• Structural Engineering and Mechanics
• /
• 제21권2호
• /
• pp.137-150
• /
• 2005

Dynamic analysis of dam-reservoir-foundation system is usually carried out by employing a simplified and approximate one-dimensional model to account for fluid-foundation interaction. The approximation introduced on this basis is examined thoroughly in this paper by comparing the method with the rigorous approach. It is concluded that the errors due to approximate method could be very significant both for horizontal and vertical ground motions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.848-855
• /
• 1989

By structural comparison of process optimization strategies based on Simultaneous Modular Approach, they can be classified into two groups : the Sequential Module Based Approach and the Two-Tier Approach. The Sequential Module Based Approach needs rigorous models and a set of accurate solutions are guranteed. However, it requires large amount of computation time. In the Two-Tier Approach composed of rigorous and simplified models, optimization calculation uses simplified models, therefore comparatively smaller amount of computation time is required but the obtained solutions may not be accurate. These optimization problems were somewhat improved by the alternate application of the two strategies. In this study, improved optimization strategy is suggested, in which Jacobian Matrix is modified to accomodate the strong points of above mentioned strategies. The results of case study show that this approach is superior to the other strategies.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1091-1098
• /
• 2012

This paper describes frequency response and propagation characteristics considering semiconducting screen in distribution cables. In CIGRE WG 21-05, Simplified Approach(SA) and Rigorous Approach(RA) which can revise the permittivity considering semiconducting screen propose for more detailed EMTP model and frequency dependant analysis. In this paper, the frequency dependent characteristics of complex permittivity are variously analysed by cole-cole function of RA. The attenuation, propagation velocity and surge impedance according to frequency range(1 kHz to 500 MHz) and cable length are also analysed by SA and EMTP simulation in distribution cables. The propagation velocity considering semiconducting screen is slower, and it is saturated over the range of 1 MHz. The signal is significantly attenuated as frequency range is high.

• 한국측량학회지
• /
• 제30권6_2호
• /
• pp.593-605
• /
• 2012

LiDAR systems provide dense and accurate topographic information. A pre-requisite to achieving the potential accuracy of LiDAR is having a proper system calibration, which aims at estimating all the systematic errors in the system measurements and the mounting parameters relating the different components. This paper presents a rigorous and two approximate methods for LiDAR system calibration. The rigorous approach makes use of the LiDAR equation and the system raw measurements. The approximate approaches utilize simplified LiDAR equations using some assumptions, which allow for less strict requirements regarding the raw measurements. The first presented approximate method, denoted as quasi-rigorous, assumes that we are dealing with a vertical platform (i.e., small pitch and roll angles). This method requires time-tagged point cloud and trajectory position data. The second approximate method, denoted as simplified, assumes that we are dealing with parallel strips, vertical platform, and minor terrain elevation variations compared to the flying height above ground. Such method can be performed using the LiDAR point cloud only. Experimental results using a real dataset, whose characteristics deviate to some extent from the utilized assumptions in the approximate methods, are presented to provide a comparative analysis of the outcome from the introduced methods.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.533-548
• /
• 2012

Dynamic analysis of concrete gravity dam-reservoir systems is an important topic in the study of fluid-structure interaction problems. It is well-known that the rigorous approach for solving this problem relies heavily on employing a two-dimensional semi-infinite fluid element. The hyper-element is formulated in frequency domain and its application in this field has led to many especial purpose programs which were demanding from programming point of view. In this study, a technique is proposed for dynamic analysis of dam-reservoir systems in the context of pure finite element programming which is referred to as the wavenumber approach. In this technique, the wavenumber condition is imposed on the truncation boundary or the upstream face of the near-field water domain. The method is initially described. Subsequently, the response of an idealized triangular dam-reservoir system is obtained by this approach, and the results are compared against the exact response. Based on this investigation, it is concluded that this approach can be envisaged as a great substitute for the rigorous type of analysis.

