• Journal of the Korean Society for Railway
• /
• v.12 no.6
• /
• pp.996-1010
• /
• 2009

This paper proposed the framework for the Korean transport accounts which is suitable to Korean situation and can be used for international comparison. The framework is composed of the costs, the revenues and the estimation methodology. This framework is applied to both the Korean road and rail transport, respectively. The result showed that the total cost compared to GDP for the road was higher than the Europe's by 3.23% and that for the rail was lower than the Europe's by 0.67%. Also, the result showed that, in terms of the unit cost, the passenger cost per person-kilometer of road transport was 4.8 times higher than that of rail transport and the freight cost per ton-kilometer of road transport was 2.4 times higher than that of rail transport.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.2
• /
• pp.30-42
• /
• 2021

The amount of compensation and the number of cases owing to car damage from pot holes on highways across the country increased by about 4.2 times and 3.5 times, respectively, in 2019 compared to 2015. Due to the increase in damage caused by these road hazards, the Ministry of Land, Infrastructure and Transport is developing technologies and services that can collect road hazard information by using devices on commercial vehicles (DTGs, black boxes, ADASs). In preparation for the development of these technologies, this study conducted an integrated assessment of algorithms developed for interrupted-flow and uninterrupted-flow traffic under three scenarios in order to provide road hazard information to drivers and road managers. As a result, the overall accuracy of the integrated assessment was derived at 81.88%. Errors generated in this integrated assessment reflect only missing data in less than 1 minute, GPS coordinate location and algorithm related errors, taking into account the purpose and assumptions of the assessment. Among them, we derive an accuracy of 90.15%overall by calibrating GPS error data. The results of this study can be used as basic data for improving the accuracy of location-based information collected by commercial vehicles and for policy development.

• Environmental Engineering Research
• /
• v.17 no.1
• /
• pp.27-34
• /
• 2012

This paper deals with the evaluation of environmental impact of rail and road transport in South Korea. A framework of energy input-output analysis is employed to estimate the total energy consumption and $CO_2$ emission in acquiring and using a life cycle of passenger and freight transport activity. The reliability of $CO_2$ emission based on uncertainty values is assessed by means of a Monte Carlo simulation. The results show that on a passenger-kilometers basis, passenger roads have life cycle emissions about 1.5 times those of rail, while that ratio is ten times greater when the scope of evaluation regards the tailpipe. In the case of freight transport, on a million ton-kilometers basis, the value for road mode is estimated to be about three times compared to those of rail mode. The results also show that the main contribution of $CO_2$ emission for road transport is the operation stage, accounting for 70%; however, the main contribution for rail transport is the construction and supply chain stage, accounting for over 50% emission.

• Journal of Korean Society of Transportation
• /
• v.26 no.5
• /
• pp.143-152
• /
• 2008

Road freight transport industry in Korea contains many and complicate problems such as over supply of the vehicle caused by rapid policy changes, illegal multilevel transactions, poor truck drivers working environment, lack of road freight transport related statistics and so on. Korean government has developed various logistics industrial policy trying to solve these problems in various ways. However the relationship among the problems and action plans has been more and more entangled since the part of suggested policies have made another perverted problems. These complex structure of the toad freight transport industry in Korea makes difficult to identify and to solve the problems. Causal map method helps to give a clean picture to understand the complex industry at a fiance. This study contributes for visualization of the causal relationships among the existing problems and related policy issues in the road freight transport industry in Korea by causal map. This study could be helpful to develop the actual road freight transport industrial policies including the illogical multilevel and unfair transaction in Korea.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.9 no.1
• /
• pp.7-10
• /
• 2003

This study was carried out to investigate vibration shock of electric appliances during transport. Microwave oven, TV, washing machine and refrigerator were singled out as the study items. Transport courses were selected as follow ; an expressway between Kumi and Seoul for TV, an expressway between Kwangju and Seoul for microwave oven and washing machine, a national road between Inchon and Seoul for refrigerator. the values of vibration shock were measured to be ${\sim}3G$ on the national road and 1G on the expressway for up and down direction, ${\sim}0.5G$ on the national road and expressway for back and forth direction and ${\sim}0.8G$ on the national road and expressway for right and left direction. There was no damage during transport. These values were corresponding to grade II of KS A 1026 (General Rules of Performance Testing for Packaged Freights).

