• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.6
• /
• pp.155-165
• /
• 2013

Recently, geotextile tube method can be widely applied to the river, costal and marine in the construction field, such as embankment, groin, breakwater, dyke structures and so on, in advanced countries of the world. And that has been constructed at the temporary road for incheon, ilsan-bridge construction and coast erosion protection in republic of korea. Geotextile tube is a tube shaped geotextile product and hydraulic pumping filled with dredged soils. In this paper, the numerical analysis was performed to investigate the behavior of geotextile tube with various properties of material character, shape condition, construction pressure and so on. Also, the field test was conducted in order to identify the construction ability of Samangum waterproof embankment using geotextile tube. According to the applied of field test, geotextile tube was 65 m long and 4.0 m diameter. Also, the permeability coefficient and ultimate tensile strength of geotextile tube is $1.6{\times}10^{-1}$ cm/sec and 205.26 kN/m, respectively. As a result of filed test, when filled, geotextile tube does not attain the same as its unfilled theoretical diameter, but may reach approximately of 55 percent of the theoretical diameter. At the time, geotextile tubes were 12.56 m in circumference and filled to a height of about 2.2 m. This paper presents case study on field application and behavior analysis of the saemangum waterproof embankment donggin 1 division construction using geotextile tube.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.7 no.3
• /
• pp.175-181
• /
• 2003

In this reseach, a seepage test is carried out for three kinds of soil using a upward seepage equipment. Reliability about the existing method of pipining investigation were verified making an estimate of the critical velocity, the critical hydraulic gradient, and hydraulic conductivity and so on. Also, sensitive analyses were carried out using Plaxis that is FEM Program about design factors of scour. The height of core had a big infulence on the hydraulic gradient of the embankment's lower part in the result of sensitive anaylsis. Also, second only to the height of core, and the slope of embankment, the width of crest had influence on scour. However, the change of hydraulic gradient in the effluent gateway had a little influence on the crest width of core. Using these results of sensitive analysis on designing, hydraulic gradient in the effluence gateway turned out to be reducing by altering design factors that change of sensitiveness is big, in case of the hydraulic gradient bigger than the standard hydraulic gradient.

• Geomechanics and Engineering
• /
• v.27 no.6
• /
• pp.561-571
• /
• 2021

Cofferdams made of teel sheet piles are commonly utilized as support structures for excavation of sea-crossing bridge foundations. As cofferdams are often subject to tide variation, it is imperative to consider potential effects of tide on stability and serviceability of sheet piles, particularly, ultralong steel sheet piles (USSPs). In this study, a real USSP cofferdam constructed using new construction technology in Nanxi River was reported. The design of key parts of USSP cofferdam in the presence of tidal action was first introduced followed by the description of entire construction technology and associated monitoring results. Subsequently, a three-dimensional finite-element model corresponding to all construction steps was established to back-analyze measured deflection of USSPs. Finally, a series of parametric studies was carried out to investigate effects of tide level, soil parameters, support stiffness and construction sequence on lateral deflection of USSPs. Monitoring results indicate that the maximum deflection during construction occurred near the riverbed. In addition, measured stress of USSPs showed that stability of USSP cofferdam strengthened as construction stages proceeded. Moreover, the numerical back-analysis demonstrated that the USSP cofferdam fulfilled the safety requirements for construction under tidal action. The maximum deflection of USSPs subject to high tide was only 13.57 mm at a depth of -4 m. Sensitivity analyses results showed that the design of USSP cofferdam system must be further improved for construction in cohesionless soils. Furthermore, the 5th strut level before concreting played an indispensable role in controlling lateral deflection of USSPs. It was also observed that pumping out water before concreting base slab could greatly simplify and benefit construction program. On the other hand, the simplification in construction procedures could induce seepage inside the cofferdam, which additionally increased the deflection of USSPs by 10 mm on average.

• Ecology and Resilient Infrastructure
• /
• v.10 no.1
• /
• pp.1-10
• /
• 2023

Developmental technique is mixed bio-polymer and riprap to protect the breaking of a levee. Purpose of new technique is restraint from scour and failure of bankside. Technique of this research can apply shore protection and embankment overflow reinforcement works. Because This technique is easy for construction. In order to apply the technique in fields, It is need to conduct the test-bed or real scale experiment study for stability-guaranteed. In case of embankment overflow reinforcement works, It is difficult to conduct test bed in the field. Real scale experiment was conducted in River Experiment Center. Purpose of real scale experiment is to reappear disaster scene by embankment overflow and verify restraint from scour and failure about the technique. In this experiment results, We can find the strength effect of mixed bio-polymer and riprap.

• Korean Journal of Ecology and Environment
• /
• v.55 no.2
• /
• pp.167-174
• /
• 2022

The Ministry of Oceans and Fisheries promoted the installation of eel-ladder for the purpose of creating inland water resources. Currently, eel-ladder have been installed and operated at the Geumgang Estuary Bank (2018), Yeongam Embankment (2019), and Asanman Embankment (2020). In this study, the number of glass eels in eel-ladder in 2021 was monitored and factors affecting the rise that from ocean to river of eels were investigated. Glass eels in eel-ladder were found when the salinity was relatively low, and they started when the freshwater and seawater temperatures were above 20℃. Comparing the number of occurrences by year, the largest number of glass eels was observed in 2021, but it is judged that this is not according to the distribution of glass eels in sea, but rather as a result of the investigator's eel-ladder repair and guidance on illegal fishing.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.3
• /
• pp.1-17
• /
• 1999