• Journal of Welding and Joining
• /
• 제28권2호
• /
• pp.39-46
• /
• 2010

IIn this study, used is the equivalent loading method based on the inherent strain to predict the welding deformation of panel members. Equivalent loads are computed from the inherent strain distribution around weld line, and then applied for the linear finite element analysis. Thermal deformation of panel members can be, of course, carried out through the rigorous thermal elasto-plastic analysis procedure but it is not practical in applying to predicting the welding deformation of large structures such as blocks found in a ship structure from view of computing time. The present equivalent load approach has been applied to flat plate model to verify the present approach, and to several curved plate models having the curvature in the welding direction to investigate the effect of the longitudinal curvature upon the weld-induced deformation. The results are compared with those by thermal elasto-plastic analysis. As far as the present results are concerned, it can be said that the present approach shows good agreement with the results by welding experiment and the rigorous thermal elasto-plastic analysis. The present approach has been also applied to predict the welding deformation of panel block as for application illustration to practical model.

• Structural Engineering and Mechanics
• /
• 제30권5호
• /
• pp.619-645
• /
• 2008

This study presents the efficiency of simulating structural systems using a method that combines a simplified component model (SCM) and rigorous component model (RCM). To achieve a realistic simulation of structural systems, a numerical model must be adequately capturing the detailed behaviors of real systems at various scales. However, capturing all details represented within an entire structural system by very fine meshes is practically impossible due to technological limitations on computational engineering. Therefore, this research develops an approach to simulate large-scale structural systems that combines a simplified global model with multiple detailed component models adjusted to various scales. Each correlated multi-scale simulation model is linked to others using a multi-level hierarchical modeling simulation method. Simulations are performed using nonlinear finite element analysis. The proposed method is applied in an analysis of a simple reinforced concrete structure and the Reuipu Elementary School (an existing structure), with analysis results then compared to actual onsite observations. The proposed method obtained results very close to onsite observations, indicating the efficiency of the proposed model in simulating structural system behavior.

• 한국광학회지
• /
• 제10권4호
• /
• pp.348-353
• /
• 1999

엄밀한 결합파를 적용하는 광선광학적 방법에 의해, 임의의 격자구조를 갖는 도파로 회절소자의 결합계수를 계산하였다. 엄밀한 광선광학적 방법으로 다양한 격자구조(사각형, 정현파, 삼각형, 사다리꼴)에 대한 결합계수를 계산하였으며, 기존의 근사적 광선광학적 방법이나 결합모드 방법들과 비교 분석하였다. 특히, 사각형 격자의 경우에는 격자의 깊이 변화뿐만 아니라 격자영역비(duty-cycle)에 따른 결합계수를 구하였다. 엄밀한 광선광학적 방법은 강한 결합조건에서도 기존의 방법들에 비하여 도파로 회절격자의 결합계수를 매우 정확하게 결정할 수 있음을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.276-280
• /
• 2004

This paper first takes advantage of a rigorous modal transmission-line theory (MTLT) to analyze the filtering properties of optical waves guiding by grating-assisted fiber couplers (GAFCs). The numerical results reveal that MTLT serves as a suitable and powerful approach to evaluate systematically the dispersion properties and the characteristics of optical power transfer in GAFCs.

• 한국인터넷방송통신학회논문지
• /
• 제15권1호
• /
• pp.261-267
• /
• 2015

다층 격자구조에서 전파하는 평면파들의 회절특성을 나타내는 고유치 문제는 모드 확장 원리에 의하여 정확하게 설명할 수 있다. 그런 모드 확장 원리들에 의존하는 모드 해들은 간단한 회로이며 일반적인 형태인 등가 전송선로 망에 의하여 분석할 수 있다. 이 해석법은 어떤 조건에서든 필드들의 격자 회절과정에 대한 상당한 물리적 직관성을 제공하는 해석적인 특성을 준다. 특히, 등가 전송선로 망은 다른 해석법들에서 해석적으로 구할 수 없는 회절 격자구조의 산란특성, 방출효과 그리고 다른 광학적 특성들을 체계적으로 평가하기 위한 컴퓨터 알고리즘의 템플릿으로서 사용될 수 있다. 본 논문에서 제안한 정확한 해석법의 타당성을 입증하기 위하여 앞서 연구한 논문들의 결과를 수치해석적으로 비교 분석하였다. 그 결과 본 논문에서 얻은 내용과 잘 일치함을 확인할 수 있었다.