• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.4
• /
• pp.457-461
• /
• 1999

Recently, increasing usage of diesel vehicle, many countries try to reduce the pollutant materials by emission regulation standard. Particularly, in our country, the supplement ratio of diesel vehicle is high, and air pollution by particulate matter(PM) is very serious. So, in theoretical study wer analyzed the formation principle of gaseous emission and PM, the characteristics of CVS-75 mode. In experimental study, we tested exhaust gas reduction of emission and PM, the characteristics of CVS-75 mode. In experimental study, we tested exhaust gas reduction of disel oxidation catalyst(DOC) by CVS-75 mode in light duty diesel vehicle. In case of an automobiletest with the 2,956cc diesel engine which DOC was equipped, CVS-75 mode which is similar to driving conditions on the road was chosen as the restrictive mode of light duty diesel automobile in our country. According to the Pt, the reduction rate of exhaust emission was estimated with using 0.1% high sulfur fuel and 0.05% low sulfur fuel.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.05a
• /
• pp.165-167
• /
• 2012

The purpose of this study is introduction of social and economic benefits of environmental improvements of Korea green road certification system. Focus of Evaluation Criteria is possibility of quantification on environmental improvements. Proposed evaluation items is noise, air pollution, water quality, ecological and green spaces, waste, and space resistance. The results of this study is expected to be used to support of Green Roads Rating System in korea.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.185-186
• /
• 2001

미세입자의 배출원을 추정하기 위해서는 수용지점에 영향을 미칠 수 있는 배출원의 화학적 특성에 관한 정보를 필요로 한다. 수용모델(chemical mass balance model, CMB)의 경우, 모델수행에 필요한 정보는 각각의 배출원에서 배출되는 입자의 화학적 구성성분특성을 파악하는 것이 가장 중요하다(Waton et al., 1984; U. S. EPA, 1987; 강병욱 등, 2000) 이러한 배출원으로는 각종 산업배출원, 자동차, 토양, 도로 비산먼지 등 지역의 특성에 따라서 다양한 배출원들이 대상이 될 수 있다. (중략)

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.127-133
• /
• 1998

The atmospheric deposition flux was measured with dustfall from July of 1997 to July of 1998 at nine sampling sites located in Tae-an peninsula to examine the seasonal variations. The results showed that the average dry deposition was higher in spring than the other seasons. Thus, it is considered that yellow sand is one major source of the additional deposition flux in spring. There also appeared the higher measurement of deposition at the sites nearby road (like Hagampo, Bangali and Sinduri) in summer, and it is assumed that the heavy traffic caused by summer visitors was the main factor of that. For more accurate study, the qualitiative analysis should be taken on the deposited materials.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.1
• /
• pp.18-24
• /
• 2003

Vehicle emission is one of the major sources of air pollution, and provides some undesirable effects on the atmospheric environment and human health. In this study, the driving data were recorded during road tests in Seoul metropolitan wet and analyzed by statistical techniques. The objective of the study is to analyze the driving Patterns of passenger car that influence on emissions in urban driving. The results show that the average speed is around 29.2 km/h, and the average fuel economy is 10.23 km/$\ell$. The vehicle speed of Seoul metropolitan area is slower, and the stop-and-go operation is more frequent than CVS-75 test mode which is used far emission and fuel economy test.

• Journal of the Korean earth science society
• /
• v.24 no.5
• /
• pp.411-419
• /
• 2003

The assessment of environmental impact on NO$_2$ (or TSP) emitted by vehicles is important for local residents from the point of view of their health and environmental protection. In the course of field investigations, correct concentrations are measured and meteorological data are observed for numerical simulation. To determine background concentration for numerical simulation, annual average concentrations of NO$_2$ (or TSP) are estimated using the Puff-Plume model. If the estimated result affects the environment, it must be considered in the environmental conservation activity. To make the process of a estimation of environmental assessment more easily, this system is developed. Moreover, this system was supplied a Graphic User Interface (GH) for the user who calculated the concentration of air pollution exhausted from the traffic on general roads except special roads such as interchanges and entrances to tunnels. This system can offer not only the numerical result but also a graphic display. Even a beginner who is not a professional programmer can calculate the result easily.