The purpose of this study is to evaluate the creation techniques of artificial wetland, one of biotopes developed to promote biodiversity in urban areas, and to look for improvement steps. Specifically, artificial wetland creation techniques were categorized into living environment and living creature classification. Being living conditions for creations, habitat environment was reviewed with a focus on water and soil environments. Living creatures were classified into plants, insects, fish, and birds. The evaluation of creation techniques was done in post-construction evaluation while considering the creation of habitats for living creatures. Intervention by users, changes in living environment and living species, and relevance of creation techniques were reviewed. Key results of this study are as follows. (1) Water environment for the living environment of creatures provides a suitable environment conditions for the living of creatures through a process easing the use of piped water. Various water depths and embankment appear to have a positive impact on the living of aquatic life. In particular, embankment covered in soil naturally played an important role as a place for the activities of aquatic insects and young fish as well as the growth of aquatic plants. (2) Various aquatic and ground plants to promote insect-diversity, shallow water, and old-tree logs had contributed greatly in increasing the types and number of insects. Aquatic insects. Aquatic insects were seen much particularly in areas where aquatic plants are rich but water is shallow than any other areas. (3) A space piled with stone to provide habitats for fish was not much used. However, it was observed that fish used embankment built with natural stones and embankment using logs in areas where water is deep. In addition, it was confirmed that 1,500 fish that had been released propagated using various depths and places for birth. (4) It was analyzed that techniques (creation of island, log setting, and creation of man-made bird nests) to provide habitats and to attract birds are not serving their roles. In such a case, it is believed that species had not increased due to the smallness as well as isolated features of the area. Based on theoretical review, they are judged to be areas that are likely to be used when a greater variety of birds is introduced. It is judged that attracting and keeping more birds at the site, such spaces need to be linked systematically in the future in terms of building eco-network while ensuring an adequate living areas. (5) In the study areas, users intervened greatly. As a result, a blockage was created preventing the normal growth of plants and non-indigenous plants were introduced. In order to limit the intervention by users, setting enough buffer zones, and environment education programs were urgently required. D/H=1>Hyangkyo> houses on the river>temples>lecture halls. D/H ratio of the backside areas is as follows. D/H=1>Hyangkyo>houses on the river>lecture halls. 4. Inner garden were planted deciduous than evergreen trees with Lagerstroemia indica. Enclosed dominant trees were planted by Pinus densiflora, Querces seuata. construct GEM strain, and examined for the expression and functional stability in microcosms.

• Journal of The Geomorphological Association of Korea
• /
• v.27 no.2
• /
• pp.29-46
• /
• 2020

In this study, changes in the fluvial landforms of the Yeoju section of the Han River, which was made up of the Han River Restoration Project, were examined through existing previous research data, government's environmental impact assessment data, satellite images, and field observations. For example, In the vicinity of Dori Island, the most upstream part of the study section, the location of the confluence of the Han River and Cheongmi Stream was changed, and it was found that a significant portion of the sand sedimentary layer disappeared. In the Bawuinupgubi area, the wetland, which is the first class in the ecological nature, was greatly modified, and the elevation of the ground rose as Gangcheon island and it was completely separated from the river by dredging The confluence of Geumdangcheon and the point bar of Yeonyang-ri in the south were also dredged, turned into an artificial waterfront park, and a chute channel remained in the form of a wetland was also developed as a recreational park. The deposional forms around Baekseok-ri islands also disappeared as dredging was carried out. Among the areas adjacent to the confluence of Bokcheon and Yangchon-ri Island, some sedimentay forms remains, but the abandonned channel between Yangchon-ri and the northern river bank has been changed into a riverside reservoir through dredging and embankment construction, and the waterway of the tributary river(Yazoo) has been greatly changed.

• The Journal of the Korea Contents Association
• /
• v.10 no.11
• /
• pp.452-460
• /
• 2010

This study carried out stability evaluation for design flood stage of vegetation models with river sites using 1D HEC-RAS and 2D RMA-2 numerical models. The vegetation models established in this study were divided into which channel reaches consist of urban, rural and mountain rivers with the social and cultural significance of the sites. Examination results from the numerical models showed a similar aspect with the design flood stage of these rivers before vegetation modeling. Also, no embankment overflow was shown from the urban river with additional vegetation density of 25%, although there were approximately 0.20m rising in the flood stage. In case of ural and mountain rivers, vegetation models showed scarce rising in flood stage.

• Water Engineering Research
• /
• v.3 no.1
• /
• pp.45-55
• /
• 2002

The Szentgotthard Flood Protection Project is located in the southeasters part of Austria, very close to the Hungarian border and to the Hungarian town of Szentgotthard situated near the Junction of the rivers Lafnitz and Raab. During heavy rainstorms, this area has always been liable to severe floodings, affecting the town itself and upstream reaches, where major industrial and commercial development is planned. In order to solve these problems, several solutions have been developed by means of a series of model tests performed at the hydraulic laboratory of the Technical University of Graz, Austria. The model was constructed to scales 1:75 (lengths) and 1:25 (heights). This trebled scale allowed greater accuracy in the measurement of discharge depths. The results from the model tests have led to the following proposals: - Construction of a flood relief trough with an inflow section 3.5 km upstream of the junction of the rivers Lafnitz and Raab. - Use of a former river bed for the flood relief trough. - Design of a lowered embankment crest section to pass one-third of the maximum flood flow of the river Lafnitz. - Connection of the flood relief trough to the Lahnbach stream, a tributary of the river Raab.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.215-219
• /
• 2010

The evaluation of the mechanical properties and behavior is very important for the design of embankment using granular materials. In this research, the lab. tests with Nak-dong river sand were conducted to find out mechanical properties related to stress-strain behavior. Also, numerical simulations which can express the behavior of granular material were conducted by distinct element method. Distinct element method can play a import role to predict stress-strain behavior for different confining stress and loading condition if micro-parameters can be estimated in specific condition.