• Journal of Chest Surgery
• /
• v.34 no.11
• /
• pp.843-847
• /
• 2001

Background: Replacement of the esophagus remains a challenge for surgeons involved in esophageal disease. From 1996 to 1999, a total of 27 patients with esophageal cancer underwent free jejunal transfer(12cases) or esophagogastrostomy(15cases). To determine the results such as leakage of anastomosis site, stenosis, reflux esophagitis and operation time, respiratory complications, etc. we reviewed the 4 years experiences. Material and method: Palliative bypass surgery or esophageal prosthesis and cancers of the pharyngoesophageal or esophagogastric junction were excluded in this study. Resection was usually peformed through right thoracotomy and anastomosis was made with EEA staplers in esophagogas-trstomy. In cases of jejunal free transfer, 6cases of proximal esophagojejunostomy were stapled anastomosed and remaining 6 cases and all distal site were hand-sewn anastomosed. All reconstruction was done through posteromediastinal route. Result: There were two mortalities from thoracic esophagogastrostomy and one from jeunal free transfer. Major and minor complications(anastomosis site leakage: 3 cases, graft failure: 2cases etc) occurred in 27 cases. In 15 thoracic esophagogastrostomy cases, 11 patients had mild to moderate reflux esophagitis and 5 patients incurred stricture of the anastomosis. Operation time was about 550$\pm$280 minutes in jejunal free transfer, and about 300$\pm$ 160 minutes in esophagogastromy patients. Conclusion: Post operative reflux esophagitis and dysphagia were more frequent in Ivor-Lewis operation group than jejunal free transfer group; however, respiratory complications and operation time were significantly longer in jejunal (roe transfer group(p<0.05). To minimize the incidence of postoperative reflux esophagitis and dysphagia, patient evaluation focused on jejunal free transfer surgery is better than esophagogastrostomy followed by adequate post operative care.

• The KIPS Transactions:PartB
• /
• v.9B no.3
• /
• pp.375-382
• /
• 2002

Handwritten character recognition is classified into on-line handwritten character recognition and off-line handwritten character recognition. On-line handwritten character recognition has made a remarkable outcome compared to off-line hacdwritten character recognition. This method can acquire the dynamic written information such as the writing order and the position of a stroke by means of pen-based electronic input device such as a tablet board. On the contrary, Any dynamic information can not be acquired in off-line handwritten character recognition since there are extreme overlapping between consonants and vowels, and heavily noisy images between strokes, which change the recognition performance with the result of the preprocessing. This paper proposes a method that effectively extracts the stroke including dynamic information of characters for off-line Korean handwritten character recognition. First of all, this method makes improvement and binarization of input handwritten character image as preprocessing procedure using watershed algorithm. The next procedure is extraction of skeleton by using the transformed Lu and Wang's thinning: algorithm, and segment pixel array is extracted by abstracting the feature point of the characters. Then, the vectorization is executed with a maximum permission error method. In the case that a few strokes are bound in a segment, a segment pixel array is divided with two or more segment vectors. In order to reconstruct the extracted segment vector with a complete stroke, the directional component of the vector is mortified by using right-hand writing coordinate system. With combination of segment vectors which are adjacent and can be combined, the reconstruction of complete stroke is made out which is suitable for character recognition. As experimentation, it is verified that the proposed method is suitable for handwritten Korean character recognition.

• Journal of Korean Public Health Nursing
• /
• v.7 no.1
• /
• pp.67-79
• /
• 1993

This study was designed to identify the general health conditions and high risk factors of the male & female environmental workers. Thereby. the results of this study were to provide useful data as a contribution to knowledge for health protection and promotion. The data used for this study were environmental workers' physical examination cards; the male environmental workers were 52 persons. and the female environmental workers 52 persons. The data were analyzed by descriptive statistics, t-test, Pearson correlation, and distinction analysis, using the SPSS program. The results of this study can be summarized as follows; 1. Thers was a significant statistical difference between the two groups as to height. eyesight. serum GPT, hematocrit. The variables having little difference between two groups were weight. systolic blood pressure. total cholesterol. creatinine. 2. The rate of revealed in significant health examination was extra-health discrimination rate $28.8\%$, significant result of illness rate $12.5\%$. injury-inflicting rate $7\%$. second-time urine test $5.7\%$. antigen positive 3.8%. hearing impairment $2.8\%$, urine protein positive $1.9\%$. and urine sugar positive $1.9%$. 3. The workers diagnosed as extra-health discrimination were 30 persons or $28.8\%$. There was a difference between two groups on the prevalence. In the male environmental workers. ten times live problems and six times pulmonary tuberculosis and three times circulatory problems were revealed the higher than thoes of the female environmental workers. 4. In the male environmental workers, the relationship between age and systolic blood pressure revealed a significant correlation (r=0.22. p<0.05). In the female environmental workers. there was a negative correlation between age and weight (r= 0.25, p<0.05). the relationship between age and total cholesterol correlated positively (r=0.30, p<'0.05). 5. In the male environmental workers, there was a negative correlation between working career and creatinine(r=-0. 22, p<0.05) In the female environmental workers, there was a positive correlation between working career and total cholesterol (r= 0.58, p<0.01). 6. There were significant differences on working career and creatinine accdording to the male and female environmental workers who had any problems through x-ray inspection. 7. There were significant differences on height. eyesight. serum GPT according to the male and female environmental workers who were diagnosed as extra-health discrimination. 8. The female environmental workers who were diagnosed as 'care' were positively correlated with weight (r= 0.26. p<0.05)' and systolic blood pressure (r= 0.30. p<0. 05). on the other hand. the left and right eyesight correlated nagatively(r=-0.15. r=-0.33. p<0.01). 9. The most influential variables on the male and female environmental workers' health condition were working career, height. and weight. And these three variables could help determine the two groups at the level of 81. 8 percentage.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.917-924
• /
• 2015

