• International Journal of Highway Engineering
• /
• v.15 no.1
• /
• pp.121-126
• /
• 2013

PURPOSES: Road Design Consistency Evaluation can guarantee road alignments with safety factors, however it can be hard work to deal with general car accident factors in only this evaluation index. Ideal Road Design Consistency Evaluation is show the mutual balance of road alignment and human factors with a variety of factors for road safety. METHODS: This study carried out overall road safety evaluations which are methods of running speeding consistency and car platoon safety analysis (driver's behaviors factors) as well. RESULTS: Out of 13 sections in a experimental road layout, safety factors of 8 sections showed 'Good' or 'Fair' status. However, 'Poor' results were found out in 5 sections. Particularly, it showed the different outcomes among the 4 evaluation methods used in this study. CONCLUSIONS: Road safety countermeasures were proposed for the potentially dangerous sections in road which failed to identify in the other methods. This study will contribute toward future study of more reliable Road Design Consistency Evaluation in the future for road safety.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.6
• /
• pp.1507-1516
• /
• 2020

This study analyzed the scenario for road freezing section by applying the road freezing evaluation algorithm. To apply road freezing algorithm, the influencing factors on road freezing were reviewed. Observation data from four points, Mokgam IC, Jeongneung tunnel, Seongsan bridge, and Yeomchang bridge were used for analysis. All observatories are installed on the expressway, and they are classified for the analysis of road freezing characteristics. When the difference between the road surface temperature and dew-point temperature of the road freezing evaluation algorithm was 3℃ or less, the section where road freezing occurred was checked. In addition, road freezing evaluation was derived through the change of the road surface condition and water film thickness of the freezing section.

• International Journal of Highway Engineering
• /
• v.15 no.3
• /
• pp.127-135
• /
• 2013

PURPOSES : The purpose of this study is development of automatic equipment to measure the road water-reservoir which can be one of factors for road traffic safety inspection and its application to safety analysis. METHODS : The scopes of this study are the examination of the riskiness and location of road water-reservoir through literature review, development of appropriate sensor and automatic equipment to survey the road water-reservoir and evaluation of field application. RESULTS: The laser lighting and IR camera were selected to develop the equipment. It was found from the field calibration that there is a high correlation between rutting and road water-reservoir and road water-reservoir caused by rutting can be correctly calculated. About 20.2km of national highway were inspected for case study and field application. It was found from correlation of traffic incident that 2.08km of the latent length for water-reservoir which is related to 12 traffic incidents were analyzed. CONCLUSIONS : This technique can be utilized evaluation method for road condition such as road water-reservoir for conventional evaluation system such as road traffic safety assessment and safety analysis and it can be use to new evaluation system to apply various road condition and traffic condition.

• International Journal of Highway Engineering
• /
• v.19 no.6
• /
• pp.165-173
• /
• 2017

PURPOSES : The current practice in car headlight visibility performance evaluation is based on the luminous intensity and illuminance of headlight. Such practice can be inappropriate from a visibility point of view where visibility indicates abilities to perceive an object ahead on the road. This study aimed at evaluating the appropriateness of current headlight evaluation method. METHODS : This study measured the luminance of object and road surface at unlit roadways. The variables were measured by vehicle type and by headlight lamp type. Based on the measurements, the distance where drivers can perceive an object ahead was calculated and then compared against such distance obtained by conventional visibility performance evaluation. RESULTS : The evaluation method based on illuminance of headlight is not appropriate when viewed from the visibility concept that is based on object-perceivable distance. Further, the results indicated a shorter object-perceiving distance even when road surface luminance is higher, thereby suggesting that illuminance of headlight and luminance of road surface are not the representative indices of nighttime visibility. CONCLUSIONS : Considering that this study utilized limited vehicle types and that road surface (background) luminance can vary depending on the characteristics of the given road surface, it would likely go too far to argue that this study's visibility performance evaluation results can get generalized to other conditions. Regardless, there is little doubt that the current performance evaluation criterion which is based on illuminance, is unreasonable. There should be future endeavors on the current subject which will need to explore study conditions further, under which more experiments should be conducted and effective methodologies developed for evaluating automotive headlight visibility performance. Needs are recognized particularly in the development of headlight visibility performance evaluation methodology which will take into account road surface (background) luminance and luminance contrast from various perspectives as the former indicates the driver's perception of the front road alignment and the latter being indicative of object perception performance.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.1
• /
• pp.105-114
• /
• 2019

Recently, the paradigm of road policy has been focused on user safety. Recently, the number of road facility improvement project has been continuously increased but the economic feasibility (B/C ratio) is insufficient. Therefore, it is necessary to select a reasonable road improvement project through accurate and objective analysis of the road safety evaluation. In this study, to develop a new road safety evaluation method, data were collected based on the current road safety evaluation method for 75 routes including national roads and provincial ones. Based on the collected data, problems were analyzed and utilized as the basic factors of the new road safety evaluation method. Therefore, in this study, traffic accidents were reflected as a general evaluation item by weighing to solve these problems, and the evaluation items were added from experiences and ideas of the local public officials. For each evaluation item, a reasonable weight was determined through AHP (Analytic Hierarchy Process) questionnaire evaluation with highway experts. In addition, the safety index was determined based on the evaluation criteria for each evaluation item. The criteria for evaluating the danger zone are determined by the overall safety index. Finally, the criteria for selection of road improvement projects based on the overall risk level were derived.

