proposed control algorithm is validated by simulation for a fish robot model, which is made by a commercial dynamic package.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.1
• /
• pp.41-47
• /
• 2000

A better tracking performance can be achieved, if visual sensors such as CCD cameras are used in controling a robot manipulator, than when only relative sensors such as encoders are used. However, for precise visual servoing of a robot manipulator, an expensive vision system which has fast sampling rate must be used. Moreover, even if a fast vision system is implemented for visual servoing, one cannot get a reliable performance without use of robust and stable inner joint servo-loop. In this paper, we propose a dynamic control scheme for robot manipulators with eye-in-hand camera configuration, where a dynamic learning controller is designed to improve the tracking performance of robotic system. The proposed control scheme is implemented for tasks of tracking moving objects and shown to be robust to parameter uncertainty, disturbances, low sampling rate, etc.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.191-196
• /
• 2003

This paper presents a method to design an adaptive controller for the kinematic model of a two-wheeled welding mobile robot (WMR) with unknown parameters. We propose a nonlinear controller based on the Lyapunov function to enhance the tracking properties of the WMR. The WMR can track any smooth curved welding path at a constant velocity of the welding point. The system has three degrees of freedom including two wheels and one torch slider. Torch slider motion is used for fast tracking. To design the tracking performance, the errors from WMR to steel wall is defined, and the controller is designed to drive the errors to zero as fast as possible. The effectiveness of the proposed controller is shown through simulation results.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.694-696
• /
• 2000

In this paper, the Direct Learning Control is applied to robot's trajectory tracking control to solve the problem that lies in the existing Iterative Learning Control(ILC) and the tracking Performance is analyzed and the better approach is searched using computer simulation and experiments. It is assumed that the Direct Learning Control(DLC) is saved onto memory basically after obtaining control input Profiles for several Periodic output trajectories using the ILC. In case the new output trajectory has special relations with the previous output trajectories, there is an advantage that the desired control input profile can be obtained without iterative executions only using the DLC. The robot's tracking control system is comprised of DSP chip. A/D converter, D/A converter and high-speed pulse counter included in the control board and the performance is examined by carrying out the tracking control for the given output trajectory.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.912-915
• /
• 1996

The computed-torque method (CTM) shows good trajectory tracking performance in controlling robot manipulator if there is no disturbance or modelling errors. But with the increase of a payload or the disturbance of a manipulator, the tracking errors become large. So there have been many researches to reduce the tracking error. In this paper, we propose a new control algorithm based on the CTM that decreases a tracking error by generating new reference trajectory to the controller. In this algorithm we used the concept of sliding mode theory and fuzzy system to reduce chattering in control input. For the numerical simulation, we used a 2-link robot manipulator. To simulate the disturbance due to a modelling uncertainty, we added errors to each elements of the inertia matrix and the nonlinear terms and assumed a payload to the end-effector. In this simulation, proposed method showed better trajectory tracking performance compared with the CTM.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1205-1207
• /
• 1996

The computed-torque method (CTM) shows good trajectory tracking performance in controlling robot manipulator if there is no disturbance or modelling errors. But with the increase of a payload or the disturbance of a manipulator, the tracking errors become large. So there have been many researchs to reduce the tracking error. In this paper, we propose a new control algorithm based on the CTM that decreases a tracking error by generating new reference trajectory to the controller. In this algorithm we used a fuzzy system based on the rule bases. For the numerical simulation, we used a 2-link robot manipulator. To simulate the disturbance due to a modelling uncertainty, we added errors to each elements of the inertia matrix and the nonlinear terms and assumed a payload to the end-effector. In the simulations of several cases, our method showed better trajectory tracking performance compared with the CTM.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1244-1248
• /
• 2003

This paper describes visual tracking procedure of the underwater mobile robot for nuclear reactor vessel inspection, which is required to find the foreign objects such as loose parts. The yellowish underwater robot body tends to present a big contrast to boron solute cold water of nuclear reactor vessel, tinged with indigo by Cerenkov effect. In this paper, we have found and tracked the positions of underwater mobile robot using the two color information, yellow and indigo. The center coordinates extraction procedures are as follows. The first step is to segment the underwater robot body to cold water with indigo background. From the RGB color components of the entire monitoring image taken with the color CCD camera, we have selected the red color component. In the selected red image, we extracted the positions of the underwater mobile robot using the following process sequences; binarization, labelling, and centroid extraction techniques. In the experiment carried out at the Youngkwang unit 5 nuclear reactor vessel, we have tracked the center positions of the underwater robot submerged near the cold leg and the hot leg way, which is fathomed to 10m deep in depth.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.129-140
• /
• 1998

An interface system was developed to offer the welding capability to a robot controller which had not any embedded function for arc welding before, and also an arc sensor algorithm was proposed for weld seam tracking of the welding robot. For the interface system between the robot controller and welding equipments, data communication software and interface connections were composed. The interface system was mae to correspond welding condition, correction data, operation sequence and current status with the robot controller by mutual had shaking and digital signal transfer. Graphic user interface program developed under the environment of windows made it easy to monitor data communication and operation status, and to control welding and sensing sequence. Arc sensing algorithm proposed in this study to compensate torch position error was based on a fuzzy logic with the variables of current difference and current differenced change at torch weaving extremities. The developed interface system could be successfully implemented in between welding equipments and the robot controller, and showed normal status and exact function in data and signal communication between the systems. The whole robot welding system was then examined to verify its welding and seam tracking capabilities in horizontal fillet, vertical fillet, and 3-dimensional fillet weldment. The experiments revealed sound weld bead shapes and also good seam tracing results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.5
• /
• pp.460-465
• /
• 2013

In this paper, we describe a security robot system to control human's behavior in the security area. In order to achieve these goals, we present a method for representing, tracking and human blocking by laserscanner systems in security area, with application to pedestrian tracking in a crowd. When it detects walking human who is for the security area, robot calculates his velocity vector, plans own path to forestall and interrupts him who want to head restricted area and starts to move along the estimated trajectory. While moving the robot continues these processes for adapting change of situation. After arriving at an opposite position human's walking direction, the robot advises him not to be headed more and change his course. The experimental results of estimating and tracking of the human in the wrong direction with the mobile robot are presented.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.4
• /
• pp.856-861
• /
• 2011

The mobile robot controller is designed to track the target and to maintain the formation at the same time. Formation control is included in mobile robot controller by extending the trajectory tracking algorithm. The dynamic model of mobile robot is used with kinematic model considering the practical physical parameters of mobile robot. The dynamic model of mobile robot transforms velocity control input of kinematic model into torque control input which is the practical control input of mobile robot. Formation controller of mobile robot is designed to satisfy Lyapunov stability by backstepping method. The designed formation controller is applied to the mobile robot for various target movements and simulated to confirm the Lyapunov stability.