• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.1739-1742
• /
• 2011

Public transportation network in our country is concentrated and advanced focusing on urban area in order to secure economic feasibility. As a result, as dependence on private vehicles is relatively getting higher in public transportation vulnerable area, traffic problem occurs since the average running speed in urban area is 22.5km/h. This paper has an objective to suggest an improvement plan by selecting public transportation vulnerable area, and defining according to urban structure, formation and function, and understand traffic characteristics and draw problems. As a method selecting public transportation vulnerable area, an area with high division rate of vehicle was selected as a primary proposed site by calculating division rate of means of public transportation according to area. Final proposed site was selected by using GIS Buffering technique aiming at selected proposed site, and selecting non-benefit area 500m outside, which is the road limit distance from each subway and bus station. Lastly, the degree of improvement effect was studied by constructing imaginary public transportation network aiming at final proposed site and comparing to the amount of change in division rate of means of transportation.

• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.53-59
• /
• 2014

PURPOSES : This study estimated an asphalt pavement internal behavior under uphill lanes considering reducing speed of heavy truck on uphill slope. METHODS : Truck performance curve which has been adapted to "Korea Highway Capacity Manual" was analyzed. And asphalt pavement internal behaviors were estimated with Multi-layered elastic analysis using KPRP(Korea Pavement Research Program) dynamic modulus prediction equations. RESULTS : As a result, it is shown that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% climbing slope, it's speed reduced to 25.4 km/h, at same time frequency in asphalt layer decrease to 67.2% and it's dynamic modulus degrades to 30.9%. Based on these results, internal behavior as decreasing vehicle speed on uphill lanes were estimated. CONCLUSIONS : From the results of Multi-layered elastic analysis, internal behavior showed that when the standard truck drives 2.0 km at a speed of 80 km/h in 8% slope on uphill lanes, vertical strain was increased to 44.4% at the bottom of surface course, and lateral tensile strain was increased to 20.5% at the bottom of base course.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.15-20
• /
• 2011

This study was conducted to evaluate the characteristics of installation dimensions of speed control humps based on the theoretical dynamic analyses. The field surveys of speed control humps were performed first to compare their sizes with those suggested in the installation standard. Then, the displacement response spectra under impact loads were obtained using the single degree of freedom models where the vehicle and human were assumed to combine completely. The analysis results showed that the human perception became larger as the width and height of the humps increased, but the extremely higher uncomfortableness should be avoided. In addition, the ratio between the width and height should be considered when the humps are designed and installed because the ratio governs the vertical acceleration magnitude.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.2
• /
• pp.194-198
• /
• 2012

This paper describes flying inspection apparatus for 22.9kV distribution line. This apparatus is composed of multi-copter(more than 4 propellers), camcorder and remote controller. The existing inspections, such as hot-line inspection job and optical inspection method and distribution Line Checking Robot, have many restrictions. A electric working vehicle and hot-line job license are essential in hot-line inspection job. Besides its high cost, it can't be applied to the electric pole over 18m and road-blocked area. Optical method can't inspect upper side of electric facilities mounted on the electric pole. Robot method can't be applied to the corroded overhead earth wire and nothing of overhead earth wire. To solve the problems, in Korea Electric Power Co., we have applied flying inspection apparatus to the 22.9kV distribution line. The results of trial application show that this paper is practical and effective for the inspection technical method in 22.9kV distribution line

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.535-538
• /
• 2012

Recently active research for ITS(Intelligent Transportation System) helps to build for next generation traffic information system at information society. Build the system for sensing a vehicle speed and traffic information on the road. Provide collected data to driver, flow of overall traffic impacts have a good influence. In this study, research for building the platform and development algorithm that provided from other source processing real-time traffic data provides a more reliable real-time traffic data.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1296-1303
• /
• 2012

There is a certain limit to reproduce phenomena between the real vehicle and road, since the existing methods to verify durability of the wheel are mostly uni-axial tests. And the change of durability of the wheel can't be predicted since these tests don't consider the camber angle and lateral force as important factors. In this paper, the FE models of the wheel-tire and drum are created. Then, the vertical and lateral loads are applied to wheel-tire assembly and the camber angle is applied by inclining the wheel-tire assembly to the drum. Based on the analysis result, the crack position is predicted to be created in the body of the wheel. The variation of the stress according to the camber angle is verified and the maximum spot of the stress changes continually.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.110-116
• /
• 2016

Autonomous vehicles must obey the traffic laws in order to drive actual roads. Traffic signs erected at the side of roads explain the road traffic information or regulations. Therefore, traffic sign recognition is necessary for the autonomous vehicles. In this paper, color characteristics are first considered to detect traffic sign candidates. Subsequently, we establish HOG (Histogram of Oriented Gradients) features from the detected candidate and recognize the traffic sign through a SVM (Support Vector Machine). However, owing to various circumstances, such as changes in weather and lighting, it is difficult to recognize the traffic signs robustly using only SVM. In order to solve this problem, we propose a tracking algorithm with RANSAC-based motion estimation. Using two-point motion estimation, inlier feature points within the traffic sign are selected and then the optimal motion is calculated with the inliers through a bundle adjustment. This approach greatly enhances the traffic sign recognition performance.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.6
• /
• pp.3086-3103
• /
• 2017

Video images captured by vehicle cameras often contain blurry or dithering frames due to inadvertent motion from bumps in the road or by insufficient illumination during the morning or evening, which greatly reduces the perception of objects expression and recognition from the records. Therefore, a real-time electronic stabilization method to correct fuzzy video from driving recorders has been proposed. In the first stage of feature detection, a coarse-to-fine inspection policy and a scale nonlinear diffusion filter are proposed to provide more accurate keypoints. Second, a new antiblurry binary descriptor and a feature point selection strategy for unintentional estimation are proposed, which brought more discriminative power. In addition, a new evaluation criterion for affine region detectors is presented based on the percentage interval of repeatability. The experiments show that the proposed method exhibits improvement in detecting blurry corner points. Moreover, it improves the performance of the algorithm and guarantees high processing speed at the same time.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.6
• /
• pp.43-53
• /
• 2014

Supporting handover functionality in V2I communication environments is important to provide higher quality service to users on the road. Wireless Access in Vehicular Environments(WAVE) standards define some features that devices can communicate with each other more efficiently in vehicular environments but they do not include handover function for providing effective V2I services. In this paper, we introduce a handover scheme in WAVE system and show the performance result of proposed scheme.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.614-622
• /
• 2018

Based on army operating road profile, the endurance test of military vehicle aims to reproduce the similar loading conditions with mixture of proving ground tracks. It is so called as endurance test mode and its optimal generation is important to meet high reliability of endurance test. In this paper, proving ground optimization is proposed to achieve a close match to the target profile. Several performance measures such as torque-revolution counts or transmission ratio for the powertrain system can be considered as one of the objective functions. However, the one-side optimal endurance test mode may give the poor solution in the whole system point of view. To incorporate several goals simultaneously, this paper employs multi-objective optimization technique to generate endurance test mode. One of the most widely used method, weighted-sum method is applied here and the case study is discussed.