• Carbon letters
• /
• 제5권4호
• /
• pp.159-163
• /
• 2004

The polymer-ceramic hybrid, known as 'ceramer', was synthesized by a sol-gel process by incorporating different amount of alkoxide as source of silicon in resorcinol-formaldehyde in presence of basic catalyst to get different percentage of silicon in ultimate carbonized composites. FTIR of the ceramer confirms that it is a network of Si-O-Si, Si-O-$CH_2$ and Si-OH type groups linked with benzene ring. Different amount of silicon in the ceramer exhibits varying temperature of thermal stability and lower coefficient of thermal expansion as compared to pure resorcinol-formaldehyde resin. The lower value of CTE in ceramer is due to existence of silica and resorcinol -formaldehyde in co-continuous phase. Unidirectional composites prepared with ceramer matrix and high-strength carbon fibers show lower value of flexural strength at polymer stage as compared to those prepared with resorcinol-formaldehyde resin. However, after heat treatment to $1450^{\circ}C$, the ceramer matrix composites show large improvement in the mechanical properties, i.e. with 7% silicon in the ceramer, the flexural strength is enhanced by 100% and flexural modulus value by 40% as compared to that of pure resorcinol-formaldehyde resin matrix composites.

• 한국공간구조학회논문집
• /
• 제16권4호
• /
• pp.101-108
• /
• 2016

Lifting plan in the large spacial structure is an important factor influencing the efficiency and economy of the construction process. The purpose of this study was deriving the requirements for lifting techniques as the basic research in the double spoke wheel roof structure construction. In the lift up erection method, management plan of the interference error in the column and outer-ring was needed that occur during lifting roof structure. In the bent erection method, material usage reduction plan was required by the structural design of the temporary bent. In the hybrid erection method, lifting plan was needed that minimizes weather condition and crane usage. All lifting techniques were required Value Engineering model for reduction of cost and construction period.

• 한국전자파학회논문지
• /
• 제19권2호
• /
• pp.181-190
• /
• 2008

본 논문에서는 BPSK 수신기를 제작함에 있어서 기존에 사용하던 6-port 수신기를 대신하여 4-port 수신기를 이용할 수 있음을 제안한다. 위의 수신기를 제작함에 있어서 1 Mbps의 데이터 율을 가지는 임의의 신호를 입력으로 사용하였고, 중심 주파수는 2.45 GHz에서 동작하는 직접 변환 수신기를 제작하였다. 수신기의 비교기는 OPA-847을 사용하여 제작하였다. 위의 실험을 바탕으로 BPSK 수신기 제작에 있어서 4-port수신기의 동작 특성이 6-port 수신기 만큼의 효과를 나타냄을 보인다.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.446-452
• /
• 2020

본 논문에서는 실외용 움직임 감지에 적합한 K대역 마이크로파 움직임 감지 센서를 활용한 에너지 절감형 LED 모듈을 제안하였다. 헤어핀 형태의 마이크로스트립 공진기를 이용한 발진기를 설계하여 안정성을 높이고 제작이 쉽도록 하였다. 신호의 방사를 위해 송수신 2채널 패치 배열 안테나를 개발하여 적용하였다. 수신된 신호로부터 도플러 천이 값을 획득하기 위해 윌킨슨 전력분배기 및 링 하이브리드 혼합기를 개발하여 적용하였다. 신호의 안정성 및 원치 않는 외부잡음으로부터 보호하기 위해 쉴드 캔을 제작하여 장착하였다. 제안된 움직임 감지 센서를 실증용 LED 모듈에 장착하여 에너지 절감 성능을 모의실험을 통하여 검증하였다.

• 한국전자파학회논문지
• /
• 제13권3호
• /
• pp.308-315
• /
• 2002

12 GHz 대역 미국의 위성 방송을 이동중인 차량내에서 수신하기 위한 능동 위상 배열 안테나 시스템용 5-비트 디지털 위상 변위기를 총 10개의 InGaAs HEMT를 가지고 설계, 제작하였다.. 11.25$^{\circ}$,22.5$^{\circ}$,45$^{\circ}$의 위상 비트들은 부하 선로형 방식으로, 90$^{\circ}$, 180$^{\circ}$의 위상 비트들은 링 하이브리드와 결합된 반사형 방식으로 각각 설계, 제작하였으며 각 위상 비트당 2개의 InGaAs HEMT를 사용하였다. 제작된 5-비트 위상 변위기는 12.2 GHz~12.7 대역에서 2개의 위상 응답에 대하여 17.5 ㏈ 이상의 반사 손실, 7.8 ㏈ 이하의 삽입 손실 및 초대 $\pm$6$^{\circ}$의 위상 오차가 측정되었다.

