• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.6
• /
• pp.116-126
• /
• 2013

Weather factor to affect driver's driving environment are due to changes in weather conditions is caused rainfall, snowfall, fog etc and the reducing of road capacity and because deteriorating weather could be affect the headway and vehicle speed and the decrease in lane caused by an accident occurs that was analyzed that bad weather occur congestion greater than on the clear day. Bad weather to reduce of the driver's visibility was analysed the sensitive to changes in travel speed and traffic accident to appears high characteristics according to weather conditions on the expressway(higher speed) than general road. As a result, visibility have been determined to be important factor in changes of the highway traffic flow characteristics. Therefore, in this study, we selected traffic volume and travle speed that have a major impact on high-speed expressway basic segments as importance effect factor and we selected to subject of analysis among the Metropolitan Expressway that it could be obtained certain level of traffic volume data and we studied the changing of expressway traffic flow due to change visibility after the collecting of meteorological and traffic data. In order to perform this study, data collection and analysis methods were established through the existing literature and we had selected level of visibility of the expressway and we had performed the statistical verification. Finally, we had calculated the rate of change of expressway traffic flow characteristics due to visibility and we had come up with a way to apply at capacity and service level analysis.

• Fashion & Textile Research Journal
• /
• v.24 no.4
• /
• pp.471-478
• /
• 2022

In roadside workplaces, more attention should be paid to the safety of workers. The roadside workers underestimate the effect of the brightness of their clothes and judge that drivers will recognize them easily, and the drivers misjudge that the roadside workers are far away and that the vehicle can be stopped in sufficient time. Therefore, customized safety education reflecting this and wearing work clothes with certified visibility functions are required. In Korea, it is not compulsory for roadside workers and vehicle guide attendants to wear work clothes with a visibility function. In this study, the distance ahead perceived by drivers was measured using manikins wearing certified and non-certified reflective safety vests. The perception distance of the non-certified reflective safety vest was 1.4 times longer than that of the certified reflective safety vest, thus confirming the importance of wearing a certified reflective safety vest. To prevent roadside workers from suffering traffic accidents, we propose the enactment of a law that makes it mandatory for them to wear high-visibility safety clothing. Specifically, Article 32 of the Enforcement Regulation of the Road Traffic Act should include high-visibility safety clothing in life protection equipment, and additionally, to prevent secondary accidents, we propose the enactment of a law requiring the installation and wearing of certified reflective safety vests in vehicles.

• Journal of the Society of Disaster Information
• /
• v.4 no.2
• /
• pp.68-91
• /
• 2008

Our country is consuming huge source of revenue to improve geometric structure of road with a view to improve safety of the road. However, it is more efficient to provide high-quality pavement markings to the road users. For this purpose, in this study, it is considered the optical theory related to retroreflectivity of pavement marking along with the our country's study literature and foreign. And also considered ur country standard related to pavement marking, made pavement marking sample and measured retroreflectivety. For the experiment, it is selected colors of normal temperature-type paints, grading and content of glass bead as experiment factors. After it is made the same conditions like construction spot, measured retroreflectivity according to the combination of factors and analyzed the optimization of factors.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2765-2770
• /
• 2008

The purpose of tunnel ventilation system for long road tunnels is to keep certain levels of Visibility Index and the concentration of CO. Additional equipments such as jet fans are used in road tunnel to discharge pollutants in the road tunnel. The control algorism of tunnel ventilation system takes the value of sensors as input, and then gives the operation method of jet fans in tunnel as output. Information on the variation of CO concentration in tunnel when jet fans are running is needed to minimize their operation time. Numerical analysis is used in this paper because of the difficulty of conducting experiments under standard condition for ventilation of road tunnel. The concentration of CO has been calculated by using 3-dimensional CFD under transient condition with speed of cars, quantity of air ventilation, and the results for various operation position of jet fans are compared.

