• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.1
• /
• pp.70-79
• /
• 2017

This study proposes a method to quickly and accurately acquire distance information on direction signs. The proposed method is composed of the recognition of the sign, pre-processing to facilitate the acquisition of the road sign distance, and the acquisition of the distance data. The road sign recognition uses color detection including gamma correction in order to mitigate various noise issues. In order to facilitate the acquisition of distance data, this study applied tilt correction using linear factors, and resolution correction using Fourier transform. To acquire the distance data, morphological operation was used to highlight the area, along with labeling and template matching. By acquiring the distance information on the direction sign through such a processes, the proposed system can be output the distance remaining to the next junction. As a result, when the proposed method is applied to system it can process the data in real-time using the fast calculation speed, average speed was shown to be 0.46 second per frame, with accuracy of 0.65 in similarity value.

• Journal of the Korean Institute of Gas
• /
• v.22 no.5
• /
• pp.114-123
• /
• 2018

As recognizing the necessity of eco-friendly vehicles in order to reduce air pollution from road sector, Korean government has established and implemented a promotion policy which is encouraging the public transportation companies to purchase CNG buses in replacing diesel buses since 2000s. With CNG bus promotion policy, the number of CNG buses had been increased on the road of metropolitan area and big cities. However, increasing rate of CNG buses had been fluctuated between the decrease and the increase since year 2014. In this study, the impact of fuel cost competitiveness between diesel and CNG on CNG bus increasing volume was testified by simple regression, which was only assumed by precedent research on the CNG promotion policy. And this study suggested the necessity of harmonization among the related policies conducted by related Ministries. Eventually this study should contribute to enhance the validity of CNG bus promotion policy. And it is expected that Korean government should apply the new policy suggestion of this study in the establishment of government's promotion policy on LNG cargo trucks and Zero Emission Vehicles in the future.

• Convergence Security Journal
• /
• v.11 no.4
• /
• pp.59-66
• /
• 2011

Recently, it is very important to establish and predict a traffic policy for expanding social infra structure like road, because the number of cars is significantly increasing. In this paper, we propose and develop an automated system technology based on vision sensor (CCTV) which can provide an efficient information for the traffic policy establishment and expanding the social infra structure. First, the CCTV image is captured as an input of the developed system. With this image, we propose a scheme for extracting vehicles on the road and classifying small-type, large-type vehicles based on color, motion, and geometric features. Also, we develop a DB (database) system for supplying a whole information of traffic for a specified period. Based on the proposed system, we verify 90.1% of recognition ratio in real-time traffic monitering environment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.28 no.3
• /
• pp.294-305
• /
• 2012

The objective of this study is to estimate the chemical compositions and to identify qualitative sources of fall-out particles in study area. Also, this study used a spatial analysis to estimate spatial distributions and average deposition flux. In this study, the chemical compositions of fall-out particle samples collected at Muncheon lake from May 2010 to January 2011 were analyzed by ICP and IC. The monthly trend of deposition fluxes for fall-out particles showed highest in June ($107.61kg/km^2/day$) and lowest in October ($22.22kg/km^2/day$). The average fluxes of Fe, Si, Al, Zn and Ba are 0.44, 0.24, 0.20, 0.17, $0.09kg/km^2/day$, respectively. Also, the average fluxes of $NO_3^-$, $SO_4^{2-}$, $NH_4^+$, $Ca^{2+}$, and $Na^+$ are 6.48, 5.01, 4.96, 1.75, $1.37kg/km^2/day$, respectively. A Factor analysis identified four sources such as 1) nonferrous metal, motor vehicle, and agriculture, 2) soil, 3) field burning, incineration, and 4) road dust and oil burning. The IDW (inverse distance weighting) spatial analysis method was used to estimate spatial distribution and average deposition flux for fall-out particles. A total average deposition fluxes estimated in Muncheon lake were 936.15 kg/month. The spatial distribution trend of deposition flux showed higher at site 1 and 2 than at site 3, 4 because local road is adjacent to the site 1 and 2.

• Asian Journal of Atmospheric Environment
• /
• v.10 no.1
• /
• pp.32-41
• /
• 2016

Particle-phase concentrations were measured at 10, 80, and 200 m from the roadside of a national highway near Seoul in January and May 2008. The highway has two lanes each way, with an average hourly traffic volume of 1,070 vehicles. In January 2008, $PM_{10}$ concentrations decreased from 10 to 80 m but increased at 200 m. Black carbon (BC) decreased only slightly with distance due to the influence of biomass burning and open burning from the surrounding areas. In May 2008, the effect of secondary formation on both $PM_{10}$ and $PM_{2.5}$ was significant due to high temperatures compared with January. Because on-road emissions had little effect on secondary formation for a short time, variations in $PM_{10}$ concentrations became smaller, and $PM_{2.5}$ concentrations increased with distance. The effects of fugitive dust on PM concentrations were greater in May than in January when the mean temperature was below freezing. In the composition variations, the amounts of primary ions, organic carbon (OC), and BC were larger in January, while those of secondary ions and others were larger in $PM_{10}$, as well as $PM_{2.5}$ in May.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.5
• /
• pp.2005-2010
• /
• 2011

