1 |
Akkar, S. and Metin, A. (2007), 'Assessment of improved nonlinear static procedures in FEMA-440', ASCE J. Struct. Eng., 133(9), 1237-1246
DOI
ScienceOn
|
2 |
Martino, R., Spacone, E., and Kingsley, G. (2000), 'Nonlinear pushover analysis of RC structures', Proceeding of Structures Congress 2000, Philadelphia, May
|
3 |
Mwafy, A.M. and Elnashai, A.S. (2001), 'Static pushover versus dynamic collapse analysis of RC buildings', Eng. Struct., 23, 407-424
DOI
ScienceOn
|
4 |
Lubliner, J., Oliver J., Oller S., and Onate, E. (1989), 'A plastic-damage model for concrete', International J. Solids Struct., 25, 299-329
DOI
ScienceOn
|
5 |
Lin, Y.Z. (2006), A Database of the Compulsory School Buildings and Comparison between Seismic Evaluation Methods in Taiwan, Thesis, Department of Construction Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, R.O.C
|
6 |
Lowes, L.N. (1999), Finite Element Modeling of Reinforced Concrete Beam-Column Bridge Connections, Dissertation, Graduate Division of Civil Engineering, University of California, Berkeley, USA
|
7 |
Kwan, W.P. and Billington, S.L. (2001), 'Simulation of structural concrete under cyclic loading', ASCE J. Struct. Eng., 127(12), 1391-1401
DOI
ScienceOn
|
8 |
Chintanapakdee, C. and Chopra, A.K. (2004), 'Seismic response of vertically irregular frames: Response history and modal pushover analysis', ASCE J. Struct. Eng., 130(8), 1177-1185
DOI
ScienceOn
|
9 |
Ghugal, Y.M. and Shimpi, R.P. (2001), 'A review of refined shear deformation theories for isotropic and anisotropic laminated beam', J. Reinf. Plast. Comp., 20(3), 255-27
DOI
ScienceOn
|
10 |
Lee, J. and Fenves, G.L. (1998), 'Plastic-damage model for cyclic loading of concrete structures', J. Eng. Mech., 124(8), 892-900
DOI
ScienceOn
|
11 |
Lowes, L.N. and Altoontash, A. (2003), 'Modeling of reinforced concrete beam-column joints subjected to cyclic loading', ASCE J. Struct. Eng., 129(12), 1686-1697
DOI
ScienceOn
|
12 |
Mander, J.B., Priestley, M.J.N., and Park, R. (1988), 'Theoretical stress-strain model for confined concrete', ASCE J. Struct. Eng., 114(8), 1804-1826
DOI
ScienceOn
|
13 |
Mitra, N. and Lowes, L.N. (2007), 'Evaluation, calibration, and verification of a reinforced concrete beamcolumn joint model', ASCE J. Struct. Eng., 133(1), 105-120
DOI
ScienceOn
|
14 |
Palermo, D. and Vecchio, F.J. (2007), 'Simulation of cyclically loaded concrete structures based on finite element method', ASCE J. Struct. Eng., 133(5), 728-738
DOI
ScienceOn
|
15 |
Sung, Y.C., Liu, K.Y., Su, C.K., Tsai, I.C., and Chang, K.C. (2005), 'A study on pushover analysis of reinforced concrete column', Struct. Eng. Mech., 21(1), 35-52
DOI
ScienceOn
|
16 |
Krishna Murty, A.V. (1984), 'Toward a consistent beam theory', Am. Inst. Aeronaut. Astronaut. J., 22, 811-816
DOI
ScienceOn
|
17 |
Lan, Y.M. (1998), Finite Element Study of Concrete Column with Fiber Composite Jackets, Dissertation, School of Civil Engineering, Purdue University, West Lafayette, Indiana, USA
|
18 |
Goel, R.K. and Chopra, A.K. (2005), 'Modal pushover analyses for unsymmetric buildings', Proceeding of Structures Congress 2005, New York, April
|
19 |
Koksal, H.O. (2006), 'A failure criterion for RC members under triaxial compression', Struct. Eng. Mech., 24(2), 137-154
DOI
ScienceOn
|
20 |
FEMA (2004), Improvement of Nonlinear Static Seismic Analysis Procedure, Report No. FEMA-440 (ATC-55 Project), Federal Emergency Management Agency, Washington, D.C., USA
|
21 |
Darwin, D. (1991), 'Reinforced concrete', Proceeding of the ASCE-ACI International Workshop of Finite Element Analysis of Reinforced Concrete Structures II, New York, June
|
22 |
ETABS (2005), ETABS Version 9 User Interface Reference Manual, Computers and Structures, Inc., Berkeley, California, USA
|
23 |
FEMA (1997), NEHRP Guidelines for the Seismic Rehabilitation of Buildings, Report No. FEMA-273, Federal Emergency Management Agency, Washington, D.C., USA
|
24 |
Chung, L.L., Jean, W.Y., Yeh, Y.K., and Hwang, S.J., (2006), 'Strategy for seismic evaluation and retrofit for school buildings', International Training Program for Seismic Design of Structures 2006, National Center for Research on Earthquake Engineering, Report Number NCREE-06-014, Taipei, Taiwan
|
25 |
D'Ambrisi, A. and Fillippou, F.C. (1999), 'Modeling of cyclic shear behavior in RC members', ASCE J. Struct. Eng., 125(10), 1143-1150
DOI
|
26 |
ATC-40 (1996), Seismic Evaluation and Retrofit of Concrete Buildings, Applied Technology Council, California, USA
|
27 |
Chen, W.F., Yamaguchi, E., Kotsovos, M.D., and Pan, A.D. (1991), 'Constitutive models', Proceedings of the ASCE-ACI International Workshop of Finite Element Analysis of Reinforced Concrete Structures II, New York, June
|
28 |
Tu, Y.H., Hwang, S.J., and Chiou, T.C. (2006), 'In-site pushover tests and seismic assessment on school buildings in taiwan', Proceeding of 4th International Conference on Earthquake Engineering, No. 147, Taipei, October
|
29 |
ACI-318 (2005), Building Code Requirements for Structural Concrete (ACI 318-05) and Commentary (ACI 318R-05), American Concrete Institute, Detroit, Michigan, USA
|
30 |
ABAQUS (2004), ABAQUS Version 6.5 Documentation, ABAQUS, Inc., Providence, Rhode Island, USA
|
31 |
Rebello, C.A., Bert, C.W., and Gordaninejad, F. (1983), 'Vibration of bimodular sandwich beams with thicks facings: A new theory and experimental results', J. Sound Vib., 90(3), 381-397
DOI
ScienceOn
|
32 |
Silva, M.A., Swan, C.C., Arora, J.S., and Brasil, R.M.L.R.F. (2001), 'Failure criterion for RC members under biaxial bending and axial load', ASCE J. Struct. Eng., 127(8), 922-929
DOI
|