Browse > Article

A study on torsion correction of corner fixing bracket for large display frame  

Kim, Byung-Joo (Department of Mold & Die Engineering, kongju National University)
Yun, Jae-Woong (Department of Mold & Die Engineering, kongju National University)
Publication Information
Design & Manufacturing / v.12, no.3, 2018 , pp. 31-35 More about this Journal
Abstract
In this paper, the method of improving the flatness and perpendicularity for a corner fixing bracket of the large display frame is studied through experiments. Three specimens were tested, one specimen not subjected to bending line before bending, and two specimens with a straight groove with 0.2 mm and 0.5 mm depth. Experimental results show that the flatness of bracket becomes worse with deeper depth. When there is no straight groove, the perpendicularity becomes worse. For the flatness correction, a restriking process was added. The twist of bracket was corrected by performing the restriking with a curvature larger than the twist amount in the direction opposite to the deformed direction. We also found that the perpendicularity is maintained regardless of the amount of curvature with the restriking process.
Keywords
Correction; Flatness; Right angle; V-bending;
Citations & Related Records
연도 인용수 순위
  • Reference
1 IHS Markit large-displays market outlook 2018, 1.
2 Kim Se-hwan, "Defects and countermeasures of press mold", Daekwang Seorim Publishing Co., pp. 57-60 2013. 3.
3 Park Se-gye, "Effect of Anisotropy on Springback Prediction in Forming of High Strength Steel Sheet", Yeungnam University Graduate School
4 Moon M.S, Kim S.T, Kim Y.S, Chung W.J, "Improvement of Springback Predictability for Industrial Requirement", The Korean Society For Technology of Plasticity, pp. 58-66, 2013. Aug. 01.
5 Lee Hyung-chul, "Evaluation of the Springback Characteristics for Automotive Advanced High Strength Steel Sheet by V-bending Test" Chonnam National University
6 Kim Byung-gyu, "Study on the springback reduction of advanced high strength steel sheet for automotive panels", Hanyang University Graduate School