• Journal of Environmental Impact Assessment
• /
• v.9 no.4
• /
• pp.277-290
• /
• 2000

The purpose of this study is to identify the problems of environmental impact assessment(EIA) and to suggest new EIA technology. The problems of EIA in Korea can be summarized as follows. First, the EIA does not reflect the impact of policy, plan and program on environment. Second, the project EIA does not consider the cumulative impacts such as additive impacts, synergistic impacts, threshold/saturation impacts, induced and indirect impacts, time-crowded impacts, and space-crowded impacts. Third, the EIA techniques in Korea are not standardized. Finally, the present EIA suggests only alternatives to reduce adverse impacts. To solve above-mentioned problems, the development of new EIA technology is essential. First, the new EIA technology should be developed toward pollution prevention technology and comprehensive and integrated environmental management technology. Second, new fields of EIA for pollution prevention contain strategic environmental assessment, cumulative impacts assessment, socio-economic impact assessment, cyber EIA and EIA technology necessary after the reunification of Korean Peninsula. Third, EIA technology for integrated environmental management contains the development of integated environment assessment system and the development of packaged EIA technology. The EIA technology for integrated environmental assessment system contains (1) development of integrated impact assessment technology combining air/water quality model, GIS and remote sensing, (2) integrated impact assessment of EIA, traffic impact assessment, population impact assessment and disaster impact assessment. (3) development of integrated technology combining risk assessment and EIA (4) development of integrated technology of life cycle assessment and EIA, (5) development of integrated technology of spatial planning and EIA, (6) EIA technology for biodiversity towards sustainable development, (7) mathematical model and GIS based location decision techniques, and (8) environmental monitoring and audit. Furthermore, there are some fields which need packaged EIA technology. In case of dam development, urban or industrial complex development, tourist development, landfill or combustion facilities construction, electric power plant development, development of port, road/rail/air port, is necessary the standardized and packaged EIA technology which considers the common characteristics of the same kind of development project.

• Journal of ILASS-Korea
• /
• v.29 no.2
• /
• pp.53-59
• /
• 2024

Cars are one of the main causes of air pollution in large cities, and 34.6% of domestic air pollution emissions come from mobile sources, of which cars account for 69.6%. In particular, the importance of nitrogen oxides (NOx) and particulate matter (PM), which are major pollutants in diesel vehicles, is increasing due to their high contribution to emissions. Therefore, in this study, the problem of natural regeneration caused by low exhaust gas temperature during low speed and low load operation was solved by applying a complex regeneration DPF that is not affected by temperature conditions to large diesel vehicles with higher driving time and engine displacement than small and medium-sized vehicles. And the feasibility of application to large diesel vehicles was reviewed by measuring the emission reduction efficiency. As a result of the reduction efficiency test on the actual vehicle durability product, PM showed a reduction efficiency of 84% to 86%, and the reduction efficiency of gaseous substances showed a high reduction efficiency of over 90%. The actual vehicle applicability test was completed with three driving patterns: village bus vehicle, police car, and road-going construction equipment vehicle, and no device problems occurred until the end of the test. Both load and no-load smoke measurement results showed a smoke reduction efficiency of over 96%.

• Asian Journal of Atmospheric Environment
• /
• v.8 no.4
• /
• pp.202-211
• /
• 2014

In this study, long-term rainfall data with irregular spatial distribution in Seoul, Korea, were separated into individual precipitation events by the inter-event time definition of 6 hours. Precipitation washout of $PM_{10}$ and $NO_2$ concentrations in the air considering various complex factors were analyzed quantitatively. Concentrations of $PM_{10}$ and $NO_2$ in the atmosphere were lower under condition of rainfall compared to that of non-precipitation, and a noticeable difference in average $PM_{10}$ concentrations was observed. The reduction of concentrations of $PM_{10}$ and $NO_2$ by rainfall monitored at road-side air monitoring sites was also lower than that of urban air monitoring sites due to continuous pollutant emissions by transportation sources. Meanwhile, a relatively smaller reduction of average $PM_{10}$ concentration in the atmosphere was observed under conditions of light rainfall below 1 mm, presumably because the impact of pollutant emission was higher than that of precipitation scavenging effect, whereas an obvious reduction of pollutants was shown under conditions of rainfall greater than 1 mm. A log-shaped regression equation was most suitable for the expression of pollutant reduction by precipitation amount. In urban areas, a lower correlation between precipitation and reduction of $NO_2$ concentration was also observed due to the mobile emission effect.

• Spatial Information Research
• /
• v.18 no.3
• /
• pp.85-94
• /
• 2010

This study presented a method to allocate RFID reader sites for the weekly no driving day program. In resent years, three metropolitan cities begin to operate the system to resolve the traffic jam, air pollution, and oil cost, which is expected to be operated across the country in a few years. In this regard, the accurate verification of the observance of the cars which are participated in the system is needed so that the more benefits are rewarded to observing participants but not violating ones. Thus, this study distinguished road sections where the system of the Daegu metropolitan city cannot determine the observance of the participated cars when the cars detour the RFID readers by employing a set of data from the traffic census, digital maps, and terrestrial photographs of the superstructures on the roads. Then, the appropriate sites for additional RFID readers were determined based on those sections in the road network and the types of the road superstructures.