• The Journal of Engineering Geology
• /
• v.30 no.1
• /
• pp.85-101
• /
• 2020

The estimation of strength parameters is very important for the stability analysis of rock slopes. Various methods for the determination of strength parameters were suggested by various researchers. The number of methods used for the estimation of strength parameters in the stability analysis of rock slopes were investigated based on literature reviews. The frequency of the method determining strength parameters were investigated with respect to failure types. The cohesion and friction angles of the rock and discontinuities are presented with RMR values. The cohesion shows wider range of values relative to those of friction angles according to current studies. Even though RMR does not show any correlation with cohesion values, RMR and the friction angle of the rock clearly shows a positive relationship. Proper methods should be utilized for the determination of strength parameters with consideration for failure types and be proved through literature reviews. The credibility of determining strength parameters is expected to improve if strength parameters data are accumulated from the back analysis performed for failed local rock slopes.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.3
• /
• pp.113-125
• /
• 2000

This study was carried out to introduce current status and development strategy for an environmental restoration of stream side in Japan, and to consider a methodology which could be effectively applied for the environmental restoration of stream side in Korea. The strategy prospects of environmental restoration in Japan were summarized as follows : 1. When we establish the long term erosion control planning, we should make detail planning after considering of a certain block of watershed units. Because most of the disaster is caused by soil movement which was occurred by water contents. 2. Nowadays, the general torrent erosion control planning system in Japan focused on reducing the sediment such as by placement of erosion control facility and by restoration of afforestation, after calculation of several factors including expected amount of sediment, and the different amount of planned sediment and allowable sediment. 3. In the past, the goal of forest conservation and erosion control planing was to fix the amount of soil movement by construction of permanent facilities. While, the goal of forest conservation and erosion control planning in the future needs to change the techniques to a small and middle scale's soil movement which could prevent soil movement from large scale of soil disasters, but allow soil movement effectively. Also, it is considered to change erosion control dams from non passing type to passing type. 4. Restoration of stream-side ecology, erosion control for the conservation of ecology should be planned and conducted cautiously based on concepts of ecology conservation and development of environmentally sound techniques.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.34 no.1
• /
• pp.1-10
• /
• 2016

Seoul, a mega city, contains many features of the modern city. When the disaster or emergency occurs in Seoul, the place for shelter is required for evacuation urgently. There are currently the numbers of shelters in Seoul City, which can hold the twice more capacity of population of Seoul. However, the population distribution fluctuation in the day and the night needs to be considered. Therefore, in order to analyze the actual capacity of shelter, it is necessary to consider the dynamic characteristics of population distribution in the metropolitan area. In the study, the substantial accessibility and the capacity of shelters in Seoul were analyzed by the floating population data of the metropolitan area. The accessibility of shelter was investigated through a network analysis that includes the pedestrian road data, while the capacity of shelter was analyzed by the local differences of daytime population distributions. Finally it was possible to identify the vulnerable areas on the basis of the distribution of shelter in the region.

• Spatial Information Research
• /
• v.7 no.2
• /
• pp.209-221
• /
• 1999

In this research, AVL-GIS(Automatic Vehicle Location System linked with Geographic Information System) system was developed using integration of core techniques of GIS engine written by Java language, GOS(Global Positioning System) and wireless telecommunication interfacing techniques. IDGPS(Inverted differential GPS) techniques was employed to estimate accurate position of mobile vehicle and to supervise their path from AVL-GLS control center system. Between mobile vehicle and AVL-GLS control center system which has spatial data analysis function, road network and rleate ddata base were connected wireless phone to communicate for position an dmessage in real time. The developed system from this research has more enhanced GIS functions rather than previous AVL oriented system which has MDT for message display and voice communication only. This system can support build-up application system such as fleet management like bus, taxi, truck, disaster and emergency and monitoring of transportation status for customer s order via web browser in filed of EC/CALS in low cost.

• Spatial Information Research
• /
• v.18 no.2
• /
• pp.35-44
• /
• 2010

This research intended to estimate the damage information from torrential rainfalls using airphotos and spatial data which have been rapidly increasing their applicability recently. The study area was Bonghwagun of Gyungsangbukdo where the large amount of damages were occurred from torrential rainfall in July, 2008. For this study, the database was constructed for the study area by collecting usable data. The interpretable items from the airphotos of 40cm spatial resolution were selected. Also, the useful GIS layers such as road were selected in the digital map to extract the damage information more accurately and rapidly. The damaged area was easily identified through the comparison of pre- and post-disaster airphotos. The recovery cost was estimated by applying unit cost to the damaged area. GIS's overlay function was used to extract the damage information of for individual items damaged. The method for extracting damages information using GIS and airphotos could be more efficient and cost effective in case of relatively wide and unapproachable damaged areas. It is also expected that the method using high resolution imagery would lead to minimize the secondary damages as well since it can facilitate the damage estimation within short period of time thereby supporting early securing budget for recovery.

