• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.3
• /
• pp.153-164
• /
• 2018

Calculating the relevant length of left turn storages in urban intersections is very crucial in road designs. A left turn lane consists of deceleration lanes and left turn storages. In this study, we developed methods for calculating relevant lengths of left turn storages that vary at each intersection using UAV (Unmanned Aerial Vehicle) spatial images. Problems of conventional design techniques are applying the same number of left turn vehicles (N) using Poisson distribution without considering land use types, using a vehicle length that may not be measurable when applying the length of waiting vehicles (S), and using same storage length coefficient (${\alpha}$), 1.5, for every intersections. In order to solve these problems, we estimated the number of left turn vehicles (N) using an empirical distribution, suggested to use headways of vehicles for (S) to calculate the length of waiting vehicles (S) with a help of using UAV spatial images, and defined ranges of storage length coefficient (${\alpha}$) from 1.0 to 1.5 for flexible design. For more convenient design, it is suitable to classify two cases when possible to know and impossible to know about ratio of large trucks among vehicles when planning an intersection. We developed formula for each case to calculate left turn storage lengths of a minimum and a maximum. By applying developed methods and values, more efficient signalized intersection operation can be accomplished.

• Journal of the Korean Society of Safety
• /
• v.30 no.1
• /
• pp.94-103
• /
• 2015

This study analyzes the influence factors on elderly pedestrian accident. Elderly people are easy to be badly injured by car accidents compared to younger people. Therefore, various plans and measures are required to protect elderly pedestrian from accidents. However, pedestrian accidents studies only focused on microscopic factors such as attribute of driver, pedestrian, road design. In order to prevent pedestrian accident and reduce the severity of the accident, not only microscopic factors but macroscopic variables such as urban planning and facility should be considered. In this regard, this study develops an ordered probit model introduced the characteristics of urban facility which were not considered in the previous studies. The result shows that there is higher level of accident severity in such areas as large commercial area, well-developed area with transportation infrastructure service and non-pedestrian safety zone. Thus, various and appropriate countermeasures should be prepared in order that pedestrian accident can be prevented in the areas mentioned above. In addition to the aforementioned variables, it is revealed that other variables including vehicle speed, gender and age of pedestrian, weather condition, type of vehicle, etc. partly affect the severity of pedestrian accident.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.75-83
• /
• 2009

Collision behavior of clash cushion occurs for a second of less than 0.4sec usually so that it is too hard to calculate numerically. Therefore, for development of trash cushion, it rely on full-scale vehicle crash test without any design procedure. Occupant safety indices if calculated from acquired data by data measurement system and collision behavior of vehicle and crash cushion is filming using high-speed camera in the crash test. But practical ufo scope of high-speed camera is limited and it is not using to calculated the occupant safety indices or analyzed the energy dissipated mechanism of crash cushion. This work is to estimate to be suitable or not for compare the data from measurement system with the data from high-speed camera. And also it is to grope for practical use scheme to calculation of occupant safety indices or analysis of collision behavior.

• Journal of the Korea Convergence Society
• /
• v.4 no.2
• /
• pp.21-27
• /
• 2013

Spot welding is automation of assembly process, without increasing the vehicle weight and economy, there is a fuel economy improvement of motor vehicles and to widely used in the automotive industry. But By irregular load from the road surface while at the vehicle is running, stress concentration occurs in the weld point, fatigue failure occurs frequently. Considering change of stiffness is the essential fatigue life of the evaluation spot weld. In this paper, by performing a linear static analysis was to understand the vulnerable part. Acquire to the fatigue properties of the spot weld, take the load history of the three levels in the time domain, was performed by setting as a condition of quasi-static fatigue analysis. and Fatigue life prediction method of the spot weld was by applying the method according to the fatigue damage accumulation and the conventional method was compared analyzed with the results shown.

• Journal of Korea Spatial Information System Society
• /
• v.11 no.1
• /
• pp.137-144
• /
• 2009

Understanding lane markings in a live video captured from a moving vehicle is essential to build services for intelligent vehicles such as LDWS(Lane Departure Warning Systems), unmanned vehicles, video-based car navigation systems. In this paper, we present a novel approach to recognize the color of lane markings and the lane number that he/she is driving on. More specifically, we present a background-color removal approach to understand the color of lane markings for various illumination conditions, such as backlight, sunset, and so on. In addition, we present a probabilistic network approach to decide the lane number. According to our experimental results, the proposed idea shows promising results to detect lane number in a various illumination conditions and road environments.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.2
• /
• pp.108-116
• /
• 2014

