• Journal of Korean Society of Transportation
• /
• v.27 no.4
• /
• pp.77-89
• /
• 2009

With an increasing number of cars in Korea, the government is constantly providing roads and their related facilities. However the fundamental problems of cities like the structure of cities and the environment of roads make the traffic congestion of downtowns. To solve this problem the construction of toll roads such as tunnels and bridges is increasing but use rates of drivers is low. With more tolls required, less persons will use the roads. Thus this study is to consider offering discounted charges when using the two or more toll roads together. This study analyzes the impact that discounted charges would bring to the demand. In the meantime we looks into what the proper range should be for the discount. The results of this study are expected to be used as basis for the introduction of a discount system in the future.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.2 s.25
• /
• pp.39-45
• /
• 2003

Roads have been developed throughout the history of mankind, and play a significant role among many traffic facilities for the economy, politics and cultures of our lives. However, the management of roads has not been fully scientific or systematic due to governmental policies focused on construction resulting in damages, and the loss of drawings for existing roads. In this case, it is difficult to manage roads using normal cadastre due to its time consuming work. And, when applying satellite surveying to rapidly extract the centerline of roads, it is impossible to obtain data about the status of internal tunnels. Therefore, this study can be used to extract optimum alignment data of tunnels using the data from satellite surveying, and is a practical paper which can contribute to efficient management and usage of alignment data and road facilities in establishing a HMS(Highway Management System) for the renewal and management of the alignment data of roads, by comparing the data from satellites with the alignment data in existing drawings.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5135-5142
• /
• 2011

A flexible mechanism is proposed in this paper to improve the dynamic response performance of a traffic flow control system in an urban area. The roads, vehicles, and traffic control systems are all modeled as intelligent systems, wherein a wireless communication network is used as the medium of communication between the vehicles and the roads. The necessary sensor networks are installed in the roads and on the roadside upon which reinforcement learning is adopted as the core algorithm for this mechanism. A traffic policy can be planned online according to the updated situations on the roads, based on all the information from the vehicles and the roads. This improves the flexibility of traffic flow and offers a much more efficient use of the roads over a traditional traffic control system. The optimum intersection signals can be learned automatically online. An intersection control system is studied as an example of the mechanism using Q-learning based algorithm, and simulation results showed that the proposed mechanism can improve the traffic efficiency and the waiting time at the signal light by more than 30% in various conditions compare to the traditional signaling system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.485-496
• /
• 2010

An increase in number of vehicles owned by individuals worsens the conditions of parking in residential areas. So to speak, the pedestrians' safety is seriously threatened by illegally parked vehicles on the residential area roads. As a result, the number of vehicle-to-pedestrian accidents has been increasing annually. Also, illegal parking on arterial roads is increasingly becoming common, especially by cooommercial trucks. However, no solution has been found to reduce or eliminate accidents caused by vehicles illegally parked on readside. The result of this study provides the solutions to enhance the safety of residential area roads and arterial roads, from viewpoints of both long-term and short-term, by collecting data about the status of illegal parking and addressing critical problems.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.24 no.3
• /
• pp.73-82
• /
• 2021

Rural roads are the significant infrastructure for developing and managing the rural areas, hence the utilization of the remote sensing datasets for managing the rural roads is necessary for expanding the rural transportation infrastructure and improving the life quality of the rural residents. In this research, the two different methods such as image classification and image segmentation were compared for mapping the rural road based on the given high-resolution satellite image acquired in the rural areas. In the image classification method, the deep learning with the multiple neural networks was employed to the given high-resolution satellite image for generating the object classification map, then the rural roads were mapped by extracting the road objects from the generated object classification map. In the image segmentation method, the multiresolution segmentation was employed to the same satellite image for generating the segment image, then the rural roads were mapped by merging the road objects located on the rural roads on the satellite image. We used the 100 checkpoints for assessing the accuracy of the two rural roads mapped by the different methods and drew the following conclusions. The image segmentation method had the better performance than the image classification method for mapping the rural roads using the give satellite image, because some of the rural roads mapped by the image classification method were not identified due to the miclassification errors occurred in the object classification map, while all of the rural roads mapped by the image segmentation method were identified. However some of the rural roads mapped by the image segmentation method also had the miclassfication errors due to some rural road segments including the non-rural road objects. In future research the object-oriented classification or the convolutional neural networks widely used for detecting the precise objects from the image sources would be used for improving the accuracy of the rural roads using the high-resolution satellite image.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.5
• /
• pp.596-611
• /
• 2007

Resuspended dust from paved roads in Seoul and Incheon metropolitan areas is regarded as one of the major $PM_{10}$ sources in these areas, according to the recent emission estimates using the emission factors compiled in AP-42. It is well known that the AP-42 model for estimating $PM_{10}$ emissions from paved roads requires information on silt loadings of particular paved roads. The conventional AP-42 method (vacuum swept method) for road silt sampling, however, is expensive, time consuming, and dangerous. These drawbacks led us to develop a Mobile Dust Monitoring System (MDMS) capable of doing real time measurements of silt loading of paved roads, thereby we could get higher resolution silt loading data both in terms of time and space without too much human efforts and danger. In this study, for the real-time measurement of silt loading of paved roads, the principle used in the TRAKER method of U.S. Desert Research Institute was employed and the entire sampling systems including data acquisition system were designed for theses purpose and mounted on a SUV. The correlation between the silt loading measured by vacuum swept method and the speed corrected ${\Delta}Dust$ was derived for the vehicle-based silt loading measurements, and then the variations of silt loading on paved roads were surveyed using the MDMS in test routes of Seoul and Incheon. From the results of real-time measurements, temporal and spatial variations of silt loading data together with the existence of hot spots were observed for paved roads in Seoul and Incheon. The result of this study will be employed to estimate fugitive dust emissions from paved roads.

