• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.710-717
• /
• 2015

This study was conducted investigate population size and habitat use for the conservation and management of the endangered long-tailed goral in the Seoraksan National Park using feces and camera trap during 2010 to 2014 (track survey, camera trap). As a result of feces tracking and camera trap, its population size was estimated as 160 (camera trap)~251 (feces) individuals in the Seoraksan National Park. The goral prefer $35^{\circ}{\sim}60^{\circ}$ (slope), 600~700m (elevation), NE (aspect), 0~50m (distance to stream), 300~600m (distance to road) and bread-leaved forest (forest type) according to field tracking of fecal. Based on field camera trap, we estimated the age classes of goral populations and activity of gorals during day-time (07-18 time, 56.5%) and night-time (18-07 time, 43.5%). Such analyses of population size and habitat use of the goral could be applied as important fundamental data for conservation of gorals and management of their habitats.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.25-37
• /
• 2010

This study is aimed at enhancing mobility rights for the transportation underprivileged that has been made light of relatively compared to normal people. In order to do this, we've suggested having ITS (Intelligent Traffic System) built and improving satisfaction through the test operation of its main system. The existing sound signal device for the visually handicapped has one problem with managing it. Because, the people in charge of it had to visit each problematic site directly to maintain and fix some problems every time it was out of order. Moreover, it couldn't provide sustainable services about voice guidance and the visually handicapped had to control it by either confirming the location of buttons that were installed on the pillar of traffic light and then pressing one of them or using a remote controller on their own. In order to improve such inconveniences, we have created a new typed sound signal device for the visually handicapped by applying the cutting-edge wireless technology based on ergonomics considering actual road situations. Such technology enables it report the status of signal device and light to them by using its voice guidance system automatically every time they have access to it. Additionally, we've already introduced it to a couple of test areas and then known the fact that they recognized traffic situation more conveniently and safely compared to the existing sound signal device. That is above average in terms of satisfaction. In addition to that, we've provided LTS (Location Tracking System - Location-based service intended for elementary students) by utilizing the existing wireless infrastructure and founded the fact that about 87% of their parents were satisfied with the service based on LTS.

• International Journal of Highway Engineering
• /
• v.5 no.2 s.16
• /
• pp.15-24
• /
• 2003

The performance of waterproofing system (WPS) is known to be a function of many complex interaction of material factors, design details, and the quality of construction, but it is mainly determined by the bond strength, which is measured by tensile adhesive strength (TAS) test. to the concrete bridge deck. In this research, eight waterproofing membranes were selected from commercial market and the tensile adhesive characteristics of the WPS on concrete bridge deck were investigated in view of various factor in asphalt pavement. The factors include type of asphalt mixture, pavement thickness, paving temperature and influence of wheel loading. TAS test of different asphalt pavement types showed that TAS of WPS under SMA (Stone Mastic Asphalt) pavement was greater than that under dense asphalt pavement. TAS of sheet membranes was improved as the compaction temperature of asphalt concrete increase, but TAS of liquid membranes were not. The influence of thickness of pavement val minimal with given laboratory test condition. TAS of sheet membranes after wheel tracking test were in the order of the sites under wheel path (UWP), before wheel tracking (BWT) and nearby wheel path (NWP). Since TAS of the same WPS of UWP was higher than TAS of BWT, wheel loading had function of pressing WPS resulting in higher adhesive strength. But liquid membranes were variable on types. The feature of detached interface after TAS test showed that sheet types were all detached in between deck concrete and WPS, and liquid types were detached in between asphalt pavement and WPS.

• Korean Journal of Environment and Ecology
• /
• v.26 no.3
• /
• pp.322-332
• /
• 2012

The objectives of this paper were to investigate home range, habitat selection, and threat factors of leopard cats (Prionailurus bengalensis) living in rural area of Korea. The results based on radio tracking of three leopard cats (two males and one female) can be summarized as follows. First, the average home range of leopard cats were $2.64{\pm}1.99km^2$ (Kernel 95) and $3.69{\pm}1.34km^2$ (MCP 100), and the average size of core areas was $0.64{\pm}0.47km^2$ (Kernel 50). The home range of a male leopard cat that radio-tracked in winter was the largest ($5.19km^2$, MCP 100). Second, the Johnson's habitat selection model based on the Jacobs index showed that leopard cats preferred meadows and paddy fields avoiding forest covers at the second level, whereas they preferred meadows adjacent to streams and avoided paddy fields at the third level. Finally, roadkill could be prime threat factor for the cat population. Therefore, habitats dominated by paddy fields, stream corridors with paved roads, and human settlements with insufficient forest patches could threaten the long-term viability of leopard cat populations. Thus the habitat managements for the leopard cat conservation should focus on the prevention of road-kill and the installation of wildlife passages in rural highways adjacent to stream corridors.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.105-110
• /
• 2009