With the increasing the importance of emotional quality of vehicle, the sound quality of systems with electric motor components has become increasingly important. Electric motors are used for windows, seats, sun roof, mirrors, steering columns, windshield wiper and climate control blowers, etc. In this paper, a study was conducted to identify sound quality factors that contribute to customer's satisfaction and preference of the window lift system. Jury test for subjective evaluation was carried out and sound quality index was developed. Averaged sound pressure level and sharpness were significant factors when glass moves down. Also, maximum loudness at stop section and averaged loudness were significant factor when glass moves up. Next, noise source identification was carried out using beam forming method during glass transferred section and impulsive noise at stop section. Several improvement methods were applied using the source identification result. And finally, the degree of sound quality improvement was judged using sound quality index.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.77-83
• /
• 2011

This study deals with the effectiveness of roundabout. The goal is to comparatively analyze the operational effectiveness related to the conversion of rotary to roundabout in Korea. In pursuing the above, this study gives particular attentions to investigating the existing 20 rotaries and developing the networks of before-and-after improvement using VISSIM, and comparatively analyzing the effectiveness. The domestic rotaries were analyzed to need many improvements of geometric structure for the effective operation of roundabout. The main results are as follow. First, when the present condition of traffic volume were applied, the operational effect of rotary were evaluated to be better than roundabout, but the difference analyzed to be small. Second, the average delay per vehicle in the rotaries of urban area were analyzed to rapidly increase according to the growth of traffic volume. Finally, the average speed of roundabout were evaluated to be less (about 10km/h) than that of rotary, because the traffic volume of rural area were less than that of urban area.

• Journal of Korean Society of Transportation
• /
• v.28 no.3
• /
• pp.39-49
• /
• 2010

Provision of in-vehicle warning information is of keen interest since it can be effectively used to prevent traffic accident on the road. This study evaluates the effectiveness of information provision modalities based on kansei engineering. Various warning information scenarios using different modalities are devised for the evaluation. Statistical data analysis techniques including factor analysis, correlation analysis, and the general linear model are used to assess the user's affect for information modalities. The evaluation result shows that the provision of visual information consisted of 'text and pictogram' leads to higher understandability. The combination of beep sound and voice message' was identified as a more effective modality for auditory warning. In addition, the red color for the blinking warning signal was preferred by users.

• Korean Journal of Veterinary Service
• /
• v.33 no.4
• /
• pp.401-409
• /
• 2010

From 2006 through 2007, the highest need for the most urgent attention in Gangwon-do Wild Animal Rescue Center was wildlifevehicle collisions (WVC). The Korean Ministry of Environment reported 6543 WVC's in 2005 and 5565 cases of WVC's in 2006. In this study, data from the Gangwon-do Wild Animal Rescue Center was utilized to analyze WVC incidents and the movement of wildlife near roadways in Korea. From 2006 through the first half of 2008, the portable GPS device recorded accident location of the injured wildlife. Attempts were made to track and monitor the movements of four raccoon dogs and five Korean water deers near the roads. One raccoon dog and one Korean water deer were successfully tracked and monitored. Their locations were transmitted to cell phones. The amount of WVC's was highest amongst the roads near the forests of Gangwon-do. The devices installed on the nearby roads did not protect the wildlife from WVC's. Results using the CDMA-type GPS collar showed that wildlife often crossed the road even with devices installed to prevent this from crossing roads. This research analyzed the behaviors of different wildlife animals and WVC's. New preventative measures need to be established to avoid roadkill. It is suggested that new streets be built or for an appropriate speed limit be implemented.

• International Journal of Highway Engineering
• /
• v.16 no.5
• /
• pp.155-164
• /
• 2014

PURPOSES : The purpose of this article is to compare and evaluate the riding comfort of a passenger in tunnels depending on different surface textures of concrete pavement. METHODS : Evaluation of riding comfort is conducted at 17 sections, which have different surface texture such as transverse tinned(TT), longitudinal tinned(LT) and diamond grinded(DG). A triaxial accelerometer was set up on the passenger seat surface of the test vehicle to measure vibrations of an occupant, then the effects of vibration on comfort and health were evaluated by ISO 2631. And microphones were installed at passenger's ears height to measure sound pressure level(SPL) in the test vehicle. Additionally, a surface microphone was installed on the inside of wheel arch to evaluate noise between tire and pavement by NCPX method. All tests were conducted cruising at 100km/h. RESULTS : The results of all tests are as follows. First, both vibration magnitudes for comfort and for health in LT and DG sections are almost same and they represent lower than those in TT sections. Second, the average SPL of DG shows the lowest decibels among them. And third, it is founded that interior noise is significantly affected by noise between tire and pavement. CONCLUSIONS : It may be concluded that DG can provide more excellent riding comfort to passenger than LT or TT. Therefore, it is necessary to consider applying DG to existing pavement surface to improve surface condition when the driving environment especially requires riding comfort like a long tunnel.