• Title/Summary/Keyword: Ripening temperature

Search Result 294, Processing Time 0.03 seconds

Investigation of the Ptimum Transplanting Date for Floury Endosperm Rice to Reduce the Viviparity Rate (쌀가루 가공용 벼 품종의 수발아 발생 감소를 위한 적합 이앙시기 설정)

  • Hwang, Woon-Ha;Choi, Meong-Gue;Jeong, Jae-Hyeok;Lee, Hyen-Seok;Yang, Seo-Yeong;Lee, Chung-gun
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.66 no.4
    • /
    • pp.289-296
    • /
    • 2021
  • This study aimed to analyze the optimal transplanting date of the floury endosperm rice varieties Hangaru, Seolgeang, Singil, and Baromi2 allowing to reduce the viviparity rate. The viviparity rate rapidly increased with the mean temperature during the ripening stage. Therefore, to reduce the viviparity rate, we calculated the optimum heading date based on the safe heading date limit in each area so that the ripening stage occurred at lower temperatures. hen, the effects of changes in heading date were monitored by recording the transplanting date and the temperature during the growth period. The transplanting date was highly correlated with the number of heading days in the field. Therefore, the optimum transplanting date was calculated according to the transplanting date in each area. When the accumulated temperature was 700℃, if floury rice was transplanted at the optimum transplanting date, the mean temperature was approximately 20℃. When the accumulated temperature was 900℃, the mean temperature was approximately 18℃. Under these conditions, the viviparity rates of Hangaru, Seolgeang, and Singil rice were lower than 10%. However, Baromi2 showed a high viviparity rate. These results suggest that the viviparity rate of Hangaru, Seolgeang, and Singil rice can be reduced by transplanting at the optimum transplanting date. However, further research is required for pinpointing the optimum transplanting date of Baromi2 rice.

Implications of Temperature and Humidity on Pupation Patterns in the Silkworm, Bombyx mori L.

  • Lakshminarayana, P.;Naik, S.Sankar;Reddy, N.Sivarami
    • International Journal of Industrial Entomology and Biomaterials
    • /
    • v.5 no.1
    • /
    • pp.67-71
    • /
    • 2002
  • The implications of temperature (25,30 and 35$^{\circ}C$) and relative humidity (60, 70 and 80%) on the pupation patterns were studied in the silkworm, Bombyx mori L. Larvae of two pure silkworm breeds, Pure Mysore (PM) and NB4D2 and their hybrid, PM ${\times}4 NB4D2 were reared under experimental conditions under natural day photoperiodic (LD 12: 12) condition. The three developmental marker events viz., larval ripening, pharate pupal formation and pupal formation occurred at or around the beginning of the photo-phase. The computed of mean vector (equation omitted), based on the circular statistics, also confirmed the above. However, the length of mean vector, r and the mean vector angular variance, s varied according to temperature and humidity conditions imposed; the variations being non-significant. Extreme temperature and humidity conditions, however, resulted in reduction in pupation rate (%) for PM and PM ${\times}4 NB4D2. On the other hand, in NB4D2 pupation percentage reduced below the economic level. The temperature and humidity together seems to exert synergic impact on the pupation rate at least in the silkworm Bombyx mori, L.

Application of Stable o/w Nanoemulsions with Skin Depigmenting Agent for Integration Type of Cosmetics (피부 미백제를 함유한 안정한 o/w 나노에멀젼의 융복합형 화장품 이용)

  • Cho, Wan-Goo
    • Journal of Digital Convergence
    • /
    • v.13 no.4
    • /
    • pp.417-423
    • /
    • 2015
  • Oil-in-water(o/w) nanoemulsions were prepared in the system of water/Span 80-Tween 80/long-chain paraffin oil via PIC method. With the increase of preparation temperature from 30 oC to 80 oC, the diameter of emulsion droplets decreased from 150 nm to 40 nm. By varying the HLB of mixed surfactants, we found that there was an optimum HLB around 13.0~14.0 corresponding to the minimum droplet size. The size of emulsion droplets increased upon increasing the ratio of oil/emulsifying agent. At $f{\leq}0.15$, the size of nanoemulsions could be kept constant more than 2 months. The increase in preparation temperature makes it possible for producing monodisperse nanoemulsions. Once the nanoemulsion is produced, the stability against Ostwald ripening is outstanding due to the extremely low solubility of the liquid paraffin oil in the continuous phase.

Preparation and Characterization of Porous and Composite Nanoparticulate Films of CdS at the Air/Water Interface

  • Ji, Guanglei;Chen, Kuang-Cai;Yang, Yan-Gang;Xin, Guoqing;Lee, Yong-Ill;Liu, Hong-Guo
    • Bulletin of the Korean Chemical Society
    • /
    • v.31 no.9
    • /
    • pp.2547-2552
    • /
    • 2010
  • CdS nano-particulate films were prepared at the air/water interface under Langmuir monolayers of arachidic acid (AA) via interfacial reaction between $Cd^{2+}$ ions in the subphase and $H_2S$ molecules in the gaseous phase. The films were made up of fine CdS nanoparticles with hexagonal Wurtzite crystal structure after reaction. It was revealed that the formation of CdS nano-particulate films depends largely on the experimental conditions. When the films were ripened at room temperature or an increased temperature ($60^{\circ}C$) for one day, numerous holes were appeared due to the dissolution of smaller nanoparticles and the growth of bigger nanoparticles with an improved crystallinity. When the films were ripened further, CdS rodlike nanoparticles with cubic zinc blende crystal structure appeared due to the re-nucleation and growth of CdS nanoparticles at the stacking faults and defect structures of the hexagonal CdS grains. These structures were characterized by transmission electron microscopy (TEM), high-resolution TEM (HRTEM), and X-ray diffraction (XRD). These results declare that CdS semiconductor nanoparticles formed at the air/water interface change their morphologies and crystal structures during the ripening process due to dissolution and recrystallization of the particles.

Accelerated testing for evaluating bubble quality within quartz glass crucibles used for manufacturing silicon single crystal ingots (실리콘 단결정 잉곳 제조용 석영유리 도가니 내 기포 품질평가를 위한 가속시험)

  • Gyu Bin Lee;Seung Min Kang;Jae Ho Choi;Young Min Byeon;Hyeong-Jun Kim
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.33 no.3
    • /
    • pp.91-96
    • /
    • 2023
  • To verify the quality of bubbles during the use of quartz glass crucibles (QC), an appropriate accelerated testing method was proposed. The bubble state of discarded waste crucibles obtained from actual Czochralski (Cz) processes was analyzed, and optimal heat treatment conditions were suggested by varying temperature, pressure, and time using the QC test piece. By subjecting the samples to heat treatment at 1450℃, 0.4 Torr, and 40 hours, it was possible to control the bubble size and density to a similar level as those generated in the actual Cz process. In particular, by selecting a relatively lower pressure of 0.4 Torr compared to the typical range of 10~20 Torr applied in the Cz process, the time required for accelerated bubble formation testing could be reduced. However, it was determined that increasing the heat treatment temperature to 1550℃ led to the phenomenon of Ostwald ripening, resulting in larger bubbles and a rapid decrease in density. Therefore, it was concluded that it was not a suitable condition for the desired b ake test.

Studies on Preparation of a Cheese-like product from Soybean Milk (콩을 이용한 치-즈제조에 관한 연구)

  • Kim, Chang-Sik;Shin, Hyo-Sun
    • Korean Journal of Food Science and Technology
    • /
    • v.3 no.1
    • /
    • pp.57-63
    • /
    • 1971
  • 1) Among five lactic acid bacteria examined, Str. thermophilus and Str. diacetilactis produced remarkably greater amount of acids in soybean milk than Str. lactis, Str. cremoris and L. bulgaricus. 2) Soybean milk and skimmed dry milk were combined in the ratio of 7 : 3 and were carried out in lactic acid fermentation for 24 hours at optimum temperature. The result indicated that the yield of precipitation and protein content of it were the most, the moisture content was the least and curd structure formed was considered too hard. 3) Based on these and other results, following procedure was used for manufacturing: soybean milk and skimmed dry milk were combined in the ratio of 7 : 3, heated at $121^{\circ}C$ for 20 min., cooled, added Str. thermophilus as lactic acid starter and incubated for 24 hours and $37{\pm}1^{\circ}C$. The curd was cooked, hooped, and pressed for 24 hours, to the surface of which, Penicillium caseicolum and sodium chloride were spread. During ripening of the curd at $15^{\circ}C$ and $85{\sim}90%$ RH for 21 days, Pen. caseicolum was highly developed after 7 days, pH was increased and proteolytie activity has reached to the peak point after 14 days. After 7 days of ripening total water soluble nitrogen, water soluble protein nitrogen and amino acids nitrogen were begun to increase. After 21 days of ripening total water soluble nitrogen, water soluble protein nitrogen and amino-N reached to 52%, 32% and 14% of total nitogen. In the soybean cheese, after 21 days of ripening, 17 or more kinds of amino acids were detected by two-dimentional paper chromatography. The product contained 63.2% of moisture, 17.5% of crude protein, 13.2% of crude fat, 2.8% of crude ash and 2.5% of sodium chloride.

  • PDF

Studies on the characteristics of recommended soybean varieties in Korea 1. on the days from planting to blooming and from blooming to ripening: (한국의 대두장려품종의 특성에 관한 연구 1. 개화일수와 결실일수)

  • Mun-Hue Heu
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.1 no.1
    • /
    • pp.36-41
    • /
    • 1963
  • 10 of Korean domestic recommended varieties(all of them are determinate type) and 10 of introduced varieties from U.S.A.(All of them are indeterminate type) are grown in replicated field in order to clarify the varietal differences in the days from planting to blooming to ripening. The results are summarized as follows; 1. Domestic varieties showed remarkable shortday sensibility for the days from planting to blooming. The difference in sensibility between domestic and introduced was significant while within the domestic group the differences were not significant. 2. The days from planting to blooming were linearly shortened in accordance with the delayed planting from the late April through the late June. 3. Annual variation in days from planting to blooming was not noticeable in the domestic varieties while the introduced ones showed remarkably. 4. The days from blooming to ripening were significantly shortened for the introduced varieties but not significantly for the domestic varieties accordingly with the delayed planting. The mean shortest days of domestic varieties were longer than the mean shortest days of introduced varieties. 5. The days from planting to blooming was shortest when a variety was grown during early August through middle September (with 12.5~13.5 hrs day length and 22~$27^{\circ}C$ temperature), and the days from blooming to ripening were also shortest when a variety was matured within same duration. These were true for the varieties of both groups.

  • PDF

Studies on the Varietal Difference in the Physiology of Ripening in Rice with Special Reference to Raising the Percentage of Ripened Grains (수도 등숙의 품종간차이와 그 향상에 관한 연구)

  • Su-Bong Ahn
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.14
    • /
    • pp.1-40
    • /
    • 1973
  • There is a general tendency to increase nitrogen level in rice production to insure an increased yield. On the other hand, percentage of ripened grains is getting decreased with such an increased fertilizer level. Decreasing of the percentage is one of the important yield limiting factors. Especially the newly developed rice variety, 'Tongil' is characterized by a relatively low percentage of ripened grains as compared with the other leading varieties. Therefore, these studies were aimed to finding out of some measures for the improvement of ripening in rice. The studies had been carried out in the field and in the phytotron during the period of three years from 1970 to 1972 at the Crop Experiment Station in Suwon. The results obtained from the experiments could be summarized as follows: 1. The spikelet of Tongil was longer in length, more narrow in width, thinner in thickness, smaller in the volume of grains and lighter in grain weight than those of Jinheung. The specific gravity of grain was closely correlated with grain weight and the relationship with thickness, width and length was getting smaller in Jinheung. On the other hand, Tongil showed a different pattern from Jinheung. The relationship of the specific gravity with grain weight was the greatest and followed by that with the width, thickness and length, in order. 2. The distribution of grain weight selected by specific gravity was different from one variety to another. Most of grains of Jinheung were distributed over the specific gravity of 1.12 with its peak at 1.18, but many of grains of Tongil were distributed below 1.12 with its peak at 1.16. The brown/rough rice ratio was sharply declined below the specific gravity of 1.06 in Jinheung, but that of Tongil was not declined from the 1.20 to the 0.96. Accordingly, it seemed to be unfair to make the specific gravity criterion for ripened grains at 1.06 in the Tongil variety. 3. The increasing tendency of grain weight after flowering was different depending on varieties. Generally speaking, rice varieties originated from cold area showed a slow grain weight increase while Tongil was rapid except at lower temperature in late ripening stage. 4. In the late-tillered culms or weak culms, the number of spikelets was small and the percentage of ripened grains was low. Tongil produced more late-tillered culms and had a longer flowering duration especially at lower temperature, resulting in a lower percentage of ripened grains. 5. The leaf blade of Tongil was short, broad and errect, having light receiving status for photosynthesis was better. The photosynthetic activity of Tongil per unit leaf area was higher than that of Jinheung at higher temperature, but lower at lower temperature. 6. Tongil was highly resistant to lodging because of short culm length, and thick lower-internodes. Before flowering, Tongil had a relatively higher amount of sugars, phosphate, silicate, calcium, manganese and magnesium. 7. The number of spikelets of Tongil was much more than that of Jinheung. The negative correlation was observed between the number of spikelets and percentage of ripened grains in Jinheung, but no correlation was found in Tongil grown at higher temperature. Therefore, grain yield was increased with increased number of spikelets in Tongil. Anthesis was not occurred below 21$^{\circ}C$ in Tongil, so sterile spikelets were increased at lower temperature during flowering stage. 8. The root distribution of Jinheung was deeper than that of Tongil. The root activity of Tongil evaluated by $\alpha$-naphthylamine oxidation method, was higher than that of Jinheung at higher temperature, but lower at lower temperature. It is seemed to be related with discoloration of leaf blades. 9. Tongil had a better light receiving status for photosynthesis and a better productive structure with balance between photosynthesis and respiration, so it is seemed that tongil has more ideal plant type for getting of a higher grain yield as compared with Jinheung. 10. Solar radiation during the 10 days before to 30 days after flowering seemed enough for ripening in suwon, but the air temperature dropped down below 22$^{\circ}C$ beyond August 25. Therefore, it was believed that air temperature is one of ripening limiting factors in this case. 11. The optimum temperature for ripening in Jinheung was relatively lower than that of Tongil requriing more than $25^{\circ}C$. Air temperature below 21$^{\circ}C$ was one of limiting factors for ripening in Tongil. 12. It seemed that Jinheung has relatively high photosensitivity and moderate thermosensitivity, while Tongil has a low photosensitivity, high thermosensitivity and longer basic vegetative phase. 13. Under a condition of higher nitrogen application at late growing stage, the grain yield of Jinheung was increased with improvement of percentage of ripened grains, while grain yield of Tongil decreased due to decreasing the number of spikelets although photosynthetic activity after flowering was. increased. 14. The grain yield of Jinheung was decreased slightly in the late transplanting culture since its photosynthetic activity was relatively high at lower temperature, but that of Tonil was decreased due to its inactive photosynthetic activity at lower temperature. The highest yield of Tongil was obtained in the early transplanting culture. 15. Tongil was adapted to a higher fertilizer and dense transplanting, and the percentage of ripened grains was improved by shortening of the flowering duration with increased number of seedlings per hill. 16. The percentage of vigorous tillers was increased with a denser transplanting and increasing in number of seedlings per hill. 17. The possibility to improve percentage of ripened grains was shown with phosphate application at lower temperature. The above mentioned results are again summarized below. The Japonica type leading varieties should be flowered before August 20 to insure a satisfactory ripening of grains. Nitrogen applied should not be more than 7.5kg/10a as the basal-dressing and the remained nitrogen should be applied at the later growing stage to increase their photosynthetic activity. The morphological and physiological characteristics of Tongil, a semi-dwarf, Indica $\times$ Japonica hybrid variety, are very different from those of other leading rice varieties, requring changes in seed selection by specific gravity method, in milling and in the cultural practices. Considering the peculiar distribution of grains selected by the method and the brown/rough rice ratio, the specific gravity criterion for seed selection should be changed from the currently employed 1.06 to about 0.96 for Tongil. In milling process, it would be advisable to bear in mind the specific traits of Tongil grain appearance. Tongil is a variety with many weak tillers and under lower temperature condition flowering is delayed. Such characteristics result in inactivation of roots and leaf blades which affects substantially lowering of the percentage of ripened grains due to increased unfertilized spikelets. In addition, Tongil is adapted well to higher nitrogen application. Therefore, it would be recommended to transplant Tongil variety earlier in season under the condition of higer nitrogen, phosphate and silicate. A dense planting-space with three vigorous seedlings per hill should be practiced in this case. In order to manifest fully the capability of Tongil, several aspects such as the varietal improvement, culural practices and milling process should be more intensively considered in the future.he future.

  • PDF

Effect of 1-Methylcyclopropene (1-MCP) Treatment on the Quality Characteristics and Pigmentation of Tomato Fruit (Lycopersicon Esculentum Mill.) (1-Methylcyclopropane 처리가 토마토 선도유지 효과 및 색소 변화에 미치는 영향)

  • Lee, Youn-Suk;Chung, Dae-Sung;Harte, Bruce R.;Shin, Joong-Min
    • Horticultural Science & Technology
    • /
    • v.28 no.4
    • /
    • pp.600-608
    • /
    • 2010
  • The quality attributes of tomato fruit ($Lycopersicon$ $Esculentum$ Mill.) to treatments with 1-methylcyclopropene (1-MCP) were studied. Harvested tomato fruit was treated one time at the initiation of storage or once-a-day during storage with $1{\mu}L/L$ 1-MCP at different storage temperatures, 12, 17, and $23^{\circ}C$. The results showed that both lower temperature and duration of 1-MCP treatment played an important role in ripening of tomato fruit. The once-a-day 1-MCP treatment was presented to be very effective in delaying quality changes of tomato fruit. The amount of chlorophyll and lycopene were measured to assess the impact of 1-MCP and temperature treatments on ripening, using a specific extinction coefficient absorbance technique. Storing tomato fruit at $12^{\circ}C$ resulted in a longer ripening period (color change) than tomato fruit stored at $17^{\circ}C$ and $23^{\circ}C$. 1-MCP treatment was very effective in retarding chlorophyll degradation and lycopene formation in the pericarp tissue of the tomato fruit at the different storage temperatures. The 1-MCP treatments affected the total chlorophyll content in different fruit tissues of the pericarp and placenta. Exposure of tomato fruit to 1-MCP gas at $12^{\circ}C$, using the once-a-day treatment, was highly effective in delaying pigment and color change.

Stable Liquid Paraffin-in-Water Nanoemulsions Prepared by Phase Inversion Composition Method (조성 상전이 방법으로 제조된 안정한 액상 파라핀-물 나노에멀젼)

  • Kim, Eun Hee;Cho, Wan Goo
    • Journal of the Society of Cosmetic Scientists of Korea
    • /
    • v.40 no.2
    • /
    • pp.133-139
    • /
    • 2014
  • Oil-in-water nanoemulsions were prepared in the system of water/Span 80-Tween 80/long-chain paraffin oil via the PIC (phase inversion composition) method. With the increase of preparation temperature from $30^{\circ}C$ to $80^{\circ}C$, the diameter of emulsion droplets decreased from 120 nm to 40 nm, proving the formation of nanoemulsions. By varying the HLB (hydrophilic lipophilic balance) of mixed surfactants, we found that there was an optimum HLB around 12.0 ~ 13.0 corresponding to the minimum droplet size. The viscosity of nanoemulsions clearly increased with droplet volume fraction, f, but the droplet size slightly increased. Significantly, at ${\phi}{\leq}0.3$, the size distribution of nanoemulsions kept constant more than 2 months. These results proved that the viscous paraffin oil can hardly be dispersed by the PIC method at $30^{\circ}C$, but the increase in preparation temperature makes it possible for producing monodisperse nanoemulsions. Once the nanoemulsion is produced, the stability against Ostwald ripening is outstanding due to the extremely low solubility of the liquid paraffin oil in the continuous phase. The highly stable nanoemulsions are of great importance in cosmetic applications.