• The Journal of Bigdata
• /
• v.2 no.2
• /
• pp.129-140
• /
• 2017

Weather acts through low visibility, precipitation, high winds, and temperature extremes to affect driver capabilities, vehicle performance (i.e., traction, stability and maneuverability), pavement friction, roadway infrastructure, crash risk, traffic flow, and agency productivity. Recently a variety of road weather big data sources such as CCTV, road sensor/systems, car sensor have been developed to solve the weather-related problems, This study identifies and defines the types and characteristics of these sources to suggest how to utilize them for car safety and efficiency as well as road management through analyzing domestic and oversea cases of road weather big data applications.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.2 no.4
• /
• pp.274-278
• /
• 2021

Road structures play an important role in collisions involving vehicles and wildlife. Our study aimed to determine the effect of various types of road structures on the risk associated with roadkill. We surveyed 50 previously identified roadkill hotspots, ranked from one to five according to roadkill density. We collected nine types of road structure data on each hotspot road section. Structures with similar characteristics were grouped together, resulting in five categories, namely, median barrier, high edge barrier, low edge barrier, speed, and visibility. We examined the existence of each road structure category at each hotspot rank. The cumulative link model showed that the absence of bottom blocked median barrier increased the roadkill hotspot rank. Our study concluded that a visual obstacle in the middle of roads by the median barrier decreases wildlife road crossing attempts and roadkill risk. We suggest that future roadkill mitigation plans should be established considering these characteristics.

• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.87-96
• /
• 2016

OBJECTIVES : A fog generated field test was conducted to analyze the relationship between different sizes of variable speed limit signs and the legibility distance under various fog density conditions. By using this study, appropriate sizes of signs can be selected depending on the density of fog. METHODS : An actual tunnel was selected as the area for this test, as other places cannot maintain the fog condition because of rapid air current. A total 121 subjects were recruited for this test, which took place over the course of four days. The test on the first day was conducted under normal weather conditions for comparison. Visibility-distance detecting sensor was used to measure the visibility distance due to the fog density time, simultaneously with the evaluation of legibility distance by subjects. RESULTS : The test results show the relationship between the different sizes of signs and the legibility distance corresponding to the visibility distance due to both non-fog and fog generated conditions. According to the technical test results, appreciable amount of reduction in legibility distance due to fog was resulted in all sizes of signs. Moreover, the legibility distance is reduced proportionately with the decrease in the visibility distance due to fog. CONCLUSIONS : The results of this study can be used to select appropriate sizes of valuable speed signs under fog conditions. Hence, drivers can expect to have more room to respond to adverse weather conditions, thereby reducing the risk of accidents.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.69-72
• /
• 2000

This study proposes a new calculation method for generating real nighttime lamp-lit images. In order to improve the color appearance in the prediction of a nighttime lamp-lighted scene, the lamp-lit image is synthesized based on spectral distribution using the estimated local spectral distribution of the headlamps and the surface reflectance of every object. The principal component analysis method is introduced to estimate the surface color of an object, and the local spectral distribution of the headlamps is calculated based on the illuminance data and spectral distribution of the illuminating headlamps. HID and halogen lamps are utilized to create beam patterns and captured road scenes are used as background images to simulate actual headlamp-lit images on a monitor. As a result, the reproduced images presented a color appearance that was very close to a real nighttime road image illuminated by single and multiple headlamps.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2003.11a
• /
• pp.252-254
• /
• 2003

In this study, it was purposed to develop the new method for the prediction of pollutant concentration in road tunnels. The new method was the use of artificial neural network with the back-propagation algorithm which can model the non-linear system of tunnel environment. This network system was separated into two parts as the visibility and the CO concentration. For this study, data was collected from two highway road tunnels on Yeongdong Expressway. The tunnels have two lanes with one-way direction and adopt the longitudinal ventilation system. The actually measured data from the tunnels was used to develop the neural network system for the prediction of pollutant concentration. The output results from the newly developed neural network system were analysed and compared with the calculated values by PIARC method. Results showed that the prediction accuracy by the neural network system was approximately five times better than the one by PIARC method. ill addition, the system predicted much more accurately at the situation where the drivers have to be stayed for a while in tunnels caused by the low velocity of vehicles.

• Journal of Auto-vehicle Safety Association
• /
• v.13 no.3
• /
• pp.13-19
• /
• 2021

Fog is a phenomenon caused by condensation of water vapor in the atmosphere, which is when very fine drops of water float in the atmosphere and the distance of visible is less than 1km. Fog dispersion technology is a technology that removing or weakening fog by using artificial methods to reduce damage caused by fog. It is applied differently depending on the temperature of fog generation rather than the cause of fog. This study conducted an experimental study on the fog dispersion mechanism in order to minimize damage caused by fog on the road, and studied two methods of over-cooling dispersion using solid-carbon-dioxide as a dissipated particle and dissipating fog particles through thermal acoustic waves. As a result the two methods proved experimentally that were capable of dissipating fog.