• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.326-331
• /
• 2006

The durability of recent motors is longer than the past one because there are the rapid technique development of the automobile industry and the vehicle maintenance of users. And then the importance of the durability test due to vibration is increased from day to day. So full vehicle and parts companies accomplish the durability test using various methods. The most public test method among them is the reliable field test but it bring on higher cost and period of the development process. The durability test using MAST(multi axis simulation table) is a solution in order to improve the development process of automobiles. Generally its excitation source uses the optimized road profiles that are obtained by the road test of belgian road, country road, cobbleston road and so on instead of a real field but the interrelations and influences accordingly vehicle damage are considered by a field test between specific roads and real fields in the first place. Therefore this study, in order to accomplish a basic research for the durability test using the MAST, performed on the real field driving test at various domestic roads and the results which are analyzed by PSD(power spectrum density) are compared with relative sensitivity among the roads. Consequently they can present a basic material for generation of road profiles which is applied to the durability test using MAST.

• Journal of Korean Society of Forest Science
• /
• v.108 no.3
• /
• pp.322-328
• /
• 2019

The purpose of this study was to provide basic data for maintenance and repair of the forest road surfaces using the light drop weight test (LDWT), density test, and grain size analysis at four sites in Yeongyang-gun Mt. (2011y, 2014y, 2016y, and 2017y). In terms of the density test results, the opening density in 2011 was the highest at $2.0694g/cm^3$, and the opening density in 2017 was the lowest at $1.7443g/cm^3$. The grain size analysis showed that the proportion of large aggregates was highest at the opening in 2017, and the proportion of large aggregates decreased with the delay of opening date. From the LDWT results, $E_{vd}$ (the dynamic deformation coefficient) of the 2011y forest road was $35.7MN/m^2$, 2014y was $30.5MN/m^2$, 2016y was $28.6MN/m^2$, and 2017y was $23.5MN/m^2$. The $E_{vd}$ value for the oldest forests opened with the 2011y forest road was the highest, the average $E_{vd}$ value of the center portion was $21.45MN/m^2$, the average $E_{vd}$ value of the wheel portion of the banking part was $31.31MN/m^2$, and the average $E_{vd}$ value of the wheel portion of the cut part was $36.71MN/m^2$.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.9-18
• /
• 2012

PURPOSES : This study evaluated the field applicability and laboratory performance of warm-mix asphalt (WMA) as an alternative technology in asphalt pavement. METHODS : The pilot road using two different types of WMA mixture and one HMA mixture was constructed in Waegwan-Seokjeok road construction site and the mixtures were sampled at the asphalt plant for laboratory testings. The field applicability was assessed in environmental aspects, such as $CO_2$ emission, and in aspects of constructibility using the existing equipment and procedure, i.e., thickness and density measurement. The laboratory testings included the moisture susceptibility test by AASHTO T283, dynamic modulus test, triaxial repeated load permanent deformation test, and the fatigue test. RESULTS : The temperatures for production and compaction of WMA were $20{\sim}30^{\circ}C$ lower than those for HMA and therefore, the noxious gas emission were significantly reduced. The field density of WMA pavements was similar or better than that of HMA pavement. From the laboratory testings, it was found that WMA mixtures exhibit comparable performance to HMA mixture in moisture susceptibility, permanent deformation, and fatigue performance. CONCLUSIONS : With these results, it would be concluded that WMA could replace the existing HMA technology without any significant issue. To support this conclusion, it is necessary to track the long-term performance of WMA in pilot road.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.233-240
• /
• 1997

The study presents the linear dynamic analysis of multi-girder steel bridges under vehicular movement to examine the performance characteristics due to the various structural and loading conditions. The road surface roughness and bridge-vehicle interactions are considered. The road surface profiles for the approaching roadway and bridge decks are generated from power spectral density functions for different road roughness conditions. A new filtering method using the wheel trace is proposed to obtain the more rational bridge-vehicle interactions from the randomly generated road surface. The possible settlement condition between the bridge deck and approaching roadway is also included. The dynamic responses of various bridges designed according to current design practice are examined, in which important structural parameters(such as span length, girder spacing, etc.) are considered systematically. In addition to the basic loading conditions due to a single truck passing on the bridge, the traffic conditions of multi-truck traveling either consecutively on the same lane or side-by-side on the adjacent lanes are also evaluated.

• Proceedings of the Korean System Dynamics Society
• /
• 2003.08a
• /
• pp.1-24
• /
• 2003

The purpose of this paper was developing a development density control model for urban growth management, using system dynamics modeling. The density control model was developed to see how urban growth, transition, and decay occur depending on the interaction among population, houses, industry structure, land and urban infrastructure such as road, water supply, and sewage treatment facilities. Suggesting adequate level of development density control using the model was another purpose of this paper. The model was applied to An'yang city to estimate the maximum number of population, industry structures, houses, and cars that can be adequately sustained with the current An'yang city's infrastructur capacity. The computer simulation results shows that the city is overpopulated by some 90,000 people. To reduce the population to the adequate level that the current urban infrastructure can sustain, the current city regulation on floor area ratio are needed to be strengthened at least 20 to 35%.