The On Line Electric Vehicles(OLEV) that can pick up inductive power from underground coils on driving with high efficiency have been developed this year, and is now proposed in this paper. The IPS(Inductive Power Supply) system consists of power supply inverters, power supply rails, pick up modules, and a regulator. There are 3 generations of IPS have been developed so far, and the $4^{th}$ generation IPS is being developed. The $1^{st}$ generation has been demonstrated this Feb. 27, which is equipped with mechanically auto tracking pick-up module with 1cm air gap, and showed 80% power efficiency. The $2^{nd}$ generation IPS applied to an 120kW (average)/240kW(peak) motor powered electric bus has 17cm air gap with 72% power efficiency. For the $2^{nd}$ generation IPS, the Power supply inverter has 440V, 3phase input and 200A @ 20kHz output. The test power supply rail of 240m long is segmented by 60m each, where newly developed core structure and power cable are constructed under the road covered with asphalt of 5cm thickness. The pick-up modules which consist of core, winding wire, and rectifiers are fixed to the bottom of the bus which can carry more than 40 passengers and can pick up max. 60kW. To remove parasitic component and to transfer maximum power between them resonant circuit topology is applied to the primary and secondary sides. The EMF level is below 62.5mG at 1.75m from the center of the road to meet the regulation. Several effective ways of reducing EMF levels have been developed. In addition, effective ways to solve problems related high frequency power cables buried in ground and it's proof from soil have been studied also. This development shows that the IPS system is capable of supplying enough power to the pick-up of OLEV and can reduce battery size, weight and cost, which means the IPS with OLEV is one of the best candidate for EV.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.6
• /
• pp.182-194
• /
• 2017

Most of the drone (Unmanned Aerial Vehicle) research in terms of traffic management involves detecting and tracking roads or vehicles. The purpose of analyzing image footage in the transportation sector is to overcome the limitations of the existing traffic data collection system (vehicle detectors, DSRC, etc.). With regards to this, drones are the good alternatives. However, due to limitation in their maximum flight time, they are appropriate to use as a complementary rather than replacing the existing collection system. Therefore, further research is needed for utilizing drones for transportation analysis purpose. Traffic problems often arise from one particular section or a point that expands to the whole road network and drones can be fully utilized to analyze these particular sections. Based on the study on the uses of traffic survey analysis, this study is conducted by extracting traffic flow parameters from video images(range 800~1000m) of highway unit segments that were taken by drones. In addition, video images were taken at a high altitude with the development of imaging technologies.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.111-120
• /
• 2009

This paper presents a fundamental findings of the functional and structural performance of the porous asphalt concrete coated with MMA resin. To evaluate the structural performance, cantabro, wheel tracking, moisture sensitivity and indirect tensile fatigue tests are performed. The tests results show that the cantabro loss is reduced three times and fatigue resistance is significantly increased after the specimens are coated with MMA resin. However there are little changes in the rutting and moisture damage resistances before and after the coating. Air voids, permeability and BPT(British Pendulum Test) tests are conducted to study the functional performance. It is observed form the tests that the air voids and permeability are slightly decreased after the coating. However, the changes in the air voids and permeability are negligible. The skid resistance of the coated specimens is lower than reference specimens. However, the skid resistance is maintained beyond the level of the reference specimens when silica sands are chipped on top of the coated surface.

• 한국도로학회:학술대회논문집
• /
• 2002.10a
• /
• pp.89-92
• /
• 2002

The objective of this research is to evaluate engineering properties of recycled aggregates, slag as coarse & fine aggregate and waste foundry sand(WFS) as fine aggregate, in hot mix asphalt(HMA). In this research, soundness, gradation and particle analysis, abrasion, specific gravity and absorption test were carried out. The optimum asphalt binder content(OAC) for various HMA combinations of recycled aggregate was determined by Marshall Mix Design. The ranges determined is between 7.2% and 7.5%. Indirect tensile test, resilient modulus test, creep test were carried out for characterization of rutting behavior of various combination of HMA. Judging from the limited tests, the HMA with recycled aggregates is not as good rutting resistance as the HMA with common aggregates. After finishing the Wheel tracking test, the application or feasibility for the use of recycled aggregate as asphalt paving material will be determined.

• International Journal of Highway Engineering
• /
• v.12 no.4
• /
• pp.203-209
• /
• 2010

The base asphalt mixtures that used the waste recycle asphalt correcting from the four different overlay construction sites in Seoul city were made using the foamed asphalt method. The sample mixtures were made in different ratio of the recycle asphalt and new asphalt material and the performance of the mixtures of the different ratio was investigated in the laboratory. The laboratory tests includes the Marshall test, the indirect tensile test, the resilient modulus test, the creep test and the wheel tracking test. The test of the recycle foamed asphalt mixtures(RFA) were compared with the those of the recycle hot mix asphalt(RHA) mixtures. The performance of the RFA is comparable to that of the RHA. On the other hand, the indirect tensile strength of the RFA in dry condition is lower than that of RHA and the indirect tensile strength of the RFA in wet condition is much lower than that of the RHA.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.11
• /
• pp.1150-1156
• /
• 2009

The spread of wireless Internet technology development and applications with location information in the form of location-based services are more varied. In particular, where you recognize the location of objects such as people and things, and to provide valuable services based on ubiquitous, location-based services (Ubiquitous Location Based Services: u-LBS) is emerging as an important service. In this paper precise location data to the car crash through the location and offers related service system. In this paper the precise location tracking proposed by the concept of the Rail, road, to extract the location Data Matching Data and the current location is obtained. System used in GPS Packet and information about the location of the vehicle collision and the collision time, the vehicle consists of NodeID is about. Using these data, a packet is to be created when the conflict between vehicles in the vehicle will be sent to Gateway. Gateway to the packets that were sent from the Server to determine whether the conflict is that in an emergency situation, Emergency Center for location information and let me know whether or not the conflict will be measured. Also, for those on the outside of an emergency such as a family related to the wireless terminal wireless (PDA, cell phone) is to let me know. Server get into the conflict that was configured to store information on the Database. Additionally, the proposed u-LBS system to verify the validity of the experiment was performed.