• 의료법학
• /
• 제13권2호
• /
• pp.285-308
• /
• 2012

The Korean supreme court said that Mrs Kim who was in a persistent vegetative state had a right to die if she had a presumed will or assumption of dying against Severance hospital in 2009. Presumed would be vague and can not be subjective to conjecture though, the court had a developed trial on the case. I recommend the higher valued notion such as the 'right to decide on the life extension' is more logical than assumptive will. To achieve this recommendation, I will search right to life, right to decision, human dignity and find the good relationship between them. In conclusion, I will announce that if PVS patients without advanced directives aren't able to express their will and no one could not assume their right to die in spite of meaningless life extension. So only the due and strict procedure about the extinction of meaningless PVS patients will allow them to sacrifice themselves or remove life extension ventilators. Also active euthanasia would be possible under the strict procedure of making advanced directives and the act of helping active euthanasia additionally, the crime of abetting suicide would not be executed in the legal scope.

• 소성∙가공
• /
• 제23권2호
• /
• pp.88-94
• /
• 2014

The under-drive brake piston is an essential part in the automatic transmissions of automobiles. This component is manufactured by forging after blanking from S55C plate with a thickness of 6mm. It is difficult to design the plate forging process using a thick plate approach since there will be limited material flow as well as large press loads. Furthermore, the under-drive brake piston has a complex shape with a right angle step, which often results in die unfill and abrupt increase in press load. To overcome these obstacles, a separate die for filling material sufficiently to the corner of the right angle step is proposed. However, this approach induces an uncontrolled workpiece surface between the dies, resulting in flash. This excess flash degrades the tool life in the final machining after cold forging as well as increases the cycle time to obtain the net-shape of the part. In the current study, we propose an optimum process design using a conventional die shaped with the benefit of finite element analysis. This approach enhanced the process efficiency without sacrificing the dimensional accuracy in the forged part. As the result, the optimum plate forging process was done with a two stage die, which reduces weight of by 6% compared with previous process for the under-drive brake piston.

• 의료법학
• /
• 제9권1호
• /
• pp.413-459
• /
• 2008

The Law has intervened to define rare circumstances in which a person should choose continuing life in United States. On the one hand, the law has traditionally acted to preservelife and to respect the sanctity of life. On the other hand, one's control over one's own body, and the right to determine what kind of medical care one will receive, is equally well respected and historically grounded. The competent patients have the right to forgo life-sustaining treatment, courts in United States have left many unanswered questions about the nature of that right. The right to choose to forgo life-sustaining treatment is a manifestation of a patient's autonomy interest. In United States, The Karen Quilan case gave rise to legislative activity in the host of state capitals, and several states had adopted statutes that formally recognized some forms of written directives describing some circumstances in which certain kinds of medical care could be terminated. These statues were sometimes dominated 'living will' acts, sometimes 'right to die' acts and ocasionally 'natural death' acts. Today virtually every state has produced a living will statue. In Korea, courts do not permit a terminally ill person to withhold or withdraw life-sustaining treatment. Living wills apply in case of terminal illness owing to a defect in legislation. Now In Korea, these lively dispute of legal policy on the preconditions and concrete procedure of living will act and natural death act. Through the legislation of living will act and natural death act, we should prepare some circumstances to respect patient's autonomy on the right to die. We should frame the cultural standard to make a decision of forgoing life-sustainin1g treatment under the discreet procedure.

• Design & Manufacturing
• /
• 제12권3호
• /
• pp.31-35
• /
• 2018

In this paper, the method of improving the flatness and perpendicularity for a corner fixing bracket of the large display frame is studied through experiments. Three specimens were tested, one specimen not subjected to bending line before bending, and two specimens with a straight groove with 0.2 mm and 0.5 mm depth. Experimental results show that the flatness of bracket becomes worse with deeper depth. When there is no straight groove, the perpendicularity becomes worse. For the flatness correction, a restriking process was added. The twist of bracket was corrected by performing the restriking with a curvature larger than the twist amount in the direction opposite to the deformed direction. We also found that the perpendicularity is maintained regardless of the amount of curvature with the restriking process.

• 한국산학기술학회논문지
• /
• 제7권4호
• /
• pp.554-558
• /
• 2006

금형산업체의 직무능력 요구에 적응하는 산업현장과 연계된 실무능력 향상을 위한 대학의 금형기술 교육이 필요하다. 특히, 취업 후 회사의 사전교육 없이 직능별 업무에 투입 시킬 수 있는 창의력 있는 우수한 전문기술인을 양성하여 교육의 낭비적 요소를 제거하고 산업체 및 국가의 기술경쟁력을 강화 시키며 학생은 인력수요자인 산업체로부터 요구하는 현장실무에 접근성 높은 교육을 받아 취업이 보장되어야 한다. 또한 산업체는 전문인력 수급의 어려움을 해소 시켜주기 바라고 있다. 이상의 요구를 충족시킬 목적으로 금형산업체와 연계된 금형설계공학전공의 교육과정 개발을 수행하였다.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.62-69
• /
• 2000

Uneven clearances in the left and right sides of a press die cause deformation of the punch in precision shearing process. This deformation results from the compression stress and bending moment from shearing force in vertical direction and from the side force in horizontal direction acting to the punch, In this study the behavior of punch deformation is investigated in order to clarify the deformation state of the punch by using strain gauge deformation to shearing force side force bending moment radius of curvature and shear plane of the punch. Also we presented the calculation method of deformation size for the punch.

