• Journal of Environmental Impact Assessment
• /
• v.31 no.5
• /
• pp.286-295
• /
• 2022

In this study, the concentration distribution of indoor radon in Daejeon Metropolitan City was investigated and the reduction efficiency was evaluated by applying the radon reduction methods. Based on the results of the National Institute of Environmental Research, indoor radon measurements were conducted on 24 selected houses, and the average value of District A was 261 Bq/m3, far exceeding the standard, and even in the same house, indoor radon concentration was affected by measurement point and time. In the case of eight houses that applied the soil venting method to reduce radon, the indoorradon level was significantly lowerthan the standard value, and the average reduction efficiency was also around 55%, indicating a good reduction effect. In addition, the average reduction efficiency was around 90% in the two houses that carried out the shielding method, showing the very excellent effect of the indoorradon reduction. Even if the same reduction method is applied when reducing radon, the reduction efficiency may vary depending on various factors such as the structure of the building, the frequency of ventilation, and the season, so it is necessary to accurately evaluate the effectiveness of the reduction method in the future. Based on this, it is necessary to establish indoor radon management measures in Daejeon Metropolitan City to reduce human harm caused by radon exposure.

• Analytical Science and Technology
• /
• v.36 no.3
• /
• pp.105-112
• /
• 2023

Lycopene, a carotenoid hydrocarbon is known to have effects on reducing cardiovascular risk factors, blood lipids, and blood pressure. Thus, a lot of supplementary foods with lycopene in several dosage forms like soft capsule filled with liquid and hard capsule filled with powder are available in a market. Recently, however, our research group found that the lycopene assay in Supplementary Food Code of South Korea is only valid for oily lycopene preparation. Thus, here, we developed a simple method to determine lycopene in solid preparations for Supplementary Food Code of South Korea using saponification and liquid chromatography with an absorbance detector. The method was validated following Ministry of Food and Drug Safety guidelines. All validation parameters observed in this study were within acceptable criteria of the guidelines (selectivity, linearity of r² ≥ 0.991, lower limit of quantification of 0.0149 mg/mL, accuracy as recovery (R) between 92.70 and 97.18 %, repeatability as relative standard deviation (RSD) values of R between 0.85 and 1.59 %, and reproducibility as the RSD value of interlaboratory R of 3.70 %). Additionally, the practical sample applicability of the validated method was confirmed by accuracy between 98.81 and 101.59 % observed from its lycopene certified reference material (CRM) analyses. Therefore, the present method could contribute to fortify the supplementary food safety management system in South Korea.

• Journal of the Korean Society of Radiology
• /
• v.84 no.3
• /
• pp.705-712
• /
• 2023

Common femoral artery pseudoaneurysm is a potentially serious complication of peripheral angiography. There have been few prior reports of simultaneous pseudoaneurysm in both common femoral arteries after percutaneous access. Here we report the case of a 58-year-old male patient who presented with phlegmon or abscess a few days after bilateral femoral access, after which newly developed bilateral femoral pseudoaneurysm with wide neck was observed on CT angiography 2 months after infection treatment. Because the patient refused surgery for pseudoaneurysm, a stent-graft was inserted in the left side, and percutaneous thrombin injection under US guidance with balloon occlusion was performed for the right side. Most pseudoaneurysms occur immediately after the causative procedure. However, there have been some cases in which pseudoaneurysms may occur several weeks or months later; it is therefore necessary to check the risk factors and to carefully observe the hemostasis site.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.26 no.5
• /
• pp.519-532
• /
• 2024

Anomaly detection for the penetration rate of tunnel boring machines (TBMs) is crucial for effective risk management in TBM tunnel projects. However, previous machine learning models for predicting the penetration rate have struggled with imbalanced data between normal and abnormal penetration rates. This study aims to enhance the performance of machine learning-based anomaly detection for the penetration rate by utilizing a data augmentation technique to address this data imbalance. Initially, six input features were selected through correlation analysis. The lowest and highest 10% of the penetration rates were designated as abnormal classes, while the remaining penetration rates were categorized as a normal class. Two prediction models were developed, each trained on an original training set and an oversampled training set constructed using SMOTE (synthetic minority oversampling technique): an XGB (extreme gradient boosting) model and an XGB-SMOTE model. The prediction results showed that the XGB model performed poorly for the abnormal classes, despite performing well for the normal class. In contrast, the XGB-SMOTE model consistently exhibited superior performance across all classes. These findings can be attributed to the data augmentation for the abnormal penetration rates using SMOTE, which enhances the model's ability to learn patterns between geological and operational factors that contribute to abnormal penetration rates. Consequently, this study demonstrates the effectiveness of employing data augmentation to manage imbalanced data in anomaly detection for TBM penetration rates.

