• Journal of the Optical Society of Korea
• /
• v.20 no.2
• /
• pp.263-268
• /
• 2016

Broadband metal-dielectric-metal terahertz filters composed of complementary rings are designed and demonstrated. Four samples with different parameters were fabricated. Results measured using THz time-domain spectroscopy system show excellent agreement with simulations. Compared with the broadband filters reported before, the complementary ring structure in our design is insensitive to any polarization at normal incidence due to symmetry of the ring. Furthermore, the influence of structure parameters (such as period, radius, slot width, thickness and incidence angles) on the transmission characteristics has been investigated theoretically. The encouraging results afforded by designing of the filters could find applications in broadband sensors, terahertz communication systems, and other emerging terahertz technologies.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.24 no.2
• /
• pp.231-237
• /
• 2015

The pin-gear drive is a special form of fixed-axle gear mechanism. A large wheel with cylindrical pin teeth is called a pinwheel. As pinwheels are rounded, they have a simple structure, easy processing, low cost, and easy overhaul compared with general gears. They are also suitable for low-speed, heavy-duty mechanical transmission and for occasions with more dust, poor lubrication, etc. This paper introduces a novel slewing ring bearing with an external pinwheel gear set (e-PGS). First, we consider the exact cam pinion profile of the e-PGS with the introduction of a profile shift. Then, the contact stresses are investigated to determine the characteristics of the surface fatigue by varying the shape design parameters. The results show that the contact stresses of the e-PGS can be lowered significantly by increasing the profile shift coefficient.

• Elastomers and Composites
• /
• v.53 no.1
• /
• pp.13-18
• /
• 2018

A face seal comprising a metal ring and acrylonitrile butadiene rubber (NBR) was installed in the driving part and suspension unit. The seal serves as a bearing and simultaneously prevents entry of foreign matter from external environment as well as internal oil leakage. Subsequently, the rubber-rod ring generates axial pressure owing to rubber elasticity (hardness), performs static sealing function between housing details and outer diameter of seal, and transmits rotational torque to the rotating support ring. In order to improve the durability of NBR, which performs the above tasks, and to effectively use it in tracked-vehicle applications at extreme temperatures, this study reports a mixing design approach to enhance cold and oil resistances of NBR.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.1
• /
• pp.15-22
• /
• 1991

New design method of small-sized 3-dB $0^{\circ}/180^{\circ}$ ring hybrid and Wilkinson power divider using both lumped elements and distributed elements are presented. At the center frequency of 900 MHz 3-dB $0^{\circ}/180^{\circ}$ ring hybrid and Wikinson power divider are designed and tested. Good agreements are obtained between measured and theoretical modeling results, and at the same time the circuit area is reduced by more than 70% compared with the discributed-type circuits.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.908-909
• /
• 2015

본 논문은 항공기 추진용 전동기에 대한 논문으로 전동기 내부에 블레이드가 삽입되는 특징으로 인해 매우 얇은 요크폭과 항공기 시스템 효율을 위해 가볍게 설계해야 한다는 점을 제약조건으로 갖는 Ring-type PMSM 설계에 관한 논문이다. 본 논문에 언급되는 전동기의 경우 내부에 삽입되는 블레이드로 인해 내부 요크 폭이 매우 얇다는 제약조건에서 어떠한 전동기 타입이 적절한지 검토하였고, 네오디움(NdFeB) 자석을 사용하여 높은 자속밀도로 고출력을 얻는 동시에 높은 도전율과 얇고 넓은 자석 형상에 따라 발생하는 손실을 저감하기 위한 설계를 진행하였고 유한요소해석을 통해 감자를 고려하여 전자기적 성능을 확인하였다.

• Journal of Drive and Control
• /
• v.10 no.3
• /
• pp.7-13
• /
• 2013

Hydraulic vane pumps are widely used in various hydraulic systems because of its compactness and light weight. It is well known that the vanes and cam ring are separated by very thin liquid films which result in the EHL state. Contrary to the case of cylindrical roller bearings, the inlet and side boundary pressures are much higher than the atmospheric pressure. In this paper, a numerical solution of the EHL of finite line contacts between the cam ring and vane tip with profiled ends is presented. Using a finite difference method with non-uniform grids and the Newton-Raphson method, converged solutions are obtained for moderate load and material parameters. The EHL pressure distribution and film shape are considerably affected by pump delivery pressure and the side boundary condition applied. Both the maximum pressure and the minimum film thickness always occurred near the edge regions. The present results can be used in the design of optimum vane profile in hydraulic vane pump.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.848-853
• /
• 2001

A study about the shrink fits of rotor and retaining ring in generator was performed for the cases of three radial interference. The shrink-fitted retaining ring used to restrain the end turns of the winded coils in the rotor against centrifugal force requires very careful attention during design and manufacture because it has traditionally been the highest-stressed component of the generator. The contact pressures and residual stresses were obtained by the finite element analysis for each radial interference at zero, 100% rated, and 120% rated speeds, respectively. The results of analysis show that the radial interference in use needs to be increased carefully.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10A
• /
• pp.1603-1610
• /
• 1999

본 논문은 CMOS의 latch-up 특성을 개선하기 위한 효과적인 mask 설계 방법에 관한 것이다. Mask의 평면구조와 latch-up 파라메타와의 상관관계를 실물 제작에 의한 실험과 컴퓨터 시뮬레이션에 의해 도출하였으며, guard ring의 효과에 대해서도 비교 분석하였다. 실험 결과, 수평구조 바이폴라 트랜지스터의 전류증폭률($\beta$n)이 디자인룰에 반비례하였으며, 수직구조 바이폴라 트랜지스터의 전류증폭률($\beta$n)은 디지인룰과 무관하였다. 스위칭전압과 유지전류는 디자인룰에 비례하였다. Guard ring은 latch-up의 가능성을 줄이는 데 상당한 효과가 있었음이 확인되었으며, Guard ring이 없는 경우에 비하여 전류증폭률의 곱($\beta$n$\beta$n)이 약 31% 감소, 유지전류는 약 25%가 향상됨을 확인하였다.

• Journal of electromagnetic engineering and science
• /
• v.16 no.1
• /
• pp.29-34
• /
• 2016

This paper proposes a reconfigurable microstrip diplexer, also known as a switchplexer, for use with single-switch operation of frequency band and output path. The proposed switchplexer is composed of a rectangular ring resonator and a switch on a shorting pin, which is inserted between the ring resonator and the ground plane. The rotated main current distributions occurring at different switch statuses provide the diplexer's different operating bands and different output ports. The performance of the simply designed switchplexer is successfully demonstrated via simulation and measurement.

• Management Science and Financial Engineering
• /
• v.9 no.1
• /
• pp.11-27
• /
• 2003

In this study, we propose a mathematical model based on the graph theory for the wavelength assignment problem arising in the design of SDH (Synchronous Digital Hierarchy) over WDM (Wavelength Division Multiplexing) ring networks. We propose a branch- and -price algorithm to solve the suggested models effectively within reasonable time in realistic SDH over WDM ring networks. By exploiting the structure of ring networks, we developed a polynomial time algorithm for efficient column generation and a branching rule that conserves the structure of column generation. In a computer simulation study, the suggested approach can find the optimal solutions within reasonable time and show better performance than the existing heuristics.