• Journal of Korean Society of Rural Planning
• /
• v.16 no.3
• /
• pp.159-171
• /
• 2010

Since rapid industrialization of Korean society, out-of-village roads have been greatly improved, while almost all of in-village roads have not been fundamentally improved yet. Unless village roads should be improved in relatively comparison with trunk roads, it has been widely recognized that grass rooted achievement of accessibility revolution not be realized. In this regard, this study tried to develop evaluation indicators system for improvement of village roads. The evaluation indicator system on village road conditions was proposed which is sub-categorized as structural improvement of road itself, its communication serviceability and public securing level of property rights of road site. The system has 6 indicators(2 of each subcategory);good pavement ratio and over 3m wide road length ratio, ratio of household fronting under 2m wide road and connectivity of road network, ratio of registered as 'road' in land category and ratio of publicly owned road sites. In the final conclusion, village roads in rural Korea have been generally in worse condition regardless of whether prior improvement works or not, except some of recent plan-based improvement villages.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.427-434
• /
• 2000

When a large number of hazardous road cut-slopes are spreaded in widely scattered areas, the effective investigation and evaluation method that is able to decide the risk of hazardous road cut-slopes, is required. Many different evaluation techniques were suggested by many different researchers based on their demands, but there are the limited researches on the experimental evaluation technique which can be utilized by personnel who does not have much experiences on the road cut-slopes. In this study, the appropriate and effective evaluation method of the dangerous slope is suggested and this method can be used by both inexperienced and experienced persons. Therefore, this is the one of the effective ways that can mitigate the possibility of landslides.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.121-131
• /
• 2008

Two dimensional road design is connoting danger factor because different point between design standard and driver's reaction. Consequently two dimensional road design is difficult to recognize problem that happen beforehand when before construction. Therefore three dimensional road design that can grasp problem after completion is required. In this study, three dimensional road was designed to evaluate road that is designed. Road designed by Inroad that is road design program. DTM is created using digital map and elevation data. Three dimensional road was designed by integrated DTM of road and topography. Road design evaluation was performed in three dimension. Driving simulation and sight distance assessment were carried out to estimate stability of alignment. Shadow simulation was executed on icy road section for bad section of icy road surface. As a result of evaluation, this study could confirm shape of road after completion. And sight distance could be calculated and visually confirmed. Also, icy road sections were extracted through shadow simulation.

• International Journal of Contents
• /
• v.16 no.3
• /
• pp.66-86
• /
• 2020

With the rapid growth of high-tech, the development of cultural and creative industries has gradually become the focus of national industrial development. With the proposal of China's "Belt and Road" strategy, the role of cultural and creative industries in the provinces and cities along the "Belt and Road" in the entire international trade is becoming increasingly critical. It is necessary to explore solutions to improve the competitiveness of China's cultural and creative industries, factoring the surrounding cities of the "Belt and Road" as an example. Thus, this paper proposes the six-element diamond model based on innovation capability and government support to render a comprehensive evaluation of the competitiveness of the cultural and creative industries in the 31 provinces and cities across the country. The results show that the overall competitiveness of the 18 provinces and cities along the "Belt and Road" cultural and creative industries is weak. Focusing on the 18 provinces and cities along the "Belt and Road", using the linear regression measurement model quantitative analysis, the four types of influencing factors affecting the development of the competitiveness of cultural and creative industries along the "Belt and Road" were obtained. Finally, according to the four types of influence, the competitiveness improvement plan is proposed from the four aspects: government role, consumption preference, industrial innovation ability, and the introduction of high-quality talent.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.3
• /
• pp.192-197
• /
• 2003

The ‘AEIPR’(Accelerometer Established Inertial Profiling Reference) method has been applied to measure the road profile. The dynamic road profiling method using AEIPR has the advantages of cost effectiveness, measuring speed and relatively high reliability. However, it is required to improve the double integration algorithm to get the measurement results with the accuracy of hither level. In the first part of this paper, the effective double integration algorithm is suggested and the ‘Road Profiler’ software is developed on the basis of the algorithm. Road profiling tests are performed using the developed ‘Road Profiler’ system on the specially designed tracks for the durability tests and the various types of pubic roads. Test results are shown and evaluated by the international road evaluation indicies and classification.