• Tuberculosis and Respiratory Diseases
• /
• v.61 no.3
• /
• pp.233-238
• /
• 2006

Study objectives: To determine the factors associated with mortality after an in-hospital diagnosis of tuberculosis in a region with low levels of HIV coinfection. Methods: From January 2003 to December 2004, all subjects who were > 15 years of age and had received a diagnosis of tuberculosis were registered. The clinical, radiological and laboratory aspects of the patients who died (n=27) were compared with those of an age and gender matched control population(n=54). Logistic regression analyses were carried out, which included age, gender, hospital admission source, initial site of admission, dyspnea, general weakness and initial laboratory data. Results: The mean age of the patients was $60{\pm}16$ years and male patients outnumbered female patients. Univariate analysis identified hemoglobin, blood urea nitrogen, albumin, cholesterol, aspartate aminotransferase (AST), C-reactive protein and the risk factors for tuberculosis to be significantly associated with mortality. Among the characteristics of disease presentation and treatment, emergency department admission, intensive care unit, disease severity, general weakness and dyspnea at the time of admission were associated with mortality. Multiple regression analysis revealed the initial management in the intensive care unit and lower serum albumin to be independently associated with mortality. Conclusion: The markers of disease chronicity and severity appear to be associated with in-hospital mortality. Identifying potentially reversible factors such as malnutrition and respiratory failure suggests specific intervention that might lead to an improvement in the patients' outcomes.

• Korean Journal of Psychosomatic Medicine
• /
• v.12 no.1
• /
• pp.15-22
• /
• 2004

Objectives: Delirium after head trauma results in various cognitive and behavioral dysfunction. This study aimed at developing and validating a predicitive model for clinical improvement after delirium based on precipitating factors during hospitalization Method: Data were collected on 45 patients who developed delirium after head trauma using 5 year retrospective design, based on reviews of medical charts including psychiatric consultation reports. The differences of the group who sustained residual symptoms of delirium(The RS group) and the group of full recovery(The FR group) at 4 week follow-up visits were compared by motoric type of delirium, socio-demographic variables, neuroimaging variables and clinical variables of interest. Result: There was significant difference in reason for initial consultation between two groups, in terms of hyperactivity(p<.01). The presence of compensation claim, subcortical gray matter lesion was significantly associated with the RS group(p<.05). Total length of intensive care unit(ICU) admission and of hospital stay were significantly longer in RS group than FR group(p<.01). Conclusion: This study shows that hyperactivity on initial consultation, compensation claims, specific brain lesion were altogether significant factors in explaining prolonged duration of delirium after head trauma. A simple predictive model based on the presence of precipitating factors might be used to identify delirious patients at high risk for prolonged cognitive dysfunction. Early psychiatric intervention would be required for evaluating efficacious management and shortening admission period.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.11
• /
• pp.1551-1558
• /
• 2009

The management of skeletal health in the twenties is the number one priority for preventing fracture or osteoporosis occurrence in later life cycle. Therefore, the factors influencing bone mineral density were examined by anthropometric measurements, food intakes, bone mineral density and biochemical nutritional indexes in blood among college students. Among the students who received health examinations from May to December, 2007, 532 male and 507 female students who agreed to participate in the study were selected. Nutritional intakes were estimated with 3-day 24-hour recall method. Bone mineral density was measured by ultrasonic attenuation passing through right calcaneus bone and expressed as broadband ultrasound attenuation and t-score was calculated by WHO criteria. Red blood cell count, hemoglobin, hematocrit values were measured by whole blood analysis, and alkaline phosphatase, serum calcium and serum iron were used as indexes for biochemical nutritional status. Data analysis was conducted using SPSS 14.0 program, and protecting and risk factors on bone health status were analyzed by logistic regression analysis between normal bone health group (t-score$\underline{\geq}$ -1.0) and osteopenia group (t-score<-1.0). The results showed that more people belong to the normal bone health group probably because this study was conducted among those with their peak bone density. Biochemical nutritional status and nutrition intakes of both groups for normal and osteopenia did not show statistically significant difference except MCHC, animal protein and animal iron intakes in female. According to the results of logistic regression analyses, dietary intakes of animal protein, animal iron and zinc showed protecting effects against osteopenia. Therefore, dietary nutritional intakes of micronutrients, especially iron and zinc are important for bone health of young people.

• Management & Information Systems Review
• /
• v.38 no.1
• /
• pp.23-41
• /
• 2019

Smart Factory is different from existing factory automation in that it aims to produce personalized products with minimum time and cost through ICT. However, previous researches, not from consumers but from product suppliers, have focused on technology trends and technology application methods. In order for Smart Factory to be successful, it must go beyond supplier-focus to meet the needs of consumers. In this study, we surveyed the purchase intention of the personalized product manufactured by smart factory. Influencing factors of purchase intention were drawn as consumers' need for uniqueness, innovativeness, need for touch, and privacy concern, based on previous research. As results of data analysis, it was confirmed that respondents were willing to purchase personalized products, and that consumers' need for uniqueness, innovativeness, and need for touch had a significant impact on purchase intention of personalized products. Our findings can be summarized as follows. First, Consumers' need for uniqueness was found to have positive effects(${\beta}=0.168$) on purchase intention of personalized products. The desire to differentiate themselves from others will be reflected in their personalized products. Therefore, consumers with a higher desire for uniqueness tend to be more willing to purchase personalized products. Second, consumer innovativeness was found to have positive effects(${\beta}=0.233$) on purchase intention of personalized products. Personalized shoes suggested in this study is a new type of personalized product that is manufactured by the latest information and communication technologies such as multi-function robots and 3D printing. Therefore, consumers seeking innovative new experiences are more willing to purchase personalized products. Third, need for touch was found to have positive effects(${\beta}=0.299$) on purchase intention of personalized products. In a smart factory environment, prosuming participation is given to consumers. If consumers participate in the product development process and reflect their requirements on the product, they are expected to increase their purchase intention by virtually satisfying the need for touch. Fourth, privacy concern was found to have no significantly related to purchase intention of personalized products. This is interpreted as a willingness to tolerate the risk of exposing personal information such as home address, telephone number, body size, and preference for consumers who feel highly useful in personalized products.

