• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.352-355
• /
• 2007

We have developed tight bonding of plastic LCD with new rigid spacer. For tight bonding of two plastic substrates, we designed structures to collect UV or thermal epoxy placed on the top of rigid spacer spontaneously by capillary effect. We confirmed that tight bonded plastic LCD has a good adhesion without induced defects and a high mechanical stability against the various external deformations. This method can be applicable to the fabrication of large plastic LCDs using stamping process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.756-759
• /
• 2007

We have fabricated pentacene OTFT on ultra-thin flexible polyimide film with a rigid glass support. Polyimide film of the thickness of $10{\mu}m$ has formed on glass by spin coating from the solution. After the entire OTFT process, the OTFT exhibited a fieldeffect mobility of $0.4\;cm^2/Vs$, an $I_{on}/I_{off}$ ratio of $10^7$ and a subthreshold swing of 0.7 V/dec. The OTFT on polyimide film has been detached from the glass support and laminated on a plastic support of $130\;{\mu}m-thick$ PET film. After the detach process, in spite of the degrading of its field-effect mobility, the OTFT showed high $I_{on}/I_{off}$ as high $as{\sim}10^6$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.86-88
• /
• 2008

Organosiloxane based spin on planarizing dielectrics (PTS-E and PTS-R) were developed for application in flat panel displays as a replacement to conformal chemical vapor deposited SiNx. Here we demonstrate the successful use of siloxane-based material as a passivation layer for active matrix $\alpha$-Si thin film transistors (TFT) on both rigid and flexible substrates.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.3
• /
• pp.885-890
• /
• 2024

This study proposes a secure keypad structure that can adapt to screen changes in mobile devices equipped with stretchable display. For this purpose, we compared and analyzed the authentication methods applied to current rigid form factor smartphones with those applied to rollable and bendable display based smartphones, which are the previous stages of stretchable display. Based on the results of this analysis, we identified potential user convenience and security safety issues that may arise in the form factor structure for smart wallets, multitasking, screen expansion and media viewing, and gaming and entertainment applications where stretchable displays will be applied, then proposed a security keypad structure for these form factors. Our keypad structure provides enhanced user convenience and security compared to the structures applied in the smartphone environment based on the conventional rigid display form factor and rollable, bendable display form factor.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.102-104
• /
• 2019

Registering different kinds of clinical images widely used in diagnostic and surgery planning. However, cause of tumor growth or effected by gravity, human tissue has plenty of non-rigid deformation with clinically. Non-rigid registration allows the mapping of straight lines to curves. Therefore, such local deformation makes registration more complicated. In this work, we mainly introduce intra-subject, inter-modality registration. This paper mainly studies the nonlinear registration method of 2D medical image registration. The general medical image registration algorithm requires manual intervention, and cost long registration time. In our work to reduce the registration time in rough registration step, the barycenter and the direction of main axis of the image is calculated, which reduces the calculation amount compared with the method of using mutual information.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1189-1192
• /
• 2006

We have demonstrated the novel technique for spacing two flexible substrates in stable by using rigid pillar spacer array and micro-contact printing assembling technique. Specially designed columnar structure generates self-collected adhesive polymer feature results in a good adhesion and a high mechanical stability to the external bending deformations.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.78-81
• /
• 2008

We developed tight adhesion techniques of two plastic substrates to maintain cell gap stability for rugged flexible LCDs. By combining rigid spacers and several adhesion materials, we demonstrated mechanically very stable flexible LCDs against pressure and bending.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1125-1128
• /
• 2007

The laminating technique for developing flexible liquid crystal display was demonstrated by using a thin UV curable polymer film and a plastic substrate with patterned polymer wall structure. We adopted the rigid wall structure to provide a solid mechanical support for the stable molecular alignment of liquid crystals (LCs) in the device. The cover film was prepared to have an ability of aligning LC molecules by patterning a micro-groove structure using the soft-lithographic process. These two substrates can be assembled tightly by the laminating and one-step UV irradiation process because of the adhesive nature of the used UV curable polymers. Proposed method can be used to fabricate the flexible LC display with simplicity and also be applicable for a cost-effective roll-to-roll process.

• Journal of Information Display
• /
• v.8 no.4
• /
• pp.1-4
• /
• 2007

In the present study, we propose Monte Carlo simulation that takes into consideration the interface phenomena between liquid crystal and substrate. We use rigid model molecules of liquid crystal and substrate. Interface is generated using potential field that induces decomposition of molecules. We use hard spherocylinders as model liquid crystal molecules. Substrate is modeled as region composed of shorter spherocylinders. Our results show that there is a case in which nematic order is reinforced in the vicinity of rubbed substrate.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.47-51
• /
• 2011

We investigated the substrate surface polishing by the spherical rigid abrasive under the compression using classical molecular dynamics modeling. We performed three-dimensional molecular dynamic simulations using the Morse potential functions for the various slide-to-roll ratios, from 0 to 1, and then, the compressive forces acting on the spherical rigid abrasive were calculated as functions of the time and the slide-to-roll ratio. The friction coefficients obtained from the classical molecular dynamics simulations were compared to those obtained from the experiments; and found that the molecular dynamic simulation results with the slide-to-roll ratio of 0 value were in good agreement with the experimental results.