In this study, we study that the video attributes captured by built-in camera in smart-phone can effect on the quality of PPG signal. The conditions of video attributes were composed of the bitrate, the resolution, the flash. As each condition, we measured a change in the red value of the video image and calculated a PPI(Pulse to Pulse Interval) for extracting the pulse wave signal. 20 subjects participated in the experiment and this experiment was carried out 18 tasks. The PPG signal was measured simultaneously for two minutes with the PPG sensor in the middle finger and Smart-phone in the forefinger of the right hand. By proceeding the correlation analysis, we obtained the highest correlation condition(83%, p=0.01), which the resolution was $640{\times}480$, bitrate was 5000kbps, flash was on. As a result, this study will be a useful guide for quality of signals in the pulse signal measurement system using built-in camera in smart-phone.

• Korean Security Journal
• /
• no.13
• /
• pp.235-258
• /
• 2007

Every crime involves a victim and an offender. The offender, from the start of the criminal investigation, is considered as a suspect. After prosecution, he/she becomes the accused, and under consitutional law and criminal procedural law, has the right to enforce the contests of the acts. On the other hand, the victim or his/her family, despite being the person harmed, has very few and comparatively weak rights. To overcome this problem, the Korean criminal justice has recently recognised 'the protection and support of the victim' as a major proposition, and the police as well as the prosecutor's office have been releasing improvement plans for the protection of victims. Setting the above as the background, this thesis deals with the current victim protection acts and discusses the methods to improve them. This study will investigate a more reasonable and effective method of victim support and protection. Currently korea's laws regarding victim protection are not satisfactory, however it is fitting to say that it is certainly an external outline of what it should be. This has been due to the enforcement and creation of 'criminal victim protection' and has acted as a key to more improvements ever since. Despite this, the lack of commitment in human and financial resources to enforce these laws has now produced a possibility of the laws proving to be nothing but an unopened letter. To prevent this from happening, the victim nothing but an unopened letter. To prevent this from happening, the victim protection related laws need to be revised to be more practical and secure. Despite this, the lack of commitment in human resources and financial resources to enforce these laws has now produced a possibility of the laws proving to be nothing but an unopened letter. To prevent this from happening, the victim nothing but an unopened letter. To prevent this from happening, the victim protection related laws need to be revised to be more practical and secure.

• Journal of Biosystems Engineering
• /
• v.13 no.3
• /
• pp.32-43
• /
• 1988

This study was attempted to investigate the pneumatic separation on separating unit of a combine harvester. The aerodynamic characteristics of threshed materials were analyzed by experiments. The air velocity distribution within the separation chamber was measured for various speeds of the winnower and suction fans to find out the operational and design conditions of the separating unit which would serve for reducing the grain loss from chaff outlet. The results of study arc summarized as follows: 1. Based on the separation curve of threshed materials analyzed, it was shown that three different kind. of materials-kernels, straw chaff, and leaf chaff were as a whole able to be separated pneumatically, regardless of varieties. However, a small amount of the separation grain loss may be expected to occur if the complete separation between kernels and straw chaff would be undertaken because some portion of their separation curve were overlapping. 2. The analysis of air velocity distribution showed that the separation chamber may be divided into two regions, the discharging and separating. The air velocity of the discharging region was 5-15 m/s and that of the separating region 2-5 m/s. 3. The air movement of the separation chamber may be a turbulence flow, being its speed became greater as it moves from the left to the right section of the separation chamber. The equi-speed line. of air flow had a steep gradient in between the discharging and the separation regions. The air velocity in the discharging region was much higher than the terminal velocity of kernels, because of which those kernels appearing in the region could be possibly exhausted as the grain loss from the chaff outlet. 4. The motion trajectory of threshed material in the separating region was dominantly affected by the winnower fan, on the other hand, its motion in the discharging region was affected by suction fan. 5. The grain loss from the chaff outlet was affected greatly by the winnower fan and the trace of kernel movement. It was observed that the optimum working speed to give minimum grain loss from chaff outlet for the combine tested should be maintained at 950~1,150 rpm for the winnower fan and 1,850 rpm for the suction fan. 6. It was shown that a large portion of grain loss from chaff outlet may occur when the kernels may bump against a portion of separation chamber wall and those kernels thus scattered into the discharging region were sucked by the suction fan. It was accordingly recommended that a new design of the wall of separation chamber so as to bump down kernels may be necessary to reduce grain loss from the chaff outlet.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.55-64
• /
• 2006

As digital systems were introduced to automotive design in the mid 1980s, the design process has adopted many digital programs to save time compared to the conventional hand drafting. Digital technology was introduced not only to satisfy the reeds of the global environment, as the number of automobiles exported to many different parts of the world has increased, but also to save time and effort in developing several models of quality automobiles. Therefore, every automotive manufacturer in the world has