• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.212-214
• /
• 2004

Hardware implemented ring buffer systems and methods are presented for the effective management of the ring buffer in TCP/IP communication. The layer interface of the ring buffer systems transfer free buffer and used buffer size information to the TCP/IP stack upper or low layer. The pointer updation interface calculates a temporary pointer from the data size which is needed by the present pointer of the ring buffer and upper or lowyer layer. The pointer manager of the ring buffer systems is responsible for saving the present pointer of the ring buffer, updating the ring buffer pointer to the new pointer, calculating the free buffer size and used buffer size of the ring buffer, and transferring the information to the upper layer. The ring buffer systems help the TCP/IP layer and TCP/IP upper or lower layer to decide the sending or receiving data size effectively. The delay of transferring data can be lowered by the ring buffer system.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1045-1054
• /
• 2020

In this paper, we designed a TCP/IP based ring buffer system that can stably transfer bulk data streams in the unstable network environments. In the scheme we proposed, The observation data stream generated and output by each radio observatory's backend system as a UDP frame is stored as a UDP packet in a large capacity ring buffer via a socket buffer in the client system. Thereafter, for stable transmission to the remote destination, the packets are processed in TCP and transmitted to the socket buffer of server system in the correlation center, which packets are stored in a large capacity ring buffer if there is no problem with the packets. In case of errors such as loss, duplication, and out of order delivery, the packets are retransmitted through TCP flow control, and we guaranteed that the reliability of data arriving at the correlation center. When congestion avoidance occurs due to network performance instability, we also suggest that performance degradation can be minimized by applying parallel streams.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.5
• /
• pp.371-375
• /
• 2000

In this paper a new conductivity modulated power transistor called the Lateral Insulated Gated Bipolar Transistor which included n+ ring and p-channel gate is presented. A new lateral IGBT structure is proposed to suppress latch-up and to improve turn off time by imploying n+ ring and p-channel gate and verified by MEDICI. The simulated I-V characteristics at $V_{G}$=15V show that the latch up occurs at $V_{A}$=18V and 6.9$\times$10$^{-5}$ A/${\mu}{\textrm}{m}$ for the proposed LIGBT while the conventional LIGBT latches at $V_{A}$=1.3V and 1.96${\mu}{\textrm}{m}$10$^{-5A}$${\mu}{\textrm}{m}$. It is shown that turn off characteristic of new LIGBT is 8 times than that of conventional LIGBT. And noble LIGBT is not n+ buffer layer because that It includes p channel gate and n+ ring. Therefore Mask for the buffer layer isn’t needed. The concentration of n+ ring is and the numbers of n+ ring and p channel gate are three for the optimal design.n.n.n.n.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.5
• /
• pp.1037-1050
• /
• 2000

A goal of a BISDN network is to provided integrated transport for a wide range of applications such as teleconferencing, Video On Demand etc. There require multipoint communications in addition to conventional point-to-point connections. Therefore multicast capabilities are very essential in multimedia communications. In this paper, we propose a new multicast cell scheduling method on the Parallel Multicast Packet Switch with Ring network: PMRN which are based on separated HOL. In this method, we place two different HOLs, one for unicast cells and the other for multicast cells. Then using non-FIFO scheduling, we can schedule both unicast cells and multicast cells which are available at the time in the input buffer. The simulation result shows that this method reduces the delay in the input buffer and increases the efficiency of both point-to-point network and ring network and finally enhances the bandwidth of the overall packet switch. A goal of a BISDN network is to provided integrated transport for a wide range of applications such as teleconferencing, Video On Demand etc. There require multipoint communications in addition to conventional point-to-point connections. Therefore multicast capabilities are very essential in multimedia communications. In this paper, we propose a new multicast cell scheduling method on the Parallel Multicast Packet Switch with Ring network: PMRN which are based on separated HOL. In this method, we place two different HOLs, one for unicast cells and the other for multicast cells. Then using non-FIFO scheduling, we can schedule both unicast cells and multicast cells which are available at the time in the input buffer. The simulation result shows that this method reduces the delay in the input buffer and increases the efficiency of both point-to-point network and ring network and finally enhances the bandwidth of the overall packet switch.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.3
• /
• pp.99-104
• /
• 2002

lateral insulated gate bipolar transistors(LIGBTs) are extensively used in high voltage power IC application due to their low forward voltage drops. One of the main disadvantages of the LIGBT is its scow switching speed when compared to the LDMOSFET. And the LIGBT with reverse channel structure is lower current capability than the conventional LIGBT at the forward conduction mode. In this paper, the LIGBT which included p+ ring and p-channel gate is presented at the reverie channel structure. The presented LIGBT structure is proposed to suppress the latch up, efficiently and to improve the turn off time. It is shown to improve the current capability too. It is verified 2-D simulator, MEDICI. It is shown that the latch up current of new LIGBT is 10 times than that of the conventional LIGBT Additionally, it is shown that the turn off characteristics of the proposed LIGBT is i times than that of the conventional LIGBT. It is net presented the tail current of turn off characteristics at the proposed structure. And the presented LIGBT is not n+ buffer layer because it includes p channel gate and p+ ring.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.92-98
• /
• 2000

A ring comprising a coated conductor was fabricated. A ring was made first using a biaxially textured Ni tape whose two ends were connected by means of the atomic diffusion bonding technique. Then buffer layers and a YBCO film were deposited on it. All the films were well textured as confirmed by XRD pole figures. The B-H loops, where B and H are the magnetic field at the center of the ring and the applied field respectively, were measured as a function of temperature. The persistent current density (J$_c$) flowing circularly was estimated from the remanent field of B. In the range of temperature from 72K to 20K, J$_c$ changed from zero to 2${\times}$1 0$^5$A/cm$^2$.

