Browse > Article
http://dx.doi.org/10.5572/KOSAE.2007.23.5.596

Development and Application of Real-time Measurement System of Silt Loading for Estimating the Emission Factor of Resuspended Dust from Paved Road  

Han, Se-Hyun (Department of Environmental Engineering, Inha University)
Won, Kyung-Ho (Department of Environmental Engineering, Inha University)
Jang, Ki-Won (Department of Environmental Engineering, Inha University)
Son, Young-Min (Department of Environmental Engineering, Inha University)
Kim, Jeong-Suk (Department of Environmental Engineering, Inha University)
Hong, Ji-Hyung (Environmental Cap Research Department, National Institute of Environmental Research)
Jung, Yong-Won (Department of Environmental Engineering, Inha University)
Publication Information
Journal of Korean Society for Atmospheric Environment / v.23, no.5, 2007 , pp. 596-611 More about this Journal
Abstract
Resuspended dust from paved roads in Seoul and Incheon metropolitan areas is regarded as one of the major $PM_{10}$ sources in these areas, according to the recent emission estimates using the emission factors compiled in AP-42. It is well known that the AP-42 model for estimating $PM_{10}$ emissions from paved roads requires information on silt loadings of particular paved roads. The conventional AP-42 method (vacuum swept method) for road silt sampling, however, is expensive, time consuming, and dangerous. These drawbacks led us to develop a Mobile Dust Monitoring System (MDMS) capable of doing real time measurements of silt loading of paved roads, thereby we could get higher resolution silt loading data both in terms of time and space without too much human efforts and danger. In this study, for the real-time measurement of silt loading of paved roads, the principle used in the TRAKER method of U.S. Desert Research Institute was employed and the entire sampling systems including data acquisition system were designed for theses purpose and mounted on a SUV. The correlation between the silt loading measured by vacuum swept method and the speed corrected ${\Delta}Dust$ was derived for the vehicle-based silt loading measurements, and then the variations of silt loading on paved roads were surveyed using the MDMS in test routes of Seoul and Incheon. From the results of real-time measurements, temporal and spatial variations of silt loading data together with the existence of hot spots were observed for paved roads in Seoul and Incheon. The result of this study will be employed to estimate fugitive dust emissions from paved roads.
Keywords
Fugitive dust; Emission factor; $PM_{10}$; Resuspended dust; Silt loading;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 California Air Resources Board (1997) Entrained paved road dust. (available at http://www.arb.ca.gov/ei/areasrc/fullpdf/full7-9.pdf)
2 EPA (1995) Compilation of air pollutant emission factors, AP-42, Fifth Edition, Volume I: Stationary point and area sources, Prepared by U.S. Environmental Protection Agency, Research Triangle Park, NC, USA
3 Fitz, D. (2001) Measurements of $PM_{10}\;and\;PM_{2.5}$ emission factors from paved roads in california, Final report, Contract No. 98-723, California Air Resources Board
4 Fitz, D. and K. Bumiller (2005) Measurement of $PM_{10}$ emission rates from roadways in Las vegas, Nevada using a SCAMPER mobile platform with real-time sensors, 14th International Emission Inventory Conference, U.S. Environmental Protection Agency, Las Vegas, NV, USA
5 Langston, R., R.S. Merle Jr, D. Hart, V. Etyemezian, H. Kuhns, J. Giles, D. Fitz, K. Bumiller, and D. James (2007) The preferred alternative method for measuring paved road dust emissions for emissions inventories: 'Mobile technologies vs. the traditional AP-42 methodology', 16th Annual International Emission Inventory Conference, U.S. Environmental Protection Agency, Raleigh, NC, May 15-17, 2007, USA. (available at http://www.epa.gov/ttn/chief/conference/ei16/session11/langston.pdf)