• Journal of Korean Society for Geospatial Information Science
• /
• v.22 no.4
• /
• pp.135-142
• /
• 2014

As interest in social safety has recently increased at the national level, the various activities which can effectively prevent crimes are being carried out. Because the existing maps related to crimes provide the information about the present condition of crimes by administrative district for users, women and pedestrians who go by night could not actually grasp safe roads in advance. Therefore, this study developed the methodology that can easily extract dangerous areas due to crimes by the digital map 2.0. In the digital map 2.0, location and attribute information of center-lines of roads and building layers were used to find dangerous areas of crimes in these layers. Pavement materials and road width which are already built by the attribute information were used in the center-lines of roads. Crossing angles that roads and roads cross each other were additionally extracted and utilized. The attribute information about building types were input in the building layers of the digital map 2.0. The areas that are more the threshold values set by totaling up all the risk scores when considering pavement materials, road width, crossing angles of road, and building types in the center-lines of roads and road crossings were extracted as the dangerous areas that crimes can occur. Verification of the developed methodology was done by experiment. In the spatial apsect, the dangerous areas of crimes could be found by using the digital 2.0, roads, and building layers only through the experiment. In the administrative aspect to prevent crimes, additional installation of safety facilities such as street lights and security lights in the identified areas which are vulnerable for crimes is thought to be increasing safety of dangerous areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.3
• /
• pp.467-475
• /
• 2018

The purpose of this study is to propose the evaluation criteria of asphalt pavement condition in narrow regional road considering the traffic environment in order to reduce road budget of local governments. In general, narrow regional roads are considered relatively less important because they have low travel speed and low traffic volume of heavy-vehicle. Generally, automatic surveying equipment is used for investigations of pavement condition, but the operating costs are not efficient for the narrow regional roads because the cost is too high. This study presents the pavement condition evaluation index suitable for narrow regional roads. In this study, the pavement condition evaluation index is presented considering the traffic environment of narrow regional roads. The pavement condition were classified into three classes based on the crack measured by visual inspection, and the validity of the pavement condition evaluation index presented through the expert's questionnaire survey was examined. Pavement condition for the narrow regional roads was classified into three grades based on the index values calculated by visual inspection. Expert's surveys were conducted to evaluate the validity of the proposed pavement condition evaluation. The proposed evaluation index shows a high correlation with questionnaire survey result ($R^2=0.88$). The proposed evaluation index which is obtained through visual crack inspection under limited conditions can be applied to narrow regional roads. In addition, it is expected that it will be effective not only for road management but also for road management budget by more economical evaluation method of pavement condition.

• Ecology and Resilient Infrastructure
• /
• v.7 no.3
• /
• pp.160-170
• /
• 2020

Railroads and roads are typical linear projects, and their networks are expanding nationwide. To minimize the impact of their development on the environment, ecological disconnection due to the parallel lines of railroads and roads is to be avoided as much as possible. In this study, to examine the environmental impact of railroad and road development, the characteristics of railroads and roads and the differences between them were examined through a comparative analysis of key evaluation items. Based on the result, the road development, unlike the railroad project, suggests items for establishing an efficient land use plan and soil protection as the key evaluation items. There are no specific evaluation items and criteria that can be used to examine the environmental impact of railroad lines located adjacent to roads. In this study, eight evaluation items were suggested by reviewing the relevant literature. In particular, in the strategic environmental impact assessment stage, which examines the adequacy and location feasibility of the plan, the minimum separation distance criteria were proposed to examine in advance the environmental impact of railroads located adjacent to the existing roads. The distances were examined for the previously operated routes, and a distance of less than 200 m was suggested to minimize the environmental impact. The results were compared with those in other studies and analyzed. The results of this study can be used as a basis for examining alternative routes that can minimize the environmental impact of adjacent railroads and roads.

• Journal of Korean Society of Transportation
• /
• v.31 no.2
• /
• pp.3-10
• /
• 2013

Two-lane roads that occupy more than a half of rural highways in Korea have operational problems such as traffic congestion problems due to relatively high traffic volume and safety problems due to overtaking risks in two-lane highways. To solve these problems, a 2+1 road pattern that enables to improve traffic safety and operational efficiency of two-lane highways has been applied in Europe. In this study, in-depth applicability of 2+1 roads to Korean rural highways was investigated based on review results of the successful experience of European 2+1 roads. Then, given the Korean two-lane highway conditions, the service traffic volumes for Korean 2+1 roads was estimated. The analysis results showed that 17,000 veh./day might be the maximum traffic volumes for Korean 2+1 roads.