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.349-354
• /
• 2009

IPCC reported that 17% of the global GHGs emission is from transport sector. Road transport sector contributes to 70% of transport sector's GHGs emission. Nowadays, Climate change is a global issue and railway transport is marked as an environmental friendly transport mode. For decreasing the GHGs emission of road transport sector which occupies almost of transport sector's GHGs emission, railway transport is emphasized as a environment friendly alternative transport. In this paper, For the promotion of railway transport's role about climate change, I indicated the direction of South Korea's railway transport policy by analyzing some countries' modal shifts and railway transport's climate change policy.

• Korea Trade Review
• /
• v.47 no.4
• /
• pp.271-292
• /
• 2022

In Korea, the road transport industry is pointed out as a major cause of air pollutants, so management control is needed. Existing studies used only positive input and output variables to measure regional efficiency. However, it is necessary to consider the environmental pollution problem in efficiency analysis. In this study, an undesirable SBM analysis using CO₂ was conducted to measure efficiency of domestic regions. In addition, SDM was conducted to examine the ripple effect between domestic regions. As a result of the analysis, the efficiency of the capital area such as Seoul, Gyeonggi, and Incheon was high in the road transport industry. However, the efficiency of the road transportation industry in Daegu and Gangwon was low. In the SDM analysis, it was found that the regional equipment capabilities had a great influence on efficiency. In order to improve efficiency, it is necessary to increase and improve the equipment capacity of the road transport industry.

• Journal of information and communication convergence engineering
• /
• v.10 no.4
• /
• pp.378-383
• /
• 2012

This paper presents the implementation of an automatic road sign recognizer for an intelligent transport system. In this system, lists of road signs are processed with actions such as line segmentation, single sign segmentation, and storing an artificial sign in the database. The process of taking the video stream and extracting the road sign and storing in the database is called the road sign recognition. This paper presents a study on recognizing traffic sign patterns using a segmentation technique for the efficiency and the speed of the system. The image is converted from one scale to another scale such as RGB to grayscale or grayscale to binary. The images are pre-processed with several image processing techniques, such as threshold techniques, Gaussian filters, Canny edge detection, and the contour technique.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.147-163
• /
• 2023

Recently, there has been an increase in the research and development of automated vehicles worldwide. Research focused on automated vehicles in Korea is steadily progressing as a national R&D project. Since automated driving technology comprises diverse technology fields, it is necessary to identify the current position of the research. In this study, we propose a methodology for analyzing research trends using the NTIS data. In addition, we review the effectiveness of the currently developed research trend methodology by deriving primary keywords and major topics using the proposed method. We expect that the methodology developed in this study can be applied to identify and analyze future automated vehicle research trends.

• International Journal of Computer Science & Network Security
• /
• v.21 no.3
• /
• pp.198-205
• /
• 2021

For twenty years, in the EU there has been a trend of a lack of maritime infrastructure and a redundance of the road one, which has a negative impact on the economy. The intermodal transport market structure in the EU has not changed over the past ten years. The stability of transport systems due to the lack of changes in the transport market remains under threat, affecting supply chains and networks through the optimization of warehousing and transportation costs. The research methodology is based on a quantitative assessment of cause-and-effect relations between economic growth and transport and logistics in the EU. A statistical analysis of security indicators, intermodal and modal transport, international trade in goods within the EU and in the world trade in goods, the dynamics of GDP of the EU countries, the level of openness of the EU economy, investment and maintenance costs of different modes of transport and infrastructure has been carried out. The results show that in 2000- 2010 there were positive changes in the transport and logistics infrastructure of the EU, which had a positive effect on trade, openness of the economy of the EU, GDP growth. However, at that time, negative effects of environmental impact and the load on road and rail transport were accumulating. Investment in different modes of transport is limited, and technical maintenance and infrastructure maintenance costs form a significant part of GDP of the EU. A slowdown in economic growth leads to budget constraints and infrastructure financing gap. As a result, the freight and passenger intermodal and modal transport market structure remains virtually unchanged. The load on rail and road transport remains stable, despite the reduced level of transport hazards. Transport productivity has declined over the past ten years. Herewith, the intensification of trade and the openness of the EU economies require constant modernization and innovative renewal. The EU policy in this direction remains normative, uncontrolled, which is reflected in investment differences within the EU and maintenance costs.