1 |
Bang, K., Habib, A., and Kersting, A., (2010), Estimation of Biases in LiDAR System Calibration Parameters using Overlapping Strips. Canadian Journal of Remote Sensing, Vol. 36, Suppl. 2, pp. S335-S354.
DOI
|
2 |
Burman, H., (2000), Calibration and Orientation of Airborne Image and Laser Scanner Data Using GPS and INS, Ph.D. dissertation, Royal Institute of Technology, Stockholm, 125p.
|
3 |
Filin, S., (2001), Calibration of Spaceborne and Airborne Laser Altimeters Using Natural Surfaces, Ph.D. dissertation, Department of Civil and Environmental Engineering and Geodetic Science, the Ohio-State University, Columbus, OH, 129p.
|
4 |
Friess, P., (2006), Toward a rigorous methodology for airborne laser mapping, Proceedings of EuroCOW, Castelldefels, Spain, unpaginated CD-ROM.
|
5 |
Habib, A., K. Bang, A.P. Kersting, and D.C. Lee, (2009), Error budget of LiDAR Systems and Quality Control of the Derived Data, Photogrammetric Engineering and Remote Sensing, Vol. 75, No. 9, pp. 1093-1108.
DOI
ScienceOn
|
6 |
Habib, A., A.P. Kersting, K. Bang, and D.C. Lee, (2010a), Alternative methodologies for the internal quality control of parallel LiDAR strips, IEEE Transactions on Geoscience and Remote Sensing, Vol. 48, No. 1, pp. 221-236.
DOI
ScienceOn
|
7 |
Habib A., K. Bang, A. P. Kersting, and J. Chow, (2010b), Alternat ive Methodologies for LiDAR System Calibration, Remote Sensing, Vol. 2, No. 3, pp. 874-907.
DOI
|
8 |
Habib, A., Kersting, A., Shaker, A., and Yan, W., (2011), Geometric Calibration and Radiometric Correction of LiDAR Data and their Impact on the Quality of Derived Products. Sensors, Vol. 11, No. 9, pp. 9069 - 9097.
DOI
ScienceOn
|
9 |
Morin, K.W., (2002), Calibration of Airborne Laser Scanners, M.S. thesis, University of Calgary, Department of Geomatics Engineering, Calgary, AB, 125p.
|
10 |
Kersting, A.P., (2011), Quality Assurance of Multi-Sensor Systems, Ph.D. dissertation, University of Calgary, Department of Geomatics Engineering, Calgary, AB, 265p.
|
11 |
Kersting, A.P., Habib, A., Bang, K., and Skaloud, J., (2012), Automated approach for rigorous light detection and ranging system calibration without preprocessing and strict terrain coverage requirements. Journal of Optical Engineering, 51, 076201 (2012), DOI:10.1117/1.OE.51.7.07620.
DOI
|
12 |
Schenk, T., (2001), Modeling and Analyzing Systematic Errors in Airborne Laser Scanners, Technical Report in Photogrammetry No. 19, The Ohio State University.
|
13 |
Skaloud, J., J. Vallet, K. Keller, G. Veyssiere, and O. Koelbl, (2005), HELIMAP: Rapid large scale mapping using handheld LiDAR/CCD/GPS/INS sensors on helicopters, Proceedings ION GNSS 2005, Long Beach, CA, USA, 13-16 September, pp. 2461-2467 CDROM.
|
14 |
Skaloud, J., and D. Lichti, (2006), Rigorous Approach to Bore-Sight Self-Calibration in Airborne Laser Scanning, ISPRS Journal of Photogrammetry and Remote Sensing, 61: 47-59.
DOI
ScienceOn
|
15 |
Toth, C.K., (2002), Calibrating airborne lidar systems, Proceedings of ISPRS Commission II Symposium, Xi'an, China, pp. 475-480.
|
16 |
Wehr, A., and U. Lohr, (1999), Airborne laser scanning- an introduction and overview, ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 54, pp. 68-82.
DOI
ScienceOn
|