• 소성∙가공
• /
• 제32권2호
• /
• pp.61-66
• /
• 2023

The quality of the sheared surface affects the stretch flangeability of steel sheet. The quality of sheared surface is influenced by several process factors such as die clearance, shape of cutting edge, use of counter punch, and shear. In this paper, the influence of these shearing process factors on the stretch flangeability of the HSS (DP980) was analyzed through a shearing and a stretch flangeability test. When the die clearance was 10%, the effect of these shearing process factors on the stretch flangeability was the greatest, and the use of an acute angle blade was found to be more advantageous in the stretch flangeability than a right angle blade. It was found that the stretch flangeability was improved when active bending was applied during shearing.

• 한국산학기술학회논문지
• /
• 제9권2호
• /
• pp.276-280
• /
• 2008

본 연구에서 개발할 설계기술은 부가가치가 매우 높은 소량 다품종 건축용 내 외장재의 금속 패널 코너가공 법에 관한 것이다. 금속 금구류 및 건축용 내 외장재로 사용되는 2.5mm이상 되는 금속강판을 사용함에 있어서 가장 문제가 되는 직각코너링 접합부위에서 발생되는 내식성(수명성), 내후성, 및 미려성(디자인)을 향상시키므로 품질의 향상뿐만 아니라 소량 다품종의 생산성을 증대시킬 수 있는 국내 최초 금속패널 코너가공을 할 수 있는 벤딩 다이시스템(Bending Die System)을 설계하고자 한다.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1518-1522
• /
• 2008

본 연구에서 개발한 벤딩다이시스템(Bending Die System)제작기술은 부가가치가 매우 높은 소량 다품종 건축용 내 외장재의 금속 패널 코너가공법에 관한 것이다. 금속 금구류 및 건축용 내 외장재로 사용되는 2.5mm이상 되는 금속강판을 사용함에 있어서 가장 문제가 되는 직각코너링 접합부위에서 발생되는 내식성, 내후성, 및 디자인을 향상시키므로 품질의 향상뿐만 아니라 소량 다품종의 생산성을 증대시킬 수 있는 국내 최초 금속패널 코너가공을 할 수 있는 벤딩다이시스템을 설계하여 제작하였다. 이를 제작하여 경제적, 기술적으로 고부가가치를 창출하여 수출증대에 기여할 수 있다.

• 의료법학
• /
• 제23권2호
• /
• pp.67-96
• /
• 2022

인간의 존엄성과 환자의 자율성에 터잡아 연명의료의 중단이 제도화된 이래, 최근에는 스스로 존엄하게 죽음에 이르기 위해 환자가 자기 생명을 단축시키고자 의료적 도움을 받을 권리가 있는지, 그러한 행위가 어느 범위에서 정당화될 수 있는지의 문제가 활발하게 논의되고 있다. 우리나라에서는 2016년 연명의료결정법의 제정으로 연명의료중단이 제도화된 이래 여러 차례 개정을 거쳤는데, 최근에는 '조력존엄사'를 합법화하기 위한 내용의 연명의료결정법 개정안이 발의되었다. 이번 개정안에서는 조력존엄사를 '환자의 의사로 담당의사의 조력을 통해 스스로 삶을 종결하는 것'으로 정의하고 있는데, 이는 네덜란드, 벨기에 등의 유럽 국가와 미국 일부 주에서 시행되고 있는 조력사망(Aid in Dying)에 해당하는 내용으로 보인다. 조력사망이란 의사결정능력이 있는 환자가 치료가 불가능한 질병으로 고통을 받고 있을 때 환자가 사망을 앞당길 수 있는 약물을 의사로부터 처방받아 이를 이용하여 사망에 이르는 것을 의미한다. 존엄사에 대한 논의는 연명의료중단에서 조력사망의 순서로 진행되는 것이 세계적 추세인데, 2000년대에 이르러 일부 국가에서는 조력사망, 나아가 적극적 안락사까지 합법화하였다. 미국에서는 오리건 주를 필두로 여러 주에서 조력사망을 인정하는 법률을 두고 있지만 적극적 안락사에 대해서는 금지하고 있다. 이 논문에서는 일찌기 존엄한 죽음에 관한 논의를 시작하여 환자의 자기결정권을 제도화한 미국의 일부 주에서 조력사망의 입법화가 어떤 과정을 거쳐 이루어졌는지를 살펴보고 캘리포니아의 임종선택법의 주요 내용과 법시행 이후의 결과를 분석하였다.