• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.2290-2295
• /
• 2005

In this paper, it is developed simulator system of 3 D.O.F parallel robot for educate of expertness. This simulator system is composed of three parts ? 3 D.O.F parallel robot, controller (hardware) and software. First, basic structure of the robot is 3 active rotary actuator that small geared step motor with fixed base. An input-link is connected to this actuator, and this input-link can connect two ball joints. Thus, two couplers can be connected to the input-link as a pair. An end-plate, which is jointed by a ball joint, can be connected to the opposite side of the coupler. A sub-link is produced and installed to the internal spring, and then this sub-link is connected to the upper and bottom side of the coupler in order to prevent a certain bending or deformation of the two couplers. The robot has the maximum diameter of 230 mm, 10 kg of weight (include the table), and maximum height of 300 mm. Hardware for control of the robot is composed of computer, micro controller, pulse generator, and motor driver. The PC used in the controller sends commands to the controller, and transform signals input by the user to the coordinate value of the robot by substituting it into equations of kinematics and inverse kinematics. A controller transfer the coordinate value calculated in the PC to a pulse generator by transforming it into signals. A pulse generator analyzes commands, which include the information received from the micro controller. A motor driver transfer the pulse received from the pulse generator to a step motor, and protects against the over-load of the motor Finally, software is a learning purposed control program, which presents the principle of a robot operation and actual implementation. The benefit of this program is that easy for a novice to use. Developed robot simulator system can be practically applied to understand the principle of parallel mechanism, motors, sensor, and various other parts.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1722-1723
• /
• 2007

This paper describes a simple method to reduce rotation angle error of mobile robot using omni-wheel[3](omni-bot). This method can be applied to not only omni-bot, but also other robot with a large number of servo motor. Robot using many servo motor as omni-bot is complicated for hardware and software, each servo motor has difficulty in synchronizing. Three servo motor, three omni-wheel and three serial servo motor controller is used, PC or Micro Processor interface with the serial servo controller through "SSC100" protocol. In order to check the improvement of the proposed serial servo synchronization compared to existing sequential communication method. comparing object is rotation angle error of omni-bot. The results of this make building of omni-bot system easy and decrease rotation angle error.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.327-332
• /
• 2015

Educational robot was introduced as an effective educational tool is to foster scientific creativity and learn the basic principles of science are applied to change the configuration of the educational after-school learning kits for science education. SMEs as a tool to foster scientific creativity center and a variety of educational robot technology and the wide range of games for students and robotic technology development, existing e-Learning by downloading mp3 music or learning content for the robot, such as the provision of specialized content Although the technology is still being developed to take advantage of the professional community formation is insufficient side. Currently, one-point linkage drag Smart Touch control dynamic motor development does not need this motor development is possible for users to easily.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.183-190
• /
• 2016

In this study, we conduct linear and nonlinear modeling of the DC motor driving system of a wheeled mobile robot, which is a nonlinear system involving dead zone, friction, and saturation. The DC motor driving system consists of a DC motor, a wheel, and gears. A linear DC motor driving system is modeled using a steady-state response and parameter measurements. A nonlinear DC motor driving model is identified with the use of the Hammerstein-Wiener method. By using these models, PID controllers for the DC motor system are then established. Each PID controller is applied as a low-level controller in order to achieve posture stabilization control for the real mobile robot. We also compare the performance of the proposed PID controllers in posture stabilization experiments by using several different final robot postures.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.3
• /
• pp.333-344
• /
• 2014

This is the survey paper on the role of kinematics in robot development. The robot is considered as a form of mechanical systems which includes closed-chain loop system, open-chain loop system and closed and open switching system. To analyze these systems, kinematic notations has been developed in kinematics of mechanical theory since 1955 and has been applied in robotics. Several kinematic notations including Denavit-Hartenberg notations have been reviewed. The status of development of the spherical motor which has a great impact on the future robot advancement has reviewed, and research activity on a spherical motor and its application to 3-D spatial mechanisms at UNIST is introduced. For the open and closed switching mechanical systems, the bipedal robots' walking theories using Zero Moment Point are reviewed. And current status regarding bipedal robots based on newly developed passive dynamic walking theory is reviewed with the research activity at UNIST on this subject.

• Journal of Mechanical Science and Technology
• /
• v.20 no.8
• /
• pp.1159-1168
• /
• 2006

In this paper, a new revolute mobile robot arm with five degree of freedom (d.o.f) was developed for autonomous moving robots. As a control system for the robot arm, a distributed control system composed of the main controller and five motor controllers for arm joints was developed. The main controller and the motor controllers w ε re developed using the ARM microprocessor and the TMS320c2407 microprocessor, respectively. A new trajectory tracking algorithm for the motor controllers was devised employing pre-generated off-line trajectory data. Also, a 3-D simulator based on the openGL software to simulate the motion of the robot arm was developed. To validate the performance of the robot system, experiments to track a specified trajectory were performed.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.886-889
• /
• 2003

In this paper a design of educational robot based on a PC and/or a microprocessor is discussed. The educational robot has 5 DOF and Is made with Swiss Mini Servomotor and Motor Controller IC LM629N. Also, a GUI(Graphical User Interface) is programmed by Visual Basic. This system is completed to consider control properties of the educational robot with 5-DOF that can be changed the parameter of controller by software.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.3
• /
• pp.227-232
• /
• 2013

BCI (Brain Computer Interface) is technology to control external devices by measuring the brain activity, such as electroencephalogram (EEG), so that handicapped people communicate with environment physically using the technology. Among them, EEG is widely used in various fields, especially robot agent control by using several signal response characteristics, such as P300, SSVEP (Steady-State Visually Evoked Potential) and motor imagery. However, in order to control the robot agent without any constraint and precisely, it should take advantage of not only a signal response characteristic, but also combination. In this paper, we try to use the fusion of motor imagery and P300 from EEG for practical use of robot control in BCI environment. The results of experiments are confirmed that the recognition rate decreases compared with the case of using one kind of features, whereas it is able to classify each both characteristics and the practical use technology based on mobile robot and wireless BCI measurement system is implemented.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.11a
• /
• pp.35-36
• /
• 2010

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.60 no.4
• /
• pp.172-174
• /
• 2011

This paper is presented for robot vacuum cleaners using BLDC motors. Recently, BLDC motors which require smaller size, lower sound noise and higher efficiency have been placed in high value-added products including robot vacuum cleaners, vehicle cars and other industry applications. The DC motors have higher sound noise, higher height of the size and lower efficiency due to electro-magnetic structure using the brushes and the commutators. The proposed BLDC motors are appropriate for the motors adequate in regards to higher efficiency, longer life cycle time, and smaller height of the size when robot vacuum cleaners go to some lower height of the space like under sleeping beds and because it's power source is batteries. The paper shows the performance of the BLDC motors designed by the Finite Element Analysis(FEA) of the electro-magnetic field. This paper shows the mechanical structure and the prototype of the motor with the impeller. The performance characteristics of the BLDC motors with the hall sensor controller are verified by the experimental results.