• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.4
• /
• pp.567-574
• /
• 2006

This paper focuses on lossy medical image compression methods for medical images that operate on three-dimensional(3-D) irreversible integer wavelet transform. We offer an application of unbalanced tree structure algorithm to medical images, using a 3-D unbalanced wavelet decomposition and a 3-D unbalanced spatial dependence tree. The wavelet decomposition is accomplished with integer wavelet filters implemented with the lifting method. We have tested our encoder on volumetric medical images using different integer filters and 16 coding unit size. The coding unit sizes of 16 slices save considerable dynamic memory(RAM) and coding delay from full sequence coding units used in previous works. If we allow the formation of trees of different lengths, then we can accomodate more transaxial scales than three. Then the encoder and decoder can then keep track of the length of the tree in which each pixel resides through the sequence of decompositions. Results show that, even with these small coding units, our algorithm with I(5,3)filter performs as well and better in lossy coding than previous coding systems using 3-D integer unbalanced wavelet transforms on volumetric medical images.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.473-477
• /
• 2007

The development of advanced Insulated Gate Bipolar Transistor(IGBT)has enabled high-frequency switching operation and has improved the performance of PWM inverters for motor drive. However, the high rate of dv/dt of IGBT has adverse effects on motor insulation stress. In many motor drive applications, the inverter and motor are separated and it requires long motor feds. The long cable contributes high frequency ringing at the motor terminal and it results in hight surge voltage which stresses the motor insulation. The inverter output filter and RDC snubber are conventional method which can reduce the surge voltage. In this paper, we propose the new low loss snubber to reduce the motor terminal surge voltage. The snubber consists of the series connection of charging/discharging capacitor and the voltage-clamped capacitor. At IGBT turn-off, the snubber starts to operate when the IGBT voltage reaches the voltage-clamped level. Since dv/dt is decreased by snubber operating, the peak level of the surge voltage can be reduced. Also the snubber operates at the IGBT voltage above the voltage-clamped level, the snubber loss is largely reduced comparing with RDC snubber. The proposed snubber enables to reduce the motor terminal surge voltage with low loss.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.5 s.311
• /
• pp.1-11
• /
• 2006

This paper presents a digital auto-focusing method using a priori estimated point-spread-functions (PSF) database. The proposed algorithm efficiently removes out-of-focus blur in a degraded input image by selecting the optimal PSF from the database. The database consists of optical characteristics of image formation system. The PSF selection Process is performed based on a novel focusing measure. The proposed method includes a spatially adaptive filter for removing both noise and ringing artifacts. Experimental results show that the proposed method efficiently removes out-of-focus blur using significantly reduced computational load compared with the existing method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.18 no.2
• /
• pp.131-137
• /
• 2013

In this paper, the phase-shift full-bridge DC/DC converter with fixed-phase operation inverter is proposed. The proposed circuit consists of two full-bridge inverters which are connected in parallel. While one full-bridge inverter operates as the fixed-phase, it regulates the output voltage by adjusting the phase of the other inverter. During the normal operation period, the proposed circuit makes the less amount of conduction loss of the primary switches and secondary synchronous rectifiers, as well as the less amount of the current ripple of the output inductor, than the conventional phase-shift full-bridge DC/DC converter does. Also, it achieves high efficiency by reducing the snubber loss of the secondary synchronous rectifier. To sum up, the present inquiry analyzes the theoretical characteristics of the proposed circuit, and shows the experimental results from a prototype for 450W power supply.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.2
• /
• pp.488-493
• /
• 2006

To make a objective diagnosis of Dam Hun(痰暈), we investigated the 63 patients with Dam Hun(痰暈) and 34 normal people as control group. we compared the thermal difference between Chon-jung(CV17 ) and Chung-wan(CV12 中脘), Chon-jung(CV17 ) and Gwan-won(CV4 關元) and we compared the thermal difference of Yang-mun(ST21 梁門), Chun_chu(ST25 天樞), Su-do(ST28 水道), too. All 63 patients had dizziness and GI trouble. They had the symptom - fatigue, nausea vomitting, head heaviness, indigestion, cold limbs, headache, heart burn, constipation, diarrhea, anorexia. And some had edema, numbness, insomnia, palpitation, facial flushing, dysuria, ringing. Considering the average temparature of Chon-jung(CV17 ), Chung-wan(CV12 中脘), Gwan-won(CV4 關元), Yang-mun(ST21 梁門), Chun-chu(ST25 天樞), Su-do(ST28 水道) between the patients group and the control group, the patients group were lower than the control group except for Chon-jung(CV17 ), Gwan-won(CV4 關元), but the statistical significance was not. Considering the thermal difference of Chon-jung(CV17 ) and Chung-wan(CV12 中脘), Gwan-won(CV4 關元), Yang-mun(ST21 梁門), Chun-chu(ST25 天樞), Su-do(ST28 氷道) between the patients group and the control group, the temparature deviation of Chon-jung(CV17 ) and Chung-wan(CV12 中脘), Chon-jung(CV17 ) and Yang-mun(ST21 梁門) was significant. We suggest that coldness of upper abdomen is significant in diagnosis of Dam Hun(痰暈).

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.5-13
• /
• 2001

It is well known that there are two experimental errors on acoustic decay measurements. ,One is due to the influence of the band pass filter the other one is that of an averaging device. In this paper the influence of the filter is investigated in detail. To minimize the influence of the filter, the product of the filter bandwidth B (3dB bandwidth) and the reverberation time T/sub 60/ of the room under test should be at least 16. Moreover, if the initial part of an acoustic decay curve is important, the strong requirement, i. e. BT/sub 60/〉64, must be satisfied. In this paper, the wavelet filter bank instead of the band pass filter bank is applied to obtain an acoustic decay curve. As a result, the influence of filter is reduced and then the value of BT/sub 60/ required for obtaining an acceptable decay curve becomes at least 4. The strong requirement for the initial part of a decay curve is also replaced by the BT/sub 60/〉16 instead of BT/sub 60/〉64.

• Journal of Broadcast Engineering
• /
• v.21 no.2
• /
• pp.200-209
• /
• 2016

This paper proposes a non-uniform de-blur algorithm using IMU sensor and a long/short exposure-time image pair to efficiently remove the blur phenomenon. Conventional blur kernel estimation algorithms using sensor information do not provide acceptable performance due to limitation of sensor performance. In order to overcome such a limitation, we present a kernel refinement step based on images having different exposure times which improves accuracy of the estimated kernel. Also, in order to figure out the phenomenon that conventional non-uniform de-blur algorithms suffer from severe degradation of visual quality in case of large blur kernels, this paper a homography-based residual de-convolution which can minimize quality degradation such as ringing artifacts during de-convolution. Experimental results show that the proposed algorithm is superior to the state-of-the-art methods in terms of subjective as well as objective visual quality.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.3
• /
• pp.45-52
• /
• 2006

In this paper, we analyze on the effect of LCR filter to mitigate transient overvoltage on the high voltage induction motor fed by H-bridge cascaded 7-level inverter. The switching surge voltage that it was occurred in inverter appears transient overvoltage at the motor input terminal. the transient overvoltage becomes the major cause to occur the insulation failure by serious voltage stress in the stator winding of high voltage induction motor. The effect of transient overvoltage appears more serious in high voltage induction motor than low voltage induction motor. We selected LCR filter for reduction of the transient overvoltage. Consequently, we demonstrated that the LCR filter connected to the invertor output terminals greatly reduces the transient voltage stress and ringing. The results of simulation show the suppression of transient overvoltage at the motor end of a long cable. using EMTP

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.629-630
• /
• 2017

Recently, the number of patients with habitual vertebrae is increasing due to inappropriate postures and habits while sitting on a chair for a long time, because modern people have a great deal of work and studying due to a lot of work and study. Therefore, it is necessary to prevent such a disease through real-time monitoring and to present a guide for the user to recognize the importance of correct posture. In this study, we implemented a posture discrimination system which can help users to calibrate posture by judging the user's sitting position and feedback by using a pressure sensor based weight distribution system. We analyzed the distribution pattern of body weight to determine one normal posture and six abnormal postures. If the abnormal posture is maintained constantly, the implementation of the application that induces the right posture by ringing the notification is described.

• Proceedings of the Botanical Society of Korea Conference
• /
• 1987.07a
• /
• pp.191-211
• /
• 1987

Common usage of the concept of juvenility implies that there is one physiological phase, the juvenile phase, which manifests itself in the various morphological and physiological phenomena observed in juvenile higher plants. The juvenile phase is often defined as that time from seed germination until the plant attains the ability to flower regulating such behaviour. This definition precludes plants from flowering in the juvenile phase. It is of major interest, therefore, to identify the physiological controls(Bluehreife) regulating such behavior. The length of the juvenile period in higher plants ranges from one year to over 60 years in different species. The long juvenile period of seedling is the main cause of the long duration of the breeding process. I determined the length of the juvenile period in various plants and its control of phase changes in natural system in relation to factors such as plant size and age, shoot morphology, apex size, root system and phytohormonal and nutritional status is reviewed. From the own experimental and observational evidence available it appears that both hormonal and nutritional factors can be involved in control of juvenility but that a specific juvenile or flowering hormone is not involved. Grafting, ringing, scoring, root pruning and fertilization have been used to accelerate flowering, but in most cases these cultured treatments are only successful on plants that were passed the juvenile phase. It is suggested that there are intrinsic difference between the meristematic cells of the apieces of juvenile and adult shoot, which are thus determined with respect to there development potentialities. The problems associated with the maintenance of the determined state through mitosis are discussed. The properties of transitional forms of Ribes nigrum L. intermediate between the juvenile and adult phase, are descrived and there implications discussed. Analogies are drawn between juvenile phenomena in woody perennials and in herbaceous species.