Since recently exhaust gas regulation for a non-road small engine as well as commercial vehicle engine has been enforced, a carburettor of a small engine should be replaced by an electronic fuel injection system. In this study, the spray characteristics of the 400cc gasoline small engine injector has been experimentally analyzed. Based on the experimental results, suitable injector for the small engine has been selected. Through the test rig measuring spray mass distribution, fuel distribution characteristics of 3 hole- and 6 hole-injector has been analyzed. Through the visualization equipment, injector spray angle, penetration length and spray width have been measured and analyzed. Considering spray characteristics and stability, 6 hole-injector is selected for the 400cc gasoline small engine.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.171-176
• /
• 2016

This paper proposes road safety facilities applying Hot-dip zinc-aluminum-magnesium alloy-coated steel sheets and coils to reduce the loss of function caused by the corrosion of steel in the service state. Vehicle crash simulations and full-scale crash tests were carried out to provide reliable information on evaluating the crash performance with the products of road safety facilities built with hot-dip zinc-aluminum-magnesium alloy-coated steel. From the results of the simulations and full-scale crash tests, the impact behaviors evaluated by the three-dimensional crash simulations considering the strain-rate dependency in a constitutive model were similar to those obtained from the full-scale crash test results. The full-scale crash test results met the crashworthiness evaluation criteria; hence, the proposed bridge barrier in this paper is ready for field applications.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.149-162
• /
• 2012

PURPOSES : The causes of traffic accidents can be classified into the factors of highway users, vehicles, and driving environments. Traffic accidents result from the deficiency in single or combination of these three factors. The objective of this study is to define the "potentially hazardous sections of highway" in terms of traffic safety considering these three factors. METHODS : The test drivers performed repeated driving on these highway sections. The drivers and passengers recorded the sections on which the driving was uncomfortable, and the speeds on the sections excluding the uncomfortable sections were used for the development of the model. RESULTS : The model is composed of three sub-models for each of the horizontal curve, tangent, and the section where the curve starts/ends. The safe driving behavior coefficients by the horizontal curvature were derived by comparing the maximum operating speeds at which the vehicle may slide or deviate and the speeds at which the drivers feel comfort. The safety speeds on tangent were derived by the length of tangent section considering the driver's desired speeds under the traffic condition on which the drivers hardly influenced by the other vehicles. For the sections where the curve starts/ends, the driving behaviors were classified by the distances between the curves, and the safe acceleration/deceleration speeds were derived on which the drivers enter/exit the curve sections safely. CONCLUSIONS : Safety speed could then be regarded that the model suggested in this study may be useful to define the potentially hazardous highway section and contribute the improvement of highway safety.

• Journal of Korean Society of Transportation
• /
• v.19 no.5
• /
• pp.85-97
• /
• 2001

In this study, the purpose behind this research is to propose index to be used for classification of functional the urban streets and to select the feasible length of special management link by the index. This special management link help decision makers found a transportation policy. In order to perform functional classification, index such as average traveled distance, link VKT and VKT per length-lane are use at the study. Average traveled distance index is average traveled distance divided by length of Path k and VKT per length-lane is trip volume characteristic considering lanes and length of Path k. Special management links on which major part of the vehicle are selected with using Path-VKT which represents how many long-distance touring vehicles are on the arterial road. The selection of special management links are performed with network composed of 14 paths (arterial roads) in seoul The total distance of special management links resulted from the above analysis is 141km(35.0% of the whole paths length) and total VKT of the special management links is 4,152,475 VKT(45.2% of the whole paths VKT)

• Journal of Korean Society of Transportation
• /
• v.32 no.3
• /
• pp.198-206
• /
• 2014

According to the statistics of the National Police Agency, red light running (RLR) crashes represent a significant safety issue throughout Korea. This study deals with the RLR crashes occurred at signalized intersections in Cheongju. The objectives of this study are to comparatively analyze the characteristics of between RLR crashes and the Non-RLR crashes, and to find out factors using a Binary Logistic Regression(BLR) model. In pursuing the above, the study gives particular attentions to testing the differences between the above two groups with the data of 2,246 RLR/ 3,884 Non-RLR crashes (2007-2011). The main results are as follows. First, many RLR crashes were occurred in the nighttime and in going straight. Second, the difference between RLR and Non-RLR crashes were clearly defined by crash type, maneuver of vehicle before crash, age of driver (30s, 50s), alcohol use and accident pattern. Finally, a statistically significant model (Hosmer and Lemeshow test : 7.052, p-value : 0.531) was developed through the BLR model.