• Bulletin of the Korean Chemical Society
• /
• v.15 no.9
• /
• pp.782-785
• /
• 1994

The dissociation kinetics of linear polyaminopolycarboxylate complexes of lanthanide ions (L$n^{3+}: Ce^{3+},\;Eu^{3+}\;and\;Yb^{3+}$) has been studied in an aqueous solution of 0.10 M (NaCl$O_4$) at 25.0${\pm}0.1^{\circ}C$ using Cu(II) ions as a scavenger. The dissociation rates of acid-catalyzed pathway decrease in the order Ln(EPDTA$)^- > Ln(DPOT)^- > In(TMDTA)^- > Ln(MPDTA)^- > Ln(EDTA)^- > Ln(PDTA)^- > Ln(DCTA)^-$ according to the present and literature data. An increase in the N-Ln-N chelate ring from 5 to 6 and substitution of two methyl groups, one ethyl and hydroxyl group on a chelate ring carbon of these ligands leads to a decrease in kinetic stabilities of the complexes. The substitution of one methyl group and cyclohexyl ring on a ring carbon, however, results in a significant increase in the kinetic stability of the resulting $Ln^{3+}$ complexes. Individual reaction steps taking place for each system, with different copper, acetate buffer concentration and pH dependence, are also discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.139-150
• /
• 1997

For high-speed networks, a new ring protocal is proposed in this paper. A ring network combined with destination removal can achieve much higher network throughput than the channel transmission rate. However, such a network exhibits fairness problems. Over a past few years, global fairness algorithms such as ATMR and Metaring have been proposed to solve such problems. But the ring access time delay and fairness in such networks are sensitive to the network parameters such as network size and traffic distribution. In addition to guaranteeing fair ring access to all nodes, there are several other important performance aspects in such networks. The one is that fairness is enforced while node throughputs are kept as high as possible. And another performance measure is access delay and more specifically Head-Of-Line(HOL) delay, i.e., the amount of time the first cell in the transmission buffer of a node has to wait before it accesses the ring. HOL delay is a mijor component in the transmission jitter of the synchronous traffic transmission. A key idea of the proposed ring protocol is to find the nodes that have much more chances to access the ring than any other nodes in the independently distributed node architecture. Since destined by many cells need to share a part of the bandwidths with the next node for the fairness in as much as performance degradation does not become critical. To investigate the performance behavior of the proposed ring protocol for various network condition,s several performance parameters wuch as ring access time delay, and throughput are compared with those of the ATMR and Metaring protocols using simulation package, SIMAN.

• Transactions of the Society of Information Storage Systems
• /
• v.1 no.2
• /
• pp.188-191
• /
• 2005

Two different coverlayers which is useful for an optical buffer and a mechanical protection made of not only UV resin but also polycarbonate coversheet were prepared on small form factor optical disks. Thin coverlayer of 10 ${\mu}m$ and thick coverlayer of 80 ${\mu}m$ were fabricated. 10 ${\mu}m$-thick coverlayer was coated using UV resin material by spin coating method for the flying optical head application. On the other hand, 80 ${\mu}m$-thick coverlayer using coversheet with the resin bonding material was prepared for the non-flying optical head application. Both cases, the thickness uniformity seem to be the primary prerequisite factor, and it was analyzed. Thickness of 10 ${\mu}m$-thick UV resin coverlayer could be controlled within ${\pm}0.2m$ range and 80 ${\mu}m$-thick coversheet could be controlled within ${\pm}3{\mu}m$ range. However, the yield of such thickness tolerance was not good. New design of metal housing holder and polycarbonate outer ring was adopted to diminish the ski-jump phenomenon. Specifically, the polycarbonate outer ring was very effective to reduce the ski-jump. However, it should be careful to maintain uniform edge between disk and ring for the perfect coverlayer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.9B
• /
• pp.589-597
• /
• 2007

In this paper, a WDM metro ring consisting of access nodes with $FT-FR^n$ (Fixed Transmitter - n Fixed Receivers) is considered. A trade-off exists between node throughput and transmission fairness because the access nodes share wavelength channels. In order to eliminate the transmission unfairness and to increase throughput, the p-persistent medium access control (MAC) protocol is proposed: each node uses an empty optical slot to transmit a packet and make it available with the extraction of a transferred packet at the source access node, called source-stripping. The local empty slot can be used to transfer a head-of-line packet in the local buffer with probability p or it is used for the next downstream nodes with 1-p. The proposed MAC protocol provides better node throughput than the non-persistent protocol and exhibits better fairness index than the 1-persistent protocol in WDM ring networks. In addition, numerical analysis shows that the proposed MAC protocol maximizes the node throughput under uniform traffic conditions. For more detailed results, we use the network simulation under Poisson and self-similar traffic. Furthermore, unpredictable traffic constructed by the combination of the former and the latter is also considered. The reasonable probability of the p-persistent protocol for a given architecture can be determined through simulation.