• International Journal of High-Rise Buildings
• /
• v.13 no.1
• /
• pp.57-67
• /
• 2024

With the requirement of high quality and three-dimensional urban development, the public space areas city-center rail transit stations is expanded from the plots defined by the road network density to the plots defined by the three-dimensional public space density, covering the internal and external paths of the plots, which brings about the resilient pattern of plot utilization. This paper uses the isochronous three-dimensional influence realm model around the station areas to quantitatively analyze and compare the surrounding three-dimensional path density of public space, and initially proposes flexible use patterns of differently scaled plots under the multi-scale plots linkage, to effectively promote the overall accessibility of the station realm space.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.5
• /
• pp.757-767
• /
• 2016

The power spectral density (PSD) for the road surface roughness on the bridges of minor roads in Wonju city and Hoengseong-gun, Gangwon-do is presented. To obtain the PSD, the road surface roughness on 18 different bridges with various superstructure type and span is measured by GPS at every 10 to 30cm interval. Assuming the PSD as the stationary normal probability process with zero mean value, the PSD of measured road surface roughness is obtained by applying the Maximum Entropy Method (MEM). A simple formula in evaluating the PSD of RC slab bridge, Rahmen bridge and PSC I-girder bridge which is applicable to the dynamic response analysis of bridges considering the road surface roughness is proposed. Using the calculated PSD curves, the road surface conditions on the 18 bridges are evaluated. The statistical relationship between the PSD and the IRI is presented by applying linear regression and correlation analysis.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.5
• /
• pp.48-58
• /
• 2003

This study was carried out to select proper species for early stage replantation in granite forest road cut-slope. From one to thirteen year elapsed forest roads in five regional areas of Chungcheong-do and Kyungsangbuk-do, sample plots were selected, and their vegetations and environmental factors were investigated. Soil organic matter, total nitrogen, soil moisture content, and bulk density in the granite weathering soils were below 0.5%, 0.02%, 10%, and above 1.2g/$cm^3$, respectively. The environmental factors affecting distribution of species in the granite forest road were the elapsed year, elevation, cut-slope aspect, and cut-slope. Sowing plants of Dactylis glomerata, Lolium perenne, and Eragrostis curvula were found in the early stage of forest road-cut. Annual herbs of Youngia denticulata, Erigeron annuus, etc. were found in the 2-3 years elasped forest road-cut. Perennial herbs of Artemisia princeps var. orientalis, Miscanthus sinensis, etc., parachute woody plants of Weigela subsessilis, Pinus densiflora, etc., and gravitative trees of Prunus sargentii, Lindera obtusiloba, Quercus sp., etc. were found in the forest road cut-slope after 3 years of road-cut. Leguma of Lespedeza cureata, Amorpha fruticosa, Lespedeza bicolor, Pueraria thunbergiana, Albizzia julibrissin, etc., herbs of Artemisia keiskeana, Artemisia princeps var. orientalis, Miscanthus sinensis, etc., and woody plants of Rubus crataegifolius, Weigela subsessilis, Zanthoxylum schinifolium, Pinus densiflora, etc. were considered as proper species for replantation in granite forest road cut-slope.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.97-110
• /
• 2021

This study estimated the delay factor, which is the ratio of travel time at the speed limit and travel time at the actual speed using real-time traffic information in Seoul. The actual travel speed on the road was lower than the maximum speed of the road and the travel speed was the slowest during the rush hour. As a result of accessibility analysis based on travel speed during the rush hour, the travel time at the actual speed was 37.49 minutes on average. However, the travel time at the speed limit was 15.70 minutes on average. This result indicated that the travel time at the actual speed is 2.4 times longer than that at the speed limit. In addition, this study proposedly defined the delay factor as the ratio of accessibility by the speed limit and accessibility to actual travel speed. As a result of delay factor analysis, the delay factor of Seoul was 2.44. The results by the administrative district showed that the delay factor in the north part areas of the Han River is higher than her south part areas. Analysis results after applying the relationship between road density and traffic volume showed that as the traffic volume with road density increased, the delay factor decreased. These results indicated that it could not be said that heavy traffic caused longer travel time. Therefore, follow-up research is needed based on more detailed information such as road system shape, road width, and signal system for finding the exact cause of increased travel time.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2283-2291
• /
• 2010

This paper evaluated the effectiveness for the case of it introduced the bimodal tram for the capital area adaptability of the bimodal tram in the limelight as the new transportation means of the next generation for capital area major transportation corridor. The KTDB with 1,142 zones was utilized for the analysis and the major transportation axis around the main road in which the traffic is high. The analysis index selected around the transportation index in which it can show up by the bimodal tram application and the decrease rate of the road traffic density, the travel time change, the carbon emission quantity change, and etc. was chosen as a result. It was analyzed as the axis in which the bimodal tram adaptability effect that it is high with the section this relative including the major analyzed result west AnSan IC~ Songsan Bridge, the SuWon terminal ~ SaDang station, the UiJungBu terminal ~ DoBongSan station, and etc. can be appeared and it was predicted that the travel demand reduction on the road of about 4~6% showed up.