A study on performance of the recycle asphalt mixtures using the foamed asphalt method

폼드 아스팔트 공법을 이용한 재활용 아스팔트 혼합물의 성능 연구

  • 박태순 (서울과학기술대학교 건설공학부)
  • Received : 2010.11.18
  • Accepted : 2010.11.29
  • Published : 2010.12.15

Abstract

The base asphalt mixtures that used the waste recycle asphalt correcting from the four different overlay construction sites in Seoul city were made using the foamed asphalt method. The sample mixtures were made in different ratio of the recycle asphalt and new asphalt material and the performance of the mixtures of the different ratio was investigated in the laboratory. The laboratory tests includes the Marshall test, the indirect tensile test, the resilient modulus test, the creep test and the wheel tracking test. The test of the recycle foamed asphalt mixtures(RFA) were compared with the those of the recycle hot mix asphalt(RHA) mixtures. The performance of the RFA is comparable to that of the RHA. On the other hand, the indirect tensile strength of the RFA in dry condition is lower than that of RHA and the indirect tensile strength of the RFA in wet condition is much lower than that of the RHA.

서울시내 도로 유지보수 4개 현장에서 수집된 재령 및 물리적 특성이 서로 다른 폐아스팔트를 폼드 아스팔트 공법을 사용하여 기층용 혼합물을 제작하였다. 혼합물은 구재와 신재의 비율을 서로 달리하여 제작하였으며 구재 비율 변화에 따른 성능을 실내시험을 실시하여 분석하였다. 실내시험은 마샬안정도, 간접인장강도, 회목탄성계수, 크리프 시험 및 휠 트레킹 시험을 실시하였으며 시험 결과는 재생가열 아스팔트 혼합물 시험 결과와 상호 비교하였다. 비교 결과, 재생 폼드 아스팔트 혼합물은 소성변형 및 온도 변화에 대한 저항성은 재생 가열 아스팔트 혼합물에 비하여 동등하거나 우수한 것으로 나타났다. 한편 재생 폼드 아스팔트 혼합물의 건조시 간접인장강도는 재생 가열 아스팔트 혼합물에 비하여 낮게 측정되었으며 습윤시에는 구재의 비율과 관계없이 모두 간접인장강도가 낮게 나타나서 습윤 조건에서는 취약한 것으로 발견되었다.

Keywords

References

  1. 박태순, 김용주, 김기연, "반 가열 폼드 아스팔트 혼합물의 개발 및 성능시험 연구", 한국도로포장공학회, 제 4권 1호, pp. 135-147, 2002. 3.
  2. 박태순, 김용주, "폼드 아스팔트의 원리 및 아스팔트 바인더의 거품 특성에 관한 연구", 대한토목학회 학술발표회, 1999. 10.
  3. 박태순, 김용주, 백성현, 김광우, "환경친화적 폐아스팔트 활용공법 의 평가 -폼드아스팔트공법-"한국도로포장공학회 학술발표회, 1999. 11.
  4. 박태순, 최필호, "아스팔트 안정처리토의 역학적 특성 연구" 한국지반공학회, 제19권 제5호, pp.189-197, 2003.10
  5. Acott, S. M., "The Stabilization Of Sand By A Foamed Bitumen A Laboratory And Field Performance Study", MSc. Dissertation, University of Natal, Durban, South Africa, 1980, 192pg
  6. Bowering, R. H.," Properties And Behavior of Foamed Bitumen Mixtures For Road Building", AARB 5th Conference, 1970, 18 pg.
  7. Louisiana Department of Transportation, "Construction of Recycle Foamed Asphalt in I-65"LDOT, report A12-60, 2003
  8. Ruckel, P. J., Kole, L. L., Abel, F., Zator, R. E., Button, J. W. and Epps, J. A.," OAMIX Asphalt Advances", Symposium On Asphalt Pavements Construction: New Materials And Techniques, ASTM Special Technical Publication 724, December 1979, pp. 93-109
  9. Ruckel, P. J., Acott, S. M. and Bowering, R. H.", Foamed Asphalt Paving Mixtures: Preparation Of Design Mixes And Treatment Of Test Specimens", TRR No. 911, 1983, pp. 88-95
  10. Sakr, H. and Manke, P., "Innovation in Oklahoma Foamed Design Procedures". A paper presented at the Washington, D.C.
  11. Tia, M. and Wood, L. E., "Use Of Asphalt Emulsions And Foamed Asphalt In Cold Recycled Asphalt Mixtures". TRR Report No. 898, 1983, pp. 315-321
  12. Tony. Lewis, 1997, "Foamed Bitumen : Expanding Use Worldwide" AIN LEWIS Partner A.A. Loudon & Partners Consulting Engineers South Africa