• Geomechanics and Engineering
• /
• v.28 no.3
• /
• pp.283-298
• /
• 2022

Landslides triggered by the combination of heavy precipitation and anthropological disturbance in hilly areas cause severe damage to human lives, properties, and infrastructure constructions. A comprehensive investigation of the influencing factors and failure mechanisms of landslides are significant for disaster mitigation and prevention. This paper utilized the combination of detailed geological investigation, physical experimental testing as well as numerical modelling to determine the failure mechanism, and proposed a countermeasures of the Lantian landslide occurred on 2, July 2017. The results reveal that the Lantian landslide is a catastrophic reactivated slide which occurred in an active tectonic region in Southwest China. Because of the unique geological settings, the fully to highly weathered basalts in the study area with well-developed fractures favored the rainwater infiltration, which is the beneficial to slide reactivation. Engineering excavation and heavy precipitation are the main triggering factors to activate the slide motion. Two failure stages have been identified in the landslide. The first phase involves a shallow mass collapse originated at the upper slopes, which extends from the road to platform at rear part, which is triggered by excavation in the landslide region. Subjected to the following prolonged rainfall from 19 June to 2 July, 2017, the pore water pressure of the slope continually increased, and the groundwater table successively rise, resulting in a significant decrease of soil strength which leads to successive large-scale deep slide. Thereinto, the shallow collapse played a significant role in the formation of the deep slide. Based on the formation mechanisms of the landslide, detailed engineering mitigation measures, involving slope cutting, anchor cable frame, shotcrete and anchorage, retaining wall and intercepting ditch were suggested to reduce the future failure risk of the landslide.

• Journal of KIBIM
• /
• v.12 no.4
• /
• pp.104-115
• /
• 2022

Fine Dust in Korea has been classified as a social disaster since 2019 due to continuous increase in concentration of Particulate Matter 10(PM 10) and PM 2.5. The fine dust issue has negative physical and mental impacts, especially on vulnerable population including children and the elderly. Seoul metropolitan government have installed fine dust shelters since 2019. However, there is a lack of research that evaluates spatiotemporal distribution of these facilities. Therefore, the first aim of this study is to find the relationship between PM levels and dust scattering construction sites, or air pollutant emission sites through in depth spatial analyses. The second purpose is to analyze the spatial distribution of PM shelters in Seoul, and to evaluate the location efficiency of them. Kernel density, krigging, and network analyses were conducted, and floating population was considered instead of census data for this research. The reults of network analysis based on the road system showed that Yangcheon-gu, Songpa-gu, Seongbuk-gu, and Dobong-gu were found to need additional fine dust shelters. Also, the results from analyzing the floating population that includes children and the elderly showed that Songpa-gu, Seodaemun-gu, Gangdong-gu, Seocho-gu, and Dongdaemun-gu need more placements of find dust shelters. The results of this study are expected to provide implications for urban planners to enhance find dust shelter placement in urban areas, and vulnerable population issues would be considered in many ways.

• KNOM Review
• /
• v.22 no.3
• /
• pp.25-30
• /
• 2019

For meteorological applications, meaningful results must be derived and provided within time and resource limits. Forecasts through numerous historical data are time-consuming and still have resource limitations in the case of disaster safety-related analyses/predictions such as local typhoon forecasts. Suitable forecasts should be provided without any problems caused by limited physical environmental conditions and when results are to be drawn under time constraints, such as typhoon forecasts and forecast services for flooded areas by road. In this paper, we analyze the application of weather and climate forecasting to provide a suitable forecasting service in both temporal and resource conditions. Through the analysis of execution time according to mesh sizes, it was confirmed that a mesh adjustment can cope with the case of the temporal constraint. In addition, by analyzing the execution time through memory resource control, we confirmed the minimum resource condition that does not affect the performance and the resource usage pattern of the application through the swap and mlock analysis.

• Wind and Structures
• /
• v.37 no.1
• /
• pp.25-38
• /
• 2023

Due to the complexity and difficulty in meeting the multiphase flow complexity, similarity, and multiscale characteristics, the mechanism of snow drift is so complicated that the snow deposition prediction is still inaccurate and needs to be far improved. Meanwhile, the validation of prediction methods is also limited due to a lack of field-measured data about snow deposition. To this end, a field measurement activity about snow deposition around a cube with time was carried out, and the snow accumulation process was measured under blowing snow conditions in northwest China. The maximum snow depth, snow profile, and variation in snow depth around the cube were discussed and analyzed. The measured results indicated three stages of snow accumulation around the cube. First, snow is deposited in windward, lateral and leeward regions, and then the snow depth in windward and lateral regions increases. Secondly, when the snow in the windward region reaches its maximum, the downwash flow erodes the snow against the front wall. Meanwhile, snow range and depth in lateral regions have a significant increase. Thirdly, a narrow road in the leeward region is formed with the increase in snow range and depth, which results in higher wind speed and reforming snow deposition there. The field measurement study in this paper not only furthers understanding of the snow accumulation process instead of final deposition under complex conditions but also provides an important benchmark for validating prediction methods.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.4
• /
• pp.321-328
• /
• 2010

The study performed an actual fire experiment in order to propose the heat release rate of automobile that is the most basic architectural element for the fire safety design in a tunnel, whose importance has been recognized as the underground traffic tunnels are planned in Korean metropolitan cities. The heat release rate of a van is measured by the large scale calorimeter, in which the law of oxygen consumption is applied, and the fire expansion characteristics in a tunnel by placing two passenger cars nearby one another in the tunnel. As the results, the heat release rate of the van was revealed to be 5.9 MW, and carbon monoxide was emitted 482 ppm at a maximum. In case of two passenger car experiment for the fire expansion characteristics, the adjacent car was ignited about 3 minutes 30 seconds after the fire occurrence, and the complete fire was developed after 15 minutes. The maximum heat release was 9 MW. The results from the actual fire experiment can be an important input data for future quantitative analysis as well as an element applicable to a tunnel disaster preventive equipment design.