• Information Systems Review
• /
• v.17 no.2
• /
• pp.77-100
• /
• 2015

This study examined the factors that influence the smartphone user's decision to accept the personalized mobile advertisement. As a theoretical basis, we applied the privacy calculus model (PCM) that illustrates how consumers are engaged in a dynamic adjustment process in which privacy risks are weighted against benefits of information disclosure. In particular, we investigated how smartphone users make a risk-benefit assessment under which personalized service as benefit-side factor and information privacy risks as a risk-side factor accompanying their acceptance of advertisements. Further, we extend the current PCM by considering advertisement fatigue as a new factor that may influence the user's acceptance. The research model with five (5) hypotheses was tested using data gathered from 215 respondents through a quasi-experimental survey method. During the survey, each participant was asked to navigate the website where the experimental simulation of a mobile advertisement service was provided. The results showed that three (3) out of five (5) hypotheses were supported. First, we found that the intention to accept advertisements is positively and significantly influenced by the perceived value of personalization. Second, perceived advertisement fatigue was also found to be a strong predictor of the intention to accept advertisements. However, we did not find any evidence of direct influence of privacy risks. Finally, we found that the significant moderating effect between the perceived value of personalization and advertisement fatigue. This suggests that the firms should provide effective tailored advertisement that can increase the perceived value of personalization to mitigate the negative impacts of advertisement fatigue.

• Land and Housing Review
• /
• v.8 no.1
• /
• pp.1-11
• /
• 2017

The government has been constructing and supplying public rental housing to ordinary people in order to stabilize housing since 1989. However, the public rental houses initially supplied to ordinary people are at high risk for safety accidents due to the deterioration of the facilities. Therefore, this study is aimed to propose a solution to solve the life safety hazards of the old rental housing complex as a follow-up study of Analysis of Accident Patterns and Hazard Factor for Life Safety in Rental Housing Complex. Types of life safety accidents that occur in public rental housing complexes are sliding, falling, crash, falling objects, breakage, fire accidents, traffic accidents and criminal accidents. The types of safety accidents that occur in rental housing complexes analyzed in this study are sliding, crashes, falling objects, and fire accidents. Although the incidence of safety accidents such as falling, breakage, traffic accidents and crime accidents in public rental housing complexes is low, these types are likely to cause safety accidents. The method of this study utilized interviews and seminar results, and it suggested ways to solve the life safety hazards in rental housing complexes. Interviews were conducted with residents and managers of rental housing complexes. Seminars were conducted twice with experts in construction, maintenance, asset management, housing welfare and safety. Through interviews and seminars, this study categorizes the life safety hazards that occur in rental housing complexes by types of accidents and suggests ways to resolve them as follows. (1) sliding ; use of flooring materials with high friction coefficient, installation of safety devices such as safety handles, implementation of maintenance, safety inspections and safety education, etc. (2) falling ; supplementation of safety facilities, Improvement of the design method of the falling parts, Safety education, etc. (3) crash ; increase the effective width of the elevator door, increase the effective width of the lamp, improve the lamp type (U type ${\rightarrow}$ I type), etc. (4) falling objects and breakage ; design of furniture considering the usability of residents, replacement of old facilities, enhancement of safety consciousness of residents, safety education, etc. (5) fire accidents ; installation of fire safety equipment, improvement by emergency evacuation, safety inspection and safety education, etc. (6) traffic accidents ; securing parking spaces, installing safety facilities, conducting safety education, etc. (7) criminal accidents; improvement of CCTV pixels, installation of street lights, removal of blind spots in the complex, securing of security, etc. The roles of suppliers, administrators and users of public rental housing proposed in this study are summarized as follows. Suppliers of rental housing should take into consideration the risk factors that may arise not only in the design and construction but also in the maintenance phase and should consider the possibility of easily repairing old facilities considering the life cycle of rental housing. Next, Administrators of rental housing should consider the safety of the users of the rental housing, conduct safety checks from time to time, and immediately remove any hazardous elements within the apartment complex. Finally, the users of the rental housing needs to form a sense of ownership of all the facilities in the rental housing complex, and efforts should be made not to cause safety accidents caused by the user's carelessness. The results of this study can provide the necessary information to enable residents of rental housing complexes to live a safe and comfortable residential life. It is also expected that this information will be used to reduce the incidence of safety accidents in rental housing complexes.