6 Venkatram, A. (2000) A critique of empirical emission factor models: a case study of the AP-42 model for estimating $PM_{10}$ emissions from paved roads, Atmospheric Environment, 34(1), 1-11   DOI   ScienceOn
7 환경부(2005b) 대기 Inventory 작성과 배출계수 개발 및 오염배출량 산정연구, 최종보고서
8 정용원, 한세현, 원경호, 장기원, 홍지형(2006) 포장도로 재비산먼지 배출량산정법의 현황, 대한환경공학회지, 28(11), 1126-1132   과학기술학회마을
9 Gaffney, P., R. Bode, and L. Murchison (1995) $PM_{10}$ emission inventory improvement program for California, California Air Resources Board, USA
10 Watson, J.G. and J.C. Chow (2000) Reconciling urban fugitive dust emission inventory and ambient source contribution estimates: Summary of current knowledge and needed research, DRI Document No. 6110. 4F, Desert Research Institute, Reno, NV, USA
11 Etyemezian, V., H. Kuhns, and G. Nikolich (2006) Precision and repeatability of the TRAKER vehicle-based paved road dust emission measurement, Atmospheric Environment, 40(16), 2953-2958   DOI   ScienceOn
12 국립환경과학원(2006a) 대도시 대기질 관리방안 조사연구-미세먼지 생성과정 규명과 저감대책 수립, 최종보고서, 한국대기환경학회
13 국립환경과학원(2005) 이동오염원 대기오염물질 배출량 산정 편람, 국립환경과학원 대기총량과
14 Abu-Allaban, M., J.A. Gillies, A.W. Gertler, R. Clayton, and D. Proffitt (2003) Tailpipe, resuspended road dust, and brake-wear emission factors from on-road vehicles, Atmospheric Environment, 37(37), 5283-5293   DOI   ScienceOn
15 EPA (2001) Procedures document for National Emission Inventory, Criteria air pollutants 1985-1999, March 2001, EPA-454/R-01-006. (available at http://www. epa.gov/ttn/chief/trends/procedures/ neiproc_99.pdf)
16 김운수(2004) 서울시 미세먼지 배출량 조사.분석 및 관리 방안 연구, 서울시정개발연구원
17 김현구, 정용원, 홍지형(2004) 전국 시도별 비산먼지 배출량 산정(2001년도), 한국대기환경학회지, 20(2), 263-276
18 국립환경과학원(2006b) CAPSS 비산먼지 배출량 신뢰도 향상을 위한 배출계수 보완, 최종보고서
19 EPA (1993) Emission factor documentation for AP-42: Section 13.2.1 Paved roads, U.S. Environmental Protection Agency, Contract No. 68-DO-0123, MRI Project No. 9712-9744
20 Etyemezian, V., H. Kuhns, J. Gillies, J. Chow, K. Hendrickson, M. McGown, and M. Pitchford (2003b) Vehicle-based road dust emission measurement-Part III: effect of speed, traffic volume, location, and season on $PM_{10}$ road dust emissions in the Treasure Valley, ID, Atmospheric Environment, 37(32), 4583-4593   DOI   ScienceOn
21 EPA (2006) AP-42 Emissions Factors. Miscellaneous Sources, Section 13.2.1. Paved Roads. U.S. Environmental Protection Agency, Research Triangle Park, NC, USA. (available at http://www.epa.gov/ttn/chief/ap42/ch13/final/c13s0201.pdf)
22 Kuhns, H., V. Etyemezian, D. Landwehr, C. MacDougall, M. Pitchford, and M. Green (2001) Testing re-entrained aerosol kinetic emissions from roads (TRAKER): a new approach to infer silt loading on roadways, Atmospheric Environment, 35(16), 2815-2825   DOI   ScienceOn
23 환경부(2005a) 수도권 대기환경관리 기본계획
24 Chow, J.C., J.G. Watson, D.H. Lowenthal, P.A. Solomon, K. Magliano, S. Ziman, and L.W. Richards (1992) $PM_{10}$ source apportionment in California's San Joaquin Valley, Atmospheric Environment, 26A(18), 3335-3354
25 Midwest Research Institute (1996) Improvement of specific emission factors. Final report for Clark County Department of Comprehensive Planning, prepared by Midwest Research Institute, 425 Volker Boulevard Kansas City, MO, 64110, USA
26 Dames and Moore (1999) Silt loading measurements for Clark County paved roads. Final report for Clark County Regional Transportation Commission, 7115 Amigo Street, Suite 110, Las Vegas, NV, 89119, USA
27 Etyemezian, V., H. Kuhn, J. Gillies, M. Green, M. Pitchford, and C. Watson (2003a) Vehicle-based road dust emission measurement-Part I: Methods and calibration, Atmospheric Environment, 37(32), 4559-4571   DOI   ScienceOn