• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.351-361
• /
• 2021

This study proposes an intelligent control of manufacturing robot with dual arm based on neural network for smart factory implementation. In the control method of robot system, the perspectron structure of single layer based on neural network is useful for simple computation. However, the limitations of computation are emerging in areas that require complex computations. To overcome limitation of complex parameters computation a new intelligent control technology is proposed in this study. The performance is illustrated by simulation and experiments for manufacturing robot dual arm robot with eight axes.

• 로봇학회논문지
• /
• 제2권3호
• /
• pp.282-287
• /
• 2007

Humanoid and android robots are emerging as a trend shifts from industrial robot to personal robot. So human-robot interaction will increase. Ultimate objective of humanoid and android would be a robot like a human. In this aspect, implementation of robot's facial expression is necessary in making a human-like robot. This paper proposes a dynamic emotion model for a mascot-type robot to display similar facial and more recognizable expressions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2013년도 춘계학술대회 논문집
• /
• pp.879-880
• /
• 2013

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.93.2-93
• /
• 2001

This paper presents the implementation of fuzzy PI gain scheduling controller (FPICGS) for controlling flexible joint robot arms with uncertainties from time-varying load. The term FPICGS is called based on a combination of fuzzy PI control scheme with a set of rule bases. Principle of design for a FPICGS is given along with the implementation of the designed computer aided control system. The experiment reveals an effectiveness of the proposed control scheme for flexible joint robot arms driven by a DC motorhooked with a spring which both parameters are completely unknown parameters ...

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.36.3-36
• /
• 2001

Imitating animal behaviors is one of the research projects in robotics. This paper presents basic concepts and implementation of ant robots. Our ant robots refer to the robots that are designed and built by imitating ants´ behaviors. ant robot is 5${\times}$5${\times}$6 cm3. A special feature of our ant robot is low cost, we spend under 30 $US for this project.

• 대한임베디드공학회논문지
• /
• 제9권4호
• /
• pp.237-243
• /
• 2014

In this paper we present an real-time obstacle avoidance technique of autonomous mobile robot with steering system and implementation of user interface for mobile devices with Android platform. The direction of autonomous robot is determined by virtual force field concept, which is based on the distance information acquired from 5 ultrasonic sensors. It is converted to virtual repulsive force around the autonomous robot which is inversely proportional to the distance. The steering system with PD(proportional and derivative) controller moves the mobile robot to the determined target direction. We also use PSD(position sensitive detector) sensors to supplement ultrasonic sensors around dead angle area. The mobile robot communicates with Android mobile device and PC via Ethernet. The video information from CMOS camera mounted on the mobile robot is transmitted to Android mobile device and PC. And the user can control the mobile robot manually by transmitting commands on the user interface to it via Ethernet.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.215-226
• /
• 2016

Modeling, control and implementation of a real redundant robot with five Degrees Freedom (DOF) of the SCARA (Selective Compliant Assembly Robot Arm) manipulator type is presented. Through geometric methods and structural and functional considerations, the inverse kinematics for redundant robot can be obtained. By means of a modification of the classical sliding mode control law through a hyperbolic function, we get a new algorithm which enables reducing the chattering effect of the real actuators, which together with the learning and adaptive controllers, is applied to the model and to the real robot. A simulation environment including the actuator dynamics is elaborated. A 5 DOF robot, a communication interface and a signal conditioning circuit are designed and implemented for feedback. Three control laws are executed in: a simulation structure (together with the dynamic model of the SCARA type redundant manipulator and the actuator dynamics) and a real redundant manipulator of the SCARA type carried out using MatLab/Simulink programming tools. The results, obtained through simulation and implementation, were represented by comparative curves and RMS indices of the joint errors, and they showed that the redundant manipulator, both in the simulation and the implementation, followed the test trajectory with less pronounced maximum errors using the adaptive controller than the other controllers, with more homogeneous motions of the manipulator.

• 제어로봇시스템학회논문지
• /
• 제11권4호
• /
• pp.290-296
• /
• 2005

This paper presents the implementation of a crack tracking mobile robot. The crack tracking robot is built for tracking cracks on the pavement. To track cracks, crack must be detected by laser and camera sensors. Laser sensor projects laser on the pavement to detect the discontinuity on the surface and the camera captures the image to find the crack position. Then the robot is commanded to follow the crack. To detect crack position correctly, neural network is used to minimize the positional errors of the captured crack position obtained by transformation from 2 dimensional images to 3 dimensional images.

• EDISON SW 활용 경진대회 논문집
• /
• 제5회(2016년)
• /
• pp.501-505
• /
• 2016

In this study, a robot is implemented in H/W based on four-bar linkage mechanism and Jansen mechanism. Our goal is to finish the given path using given terms. The various programs was used to understand the mechanism in more detail. DISON m.Sketch, EDISON Designer, Theo Jansen Mechanism Optimization Solver. Using these programs, we can design the robot in more dtails and reduce errors and trials. For the design and implementation of a robot, it is need to get joint variable, a foot point, and their relation. Thus, the proposed kinematic analysis is very important process for the design and implementation of legged robots.

• 제어로봇시스템학회논문지
• /
• 제3권4호
• /
• pp.373-380
• /
• 1997

In order to implement the real-time operating systems for robot controller, this paper proposes a systematic method for implementing the real-time kernel under the DOS environment. So far, we designed the robot control software and its own operating system simultaneously. Though robot operating systems have simple structure, it allows the developer to have a surplus time and effort to implement complete robot systems. In addition to this, in most cases of this type, operating systems does not support multitasking function, thus, low level hardware interrupts are used for real-time execution. Subsequently, some kinds of real-time tasks are hard to implement under this environment. Nowadays, the operating systems for robot controller requires multitasking functions, intertask communication and task synchronization mechanism, and rigorous real-time responsiveness. Thus, we propose an effective and low costs real-time systems for robot controller satisfying the various real-time characteristics. The proposed real-time systems are verified through real implementation.