• Proceedings of the Korea Information Processing Society Conference
• /
• 2021.11a
• /
• pp.1091-1092
• /
• 2021

본 논문은 3차원 데카르트 좌표계에 따른 다 관절 로봇 제어의 제어 알고리즘을 제안하려 한다. 제안 기법을 통해 놓고자 하는 좌표 공간의 값을 통해 서보 모터가 취해야 할 각도 값을 구할 수 있고, 이를 통해 다 관절 로봇을 보다 쉽게 제어할 수 있다.

• Journal of Navigation and Port Research
• /
• v.27 no.3
• /
• pp.273-282
• /
• 2003

This paper proposes a sensor-fusion technique where rho data sets for the previous moments are properly transformed and fused into the current data sets to enable accurate measurement, such as, distance to an obstacle and location of the service robot itself. In the conventional fusion schemes, the measurement is dependent only on the current data sets. As the results, more of sensors are required to measure a certain physical promoter or to improve the accuracy of the measurement. However, in this approach, intend of adding more sensors to the system, the temporal sequence of the data sets are stored and utilized for the measurement improvement. Theoretical basis is illustrated by examples md the effectiveness is proved through the simulation. Finally, the new space and time sensor fusion (STSF) scheme is applied to the control of a mobile robot in the indoor environment and the performance was demonstrated by the real experiments.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.561-562
• /
• 2009

The needs for inspection automation for more systematic and efficient maintenance were gradually increased by several inspectors and researchers. With the robotic and digital image processing technologies, in this paper, new inspection automation system were introduced and tested in the real PSC box crack inspection procedures The configuration and scheme of robotic inspection and digital image processing algorithms were represented. The designed robotic sensors and image processing system were tested and the feasibility and possibility of the robot based automatic inspection were approved in the real PSC box bridges.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.1014-1017
• /
• 1988

Direct-drive robots have excellent features including no backlash, small friction, and high mechanical stiffness. However, dynamic coupling among joints as well as nonlinear effects become more prominent than traditional robots with reducers. Another critical issue is that the robot becomes more sensitive to the change of load. In this paper, we develop a simple current feedback scheme for reducing the influence of dynamic coupling and load sensitivity on the direct-drive robots. The method is implemented on a 2 d.o.f. planar direct-drive robot. Then the validity of the method is demonstrated through experiments.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.837-838
• /
• 2006

This paper proposes a method of assembling parts using visual servoing in dynamic environment. We use SSD(Sum of Square Difference) based on adaptive template in order to detect a moving object in the case where the robot and the object both move. And the control input of the robot is obtained from the feed-back signal of the feature movement and the feed-forward signal of the camera movement in image plane.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.8
• /
• pp.175-183
• /
• 1996

This paper presents three-dimensional robot task using the vision control method. A minimum of two cameras is required to place points on end dffectors of n degree-of-freedom manipulators relative to other bodies. This is accomplished using a sequential estimation scheme that permits placement of these points in each of the two-dimensional image planes of monitoring cameras. Estimation model is developed based on a model that generalizes known three-axis manipulator kinematics to accommodate unknown relative camera position and orientation, etc. This model uses six uncertainty-of-view parameters estimated by the iteration method.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.888-891
• /
• 1991

In this paper, we have shown a new approach of neural networks for mobile robot motion control under an indoor refracted environment. The vehicle has two powered wheels and four passive casters which support a free motion. And it also uses sonar sensors, infrared sensors, Internal odometer, and contact sensors. Two experiments were conducted to demonstrate our objectives. The first one is that the vehicle executes a reflexive motor control to maintain a constant distance to the boundary. The second one is that as well as the boundary following, the vehicle makes a block obstacle avoidance during its path. Without prior knowledge of external environment. we have accomplished the tasks by employing a simple, reactive stimulus-response neural network scheme associating sensor data with the vehicle's action.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.1
• /
• pp.33-41
• /
• 2000

A monitoring and control system, as a broker to connect work-fields with higher departs, gives a great effect on capacity and reliability of a manufacturing system. However, it is very difficult to construct an integrated monitoring control system in a shop with diverse equipment. This paper proposes a CORBA based scheme to construct an integrated system for monitoring and control of equipment in a machining shop. The system is developed by applying the object oriented technology. Thus, its design and maintenance are not only early but it can cope with variation of production situation flexibly. Finally, we introduce a prototype using a milling machine, a robot, PLC's, etc.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.2913-2921
• /
• 1994

In SMA(shape memory alloy), the degradation by fatigue is one of the most important problems to be overcome, when SMA is used for robot-actuator material. The actuator is operated repeatitively for long time and its repeating operation develops the fatigue degradation of SMA. The fatigue degradation changes the transformation temperature and deformation behavior and results in inaccurate operation control of robot. Accordingly, the changing behavior of transformation temperature and deformation which results from repeating operation is to be investigated in advance and the scheme to resolve those problems have to be made for the design of actuator. In this study, the fatigue tests were carried out on SMA specimens prepared to have different condition of aging time and pre-strain with the direct-current heating-cooling method, which was a general method of operation in robot actuators. The behavior of transformation temperature and deformation were examined and analyzed in each specimen and the study was performed to establish the optimistic manufacturing condition of SMA against the fatigue degradation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.4
• /
• pp.299-309
• /
• 2014

When biped robots make turns, the ability to walk stably and precisely along any circular path is crucial. In this context, inverse kinematics solutions are found for accurate gait realization, and new zero moment point(ZMP) equations are derived with respect to the cyclindrical coordinate system to facilitate generation of stable walking patterns. Then, appropriate steady and transitional walking patterns are both proposed in form of time functons. Subsequently, walking patterns for a path but of different speeds are generated using the functions and associated formulas, and preliminarily checked for stability based on the ZMP equations. Upon comparison of those cases, one can see how and when robots may fall down during circular walking. Finally, those patterns are put to test on the sample robot by ADAMS(R) along with the inverse kinematics solutions and a new balance control scheme compensating for insufficient stability particulary during the initial transition period. Test results show that the robot can walk along the circular path as predicted at a resonably high speed despite the distributed mass and ground contact effects, validating effectiveness of the suggested approach.