• Current Optics and Photonics
• /
• 제1권4호
• /
• pp.372-377
• /
• 2017

We demonstrate that the local resonance of metamaterials can be tuned by the effects of organic thin films under photoexcitation. Tris (8-hydroxyquinolinato) aluminum ($Alq_3$) layers are deposited on metamaterial/silicon hybrid structures. By varying the thickness of the $Alq_3$ layer on the subwavelength scale, the resonant peak of the metamaterial becomes very adjustable, due to the effect of a thin dielectric substrate. In addition, under photoexcitation all the spectral peaks of the resonance shift to higher frequencies. This originates from the reduction of the capacitive response generated inside the gaps of split-ring resonators. The adjustability of the electromagnetic spectrum may be useful for developing optical systems requiring refractive-index engineering and active optical devices.

• Corrosion Science and Technology
• /
• 제17권1호
• /
• pp.30-36
• /
• 2018

The high rate of corrosion of magnesium alloys makes it limited for industrial applications. Therefore, surface treatment is required to enhance their corrosion resistance. In our study, a chemical conversion coating for protecting the corrosion of the magnesium alloy, AZ31B, was prepared by using a phosphate-permanganate solution. The chemical conversion coating had a limited protection ability due to defects arising from cracks and pores in the coating layer. The sol-gel coating was prepared by using trimethoxymethylsilane (MTMS) and 3-glycidoxypropyltrimethoxysilane (GPTMS) as precursors, and aluminum acetyl acetonate as a ring opening agent. The corrosion protection properties of sol-gel and conversion coatings in 0.35wt% NaCl solution were measured by the electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization test. The EIS results indicated that the resistance of the chemical conversion coating with the sol-gel coating was significantly improved through the sol-gel sealed phosphate-permanganate conversion coating. The results of the potentiodynamic polarization test revealed that the sol-gel coating decreased the corrosion current density ($I_{corr}$). The SEM image showed that the sol-gel coating sealed conversion coating and improved corrosion protection.

• 한국통신학회논문지
• /
• 제7권2호
• /
• pp.71-77
• /
• 1982

本論文은 X-Band마이크로波周波數領域에서 MIC平面magic tee를 利用하여 平衡mixer를 구현하는 方法을 提示한다. 이 magic-tee는 일찍이 Ronde에 의하여 마이크로스트립과 슬로트線路로서 실현할 수 있음이 提示되었으며 또한 이 magic-tee가 rat-race나 hybridring보다 좋은 特性을 가지고 있음이 確認되었다. 本硏究에서는 3rd order(E-arm)와 2nd order(H-arm)의 Chebyshev整合回路를 設計한 MIC magic-tee와 2개의 對稱特性을 갖는 Schottkey barrier 다이오우드로 平衡mixer를 製作한 結果 VSWR<1.2 및 conversion loss=6dB 程度의 廣帶域mixer가 됨을 確認하였다.

• 한국기계가공학회지
• /
• 제15권2호
• /
• pp.22-30
• /
• 2016

It is very important to obtain the net shape of the product to maximize the shear cutting surface of fine blanking. In this paper, the fine blanking die was manufactured to achieve part characteristics, such as flatness and a fully sheared surface. The V-ring in the fine blanking die was designed to prevent lateral movement of the material. The fine blanking experiment was conducted with the fine blanking die. The material usage rate was increased by over 5.7% and that of the water-soluble lubricant was decreased by over 33% when the 2-cavity die technology was applied to fine blanking. The capacity of the existing press could lead to productivity improvement and cost reduction. Thus, 2-cavity die technology for fine blanking with a minute module of an accurate gear for producing seat recliner parts was developed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1408-1409
• /
• 2007

In this paper, we developed a hybrid simulation model of carbon laser ablation under the Ar plasmas consisted of fluid and particle methods. Three kinds of carbon particles, which are carbon atom, ion and electron emitted by laser ablation, are considered in the computation. In the present modeling, we adopt capacitively coupled plasma with ring electrode inserted in the space between the substrate and the target, graphite. This system may take an advantage of ${\mu}m$-sized droplets from the sheath electric field near the substrate. As a result, in Ar plasmas, carbon ion motions were suppressed by a strong electric field and were captured in Ar plasmas. Therefore, a low number density of carbon ions were deposited upon substrate. In addition, the plume motions in Ar gas atmosphere was also discussed.