• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.468-469
• /
• 2010

DSTATCOM(Distribution STATic COMpensator) is one of the custom power devices, and protects a distribution line from unbalanced and harmonic current caused by non-linear and unbalanced loads. Conventional researches use a LPF(Low Pass Filter) to eliminate ripple component at the calculation of compensation current. This paper proposes a calculation of compensation current using phase shift that can be a counterproposal of conventional methods using LPF.

• 전기전자학회논문지
• /
• 제24권4호
• /
• pp.1104-1108
• /
• 2020

본 논문에서는 3상 영구자석 동기전동기의 속도리플 저감을 위한 가변형 비례공진 전향보상 알고리즘을 제안한다. 일반적인 토크 맥동의 원인은 전류측정오차 및 데드타임으로 인한 전기적 맥동과 회전자 편심과 편심 부하로 인해 발생될 수 있다. 이러한 토크 맥동은 전동기의 속도 맥동을 야기하고 전동기 구동 시스템의 운전 성능을 저하시킬 수 있다. 이를 위한 본 논문에서는 속도 맥동의 원인을 분석하고 속도 맥동을 저감하기 위한 알고리즘을 제안하였다. 제안한 알고리즘은 속도 맥동에 포함된 특정 운전 주파수를 저감하기 위해 가변형 비례 공진 제어기를 적용하였고, 전향보상 제어기 구조를 이용하여 보상동작이 수행되도록 하였다. 제안한 알고리즘은 다양한 실험을 통하여 타당성과 효용성을 검증하였다.

• 전력전자학회논문지
• /
• 제4권4호
• /
• pp.318-324
• /
• 1999

본 논문에서는 영구자석형 선형 동기전동기의 제어특성을 개선시키기 위하여 유한요소 해석에 근거한 제어기법을 제시하였다. 제시한 제어기법에서는 이동자의 위치에 따라 통상의 제어기법에서의 전류분에 추가적인 보상분 전류가 추가되게 된다. 이동자의 위치 및 인가전류에 따른 영구자석형 선형 동기전동기의 추력리플 특성이 유한요소법을 이용하여 해석되었으며, 그 결과를 토대로하여 제어시의 코깅력에 의한 추력 리플을 보상하기 위한 전류값이 계산되었다. 속도제어시 종래의 제어법과 제시된 제어법에 따른 응답특성을 살펴 보았으며, 제시된 방법의 타당성을 검증하기 위하여 시험기를 제작, 실험하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.73-77
• /
• 2002

The requirements for higher productivity call for high speed of the machine tool axes. Iron core type linear DC motor is growly accepted far a viable candidate of the high speed machine tool feed unit. LDM, however, has inherent disturbance force components: cogging and force ripple. These disturbance force directly affects tracking accuracy of the carrage and must be eliminated or reduced. Reducing motor ripple, this paper adapted the feed forward compensation method and neural network control. Experiments carried 7ut on the linear motor test setup show that this control methods is usable in order to reduce the motor ripple.

• 전력전자학회논문지
• /
• 제22권5호
• /
• pp.449-456
• /
• 2017

This study proposes a method for compensating for the commutation torque ripple of delta-connected brushless DC motors with low inductance based on a current predictions. At the commutation instant, a phase current at the next sampling period is predicted and compared with the reference phase current to determine whether torque ripples will occur or not. If the predicted current cannot reach the reference phase current, the reference current is modified and the relevant voltage reference is produced to reduce the torque ripple. The validity of the proposed method has been verified by simulation and experimental results. The commutation torque ripple has been decreased by 17.7% at 1,000 rpm and 80% load conditions.

• 전기학회논문지
• /
• 제67권9호
• /
• pp.1165-1173
• /
• 2018

Recently, owing to environmental problems and instability of rare earth resources market, non-rare earth electric motors are attracting attention. As a non-rare earth motor type, a wound rotor synchronous motor(WRSM) has high power density and wide driving range further it can reduce loss by field current control during field weakening control at high speed. However, since the d-axis flux of the WRSM is coupled with the rotor circuit, the fluctuation in the d-axis flux linkage affects the rotor circuit, which causes ripple of the field current and torque. In this paper, we propose the field current ripple compensation method by injecting the feedforward voltage. the proposed compensating method was demonstrated by simulation and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1616-1618
• /
• 2005

In this paper, A fuzzy logic based turn-off angle compensator for torque ripple reduction in a linear switched reluctance motor is proposed. The turn-off angle, as a complex function of motor speed and current, is automatically changed for a wide speed range to reduce torque ripple. Simulation results are presented that show ripple reduction when the him-off angle compensator is used.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1062-1069
• /
• 2013

This paper proposes a simple current compensation method to improve the control performance of B4 inverters. Four-switch inverters so called B4 inverters employ only four switches. They have a split dc-link and one phase of three-phase motors is connected to the center-tap of split dc-link capacitors in B4 inverters. The voltage ripples in the center tap of the dc-link generate unbalanced three-phase voltages causing current ripples. To solve this problem, this paper presents a simple compensation method that adjusts switching times considering dc-link voltage ripples. The validity of the proposed method is verified by simulations and experiments carried out with a 1 HP induction machine.

• 전력전자학회논문지
• /
• 제17권1호
• /
• pp.8-13
• /
• 2012

DSTATCOM is active filter that reduces nonlinear and unbalanced currents. Researches about DSTATCOM are mainly divided two parts, one is the reference value calculation of compensation current depending on the calculation of the load-side average active power and dc-link capacitor average voltage, the other part is actual current control depending on the reference value of compensation current. This paper proposes a calculation of dc-link capacitor average voltage ripple voltage extraction instead of conventional method using LPF. The utility of the proposed algorithm is verified through the theoretical analysis and the experiment under unbalance loads and non-linear load.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.443-444
• /
• 2014

Using the ESS(Energy Storage System) as a UPS(Uninterruptible Power Supply) is being studied recently. When the system is operating at UPS mode in integrated ESS and UPS system, the grid supplying power is disconnected and power from PV generation and battery are supplying to load. Operating in UPS mode, when PV generation power is diminished by partial or total clouded situation, DC-link voltage fluctuates. The fluctuation of DC-link voltage influences the load and system as sensitive loads may malfunction. This paper suggests the DC-link ripple voltage compensation algorithm in bi-directional converter. The algorithm stabilize the DC-link and load voltage.