• International Journal of High-Rise Buildings
• /
• v.3 no.3
• /
• pp.167-171
• /
• 2014

TORANOMON HILLS is the main building of a large-scale re-development project located in the center of Tokyo. This high-rise building has a height of 247 m and 52 floors above ground, 5 floors below ground, and $62m{\times}80m$ in plan. It is used as hotel, residential facilities, offices, shops and conference facilities. The super structure is mainly a rigid steel frame with response-control devices, using concrete-filled steel tube columns. The underground section is a mixed structure composed of steel, steel-reinforced concrete and reinforced concrete framings. The piled-raft foundation type is used. The remarkable feature of this high-rise building is that the motorway runs through the basements of the building, which makes it stand just above the motorway. This condition is an important factor of the building design. The plan shape is designed to fit along the curve of the motorway. Special columns at the corners are required to avoid placing columns in the motorway. This special column is a single inclined column in the lower floors that branches into two columns in the mid-floors to suit the column location in the upper floors. The cast steel joint is used for the branching point of each special column to securely transfer the stress.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.895-898
• /
• 2008

This research paper intends to investigate and review the new technology of patent registration trend for the most recent domestic retaining wall and bridge abutment, and to apply the technology appropriately to the actual retaining wall and bridge abutment construction. Investigated new technological patents for retaining wall include pre-fabricated PC retaining wall construction method that reduces section force with prestressed PS steel bars, pre-fabricated Coupler-Tension retaining wall, clay reinforced retaining wall block for road, earth reinforced retaining wall block that induces uniform settlement, and etc. Investigated new technologies for abutment are abutment construction method that uses sheet pile, monolithic bridge with complex abutments, construction method for abutment bridge, earth reinforced abutment structure and etc.

• Steel and Composite Structures
• /
• v.20 no.5
• /
• pp.999-1022
• /
• 2016

The use of Carbon Fiber Reinforced Polymer (CFRP) to strengthen steel structures has attracted the attention of researchers greatly. Previous studies demonstrated bonding of CFRP plates to the steel sections has been a successful method to increase the mechanical properties. However, the main limitation to popular use of steel/CFRP strengthening system is the concern on durability of bonding between steel and CFRP in various environmental conditions. The paper evaluates the performance of I-section steel beams strengthened with pultruded CFRP plate on the bottom flange after exposure to diverse conditions including natural tropical climate, wet/dry cycles, plain water, salt water and acidic solution. Four-point bending tests were performed at specific intervals and the mechanical properties were compared to the control beam. Besides, the ductility of the strengthened beams and distribution of shear stress in adhesive layer were investigated thoroughly. The study found the adhesive layer was the critical part and the performance of the system related directly to its behavior. The highest strength degradation was observed for the beams immersed in salt water around 18% after 8 months exposure. Besides, the ductility of all strengthened beams increased after exposure. A theoretical procedure was employed to model the degradation of epoxy adhesive.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.2309-2318
• /
• 2010

It is a plan the government increases a railroad section SOC investment, and to activate railroad construction while a railroad wins the spotlight with green transportation. But an error of the demand forecast that is a base of a railroad investment evaluation follows in occurring big, there is it with an operation with an obstacle of a railroad investment. Case of the Incheon International Airport Railroad which went into operation recently, While a present transportation demand showed about 10% than a demand forecasted in a past conference, it was magnified in a social problem. A lot of research was gone on in road project about traffic demand forecast and error, a study to find out the error cause is an insufficient situation although errors of a railroad occurs big. So, this study looked for errors and causes about trip generation model and modes sharing model of railroad demand forecast but it was defined causes so that it can occur similar problems in the future. Especially it investigated causes after comparing rate of development plan for the realization and O/D size in trip generation model and after comparing rate of modes sharing of past and current and conducting a survey for airport users. In conclusion, it suggested method to reduce errors of railroad demand forecasting in the future.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.51-62
• /
• 2014

PURPOSES: This research is a basic study for application method in korea of energy harvesting technology, and it is a research to find out the direction of architectural planning through analyzing cases of interseasonal heat transfer system applied buildings. METHODS : In this paper authors investigate application necessity of energy harvesting technology, we analyzed energy use status of building section through analyzing domestic energy consumption status and analyzed domestic renewable energy generation potential. Also we study the features of energy harvesting technology, interseasonal heat transfer system, and case study on interseasonal heat transfer system applied buildings. RESULTS : On the basis of case study on interseasonal heat transfer system applied buildings, we analyzed feasibility study and classified into four sections(economic, environment, design, applicability), and suggested directions of architectural planning. CONCLUSIONS: Economic renewable energy for public and commercial buildings(hospitals, offices, schools, factories) can be provided effectively using Interseasonal Heat Transfer.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.6
• /
• pp.33-42
• /
• 2010

Travel speed is an important parameter in measurement of road traffic. UTIS(Urban Traffic Information System) was developed as a type of section detector. However, UTIS incur errors caused by irregular vehicle trajectories, wireless communication range and so on. This paper suggests a new model that use an error-filtering algorithm to improve the accuracy of travel speed measurements. In the field test, the variance of the percent errors measured by the new model was reduced. Therefore, it can be concluded that the proposed model significantly improves travel speed measuring accuracy.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.649-656
• /
• 2011

The increase in the traffic demand and behavioral pattern of its use reached the limit for the only means of road construction to bear; thus the multilateral efforts to find a solution to this problem together with the examination and research on this issue, among which the most representative strategy is Ramp Metering System controlling access traffic volume to connection roads. The operation standard and running time was re-established in consideration of geographical conditions and traffic circumstances by considering the standard of operation and running time of the currently operated Jangsu- Jungdong section of the outer ring expressway of Seoul. For this purpose, this research analyzed the operative standard of RMS home and abroad and suggested a new operative standard of ramp metering through the analysis of break points.

• International Commerce and Information Review
• /
• v.9 no.2
• /
• pp.161-182
• /
• 2007

The objective of this paper is to examine the competitiveness of Korean export firms in EU market. In this study, market share index, RCA index, trade specialization index, and market competitiveness index were used as an analytical tool. On the market share index, Korea had a large market share in the SITC section 7(machinery and transport equipment) market in EU. On the RCA index, Korea appeared to have high export competitiveness in the electrical machinery, apparatus and appliances, n.e.s.(not elsewhere specified[stated]), and electrical parts thereof (77), travel goods, handbags and similar containers(83), textile yarn, fabrics, made-up articles, n.e.s., and related products(65), and iron and steel(67) division. On the trade specialization index, however, Korea appeared to tend to decline generally. On the market competitiveness index, Korea appeared to have competitive advantage in the iron and steel(67), machinery specialized for particular industries(72), office machines and automatic data-processing machines(75), electrical machinery, apparatus and appliances, n.e.s., and electrical parts thereof(77), road vehicles(78), and other transport equipment(79) division; but in 29 divisions, the index indicates that Korean firms' competitiveness was low. Finally, the authors discuss the implications of these findings and offer directions for future study.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.1
• /
• pp.57-64
• /
• 2020

The construction market became generally opened to overseas and the domestic construction industry has competed with the international construction enterprise of which technical knowledge is superior. In order to compete with the international construction companies, domestic construction industry needs more continuous promotions on the research and development for improving the level of technique of the construction engineering to meet the international norm. This study aims to suggest the better standards of engineering output such as drawings and specifications to correspond the changing integration system and bidding system in preparation for growing international competition. The study starts with comparison and analyses of domestic and international methods and standards for preparing design drawings. And it continues to delve into actual drawing preparation practices, especially focusing on the ones for road and subway construction. Finally, the study presents a better way of the standardization of the main drawings such as general plan, longitudinal drawing, cross section, structural drawings and temporary structure for new bidding systems of historical cost estimation and whole specification tender and for promotion of international competitiveness.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.4
• /
• pp.41-46
• /
• 2007

This article deals with the design and prototyping of Shift-By-Wire system for an automatic transmission equipped vehicle. In order to manipulate the shifting action electronically, Shift-By-Wire system consists of an electronic shift lever, an electric shift actuator and position sensors. The shift lever is designed to transform the driver's shifting command into an electric signal; it includes the position sensor using non-contact type hall sensor and an additional shifting switch acting as Tip-tronic. For the design of an electric shifting actuator, we investigated the stroke angles and shifting efforts of the manual control lever in each shifting section. And the position sensor of the shifting actuator is designed by using a potentiometer with an optical encoder. Finally the prototype of Shift-By-Wire system was built in a conventional 2.4L class SUV vehicle, and we performed road tests in order to verify its performance.