• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.1
• /
• pp.32-39
• /
• 2014

Traveling wave generation in a ring type stator has been studied. The basic working principle to create traveling wave has been modelled by the superposition of two orthogonal standing waves. Theoretical analysis shows that the length to radius ratio affects the frequency gap between two pseudo orthogonal modes used to create traveling wave. FEM simulation is then discussed and applied to validate the analytical model. At last, a possible optimal solution is reported with FEM verification.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.370-377
• /
• 2001

This paper proposed an eccentric annular ring microstrip antenna which has an asymmetric slot and a tuning stub for improving bandwidth and size of the circular microstrip patch antenna. The field characteristics of the eccentric annular ring microstrip antenna have been calculated by using the method of FDTD (finite difference time domain). The calculated results showed good agreement with the measured results. As a result of measurement, the antenna size and the bandwidth has been improved to that of 12.2 % and 4.8 % respectively, comparing to circular microstrip patch antenna.

• Journal of information and communication convergence engineering
• /
• v.8 no.4
• /
• pp.365-369
• /
• 2010

In this paper, a novel notch resonator is proposed based on Rectangular Split Ring Resonator (RRSS) element. We represented the electrical characteristics for R-SRR elements coupled with microstrip line, and measured result is compared with electromagnetic simulation (HFSS) result. We also solved equivalent circuit for R-SRR element, and also discussed influences of change structural parameters of R-SRR. The size of R-SRR is the most important parameters for frequency tuning. Also we can make tunable resonator form the basic structure. This novel resonator can apply to design of tunable bandpass filter and voltage control oscillator.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.526-528
• /
• 2018

This paper proposes a small, flexible dipole antenna for wireless power transmission of smart devices in a Wi-Fi environment. The proposed antenna is a mini-dipolar antenna structure with a split ring resonator in the center and is a small dipole antenna with a size of 32mm. The split ring resonator dipole antenna showed a reduction of about 20% compared to the same size of the dipole antenna.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.21-25
• /
• 1999

In order to remove minority carries of the base region at changing signal in conventional bipolar logic circuit, we made transistor which is composed of NPN transistor shortened buried layer under the Base region, PNP transistor which is merged in base, epi layer and substrate. Also the Ring-Oscillator for measuring transmission time-delay per gate was designed as well. In the result, we get amplitude of logic voltage of 200mV, the minimum of transmission delay-time of 211nS, and the minimum of transmission delay-time per gate of 7.26ns in AC characteristic output of Ring-Oscillator connected Gate.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.6-8
• /
• 2005

The plunger speed of solenoid actuator is affected by mass of plunger, magnetic motive force, inductance, and return spring. These factors are not independent but related with each other according to design characteristics of solenoid actuator. So, it is impossible to change the designed value for the purpose of increasing plunger speed. In this study, we have analyzed the characteristics of high-speed solenoid actuator having a non-magnetic ring which plays a role to concentrate the effective magnetic flux into plunger. For more detailed analysis, we have performed FEM analysis and decided the optimal attaching position and length on the guide tube based on these results. And, we proved the propriety of the non-magnetic ring effect by experiments.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.1
• /
• pp.95-101
• /
• 2012

An internal type roller ring gear(RRG) system composed of either a pin or a roller ring gear and its conjugated cam pinion can improve the gear endurance from that of a conventional gear system by reducing the sliding contact, while increasing the rolling motion. In this paper, we first proposed the exact cam gear profile and the self-intersection conditions obtained when the profile shift coefficient is introduced. Then, we investigated contact stresses and surface pitting life to fmd characteristics for surface fatigue by varying the shape design parameters. The results show that the pitting life can be extended significantly by increasing the profile shift coefficient.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.535-542
• /
• 2002

This paper show communication network scheme problem for the railway is solved which were electrical noise and line break in wayside using rerouting communication line, Considering the availability and the maintainability based on the reliability in design of communication networks. At first, Self-Healing Ring algorithm is suggested in that solution which is satisfied with above requirements. And also, in the advanced type, Dual Master scheme is suggested that the problem which is occurred in line break of both main and sub line at the same time can be solved using DMSHR(Dual Master Self Healing Ring). Therefore total reliability in railway system is going to be advanced using DMSHR scheme.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.3
• /
• pp.25-32
• /
• 1992

In UHF, VHF new design method of samll-sized 3-dB 0$^{\circ}$/180$^{\circ}$ ring hybrid terminated arbitrary impedance using both lumped elements and distributed elements is presented. At the center frequency of 900 MHz, 3-dB 0$^{\circ}$/180$^{\circ}$ ring hybrid terminated arbitrary impedance is designed, analyzed and tested. Good agreements are obtained between measured and theoretical modeling results, and at the same time, the circuit area of hybrid fabricated with two dimensional parallel coupled line, distributed elements and lumped elements is reduced by more than 70% compared with only distribyted-type circuits.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.4
• /
• pp.571-578
• /
• 1998

In this paper, we deal with a node weighted Steiner Ring Problem (SRP) arising from the deployment of Synchronous Optical Networks (SONET), a standard of transmission using optical fiber technology. The problem is to find a minimum weight cycle (ring) covering a subset of nodes in the network considering node and link weights. We have developed two mathematical models, one of which is stronger than the other in terms of LP bounds, whereas the number of constraints of the weaker one is polynomially bounded. In order to solve the problem optimally, we have developed some preprocessing rules and valid inequalities. We have also prescribed an effective heuristic procedure for providing tight upper bounds. Computational results show that the stronger model is better in terms of computation time, and valid inequalities and preprocessing rules are effective for solving the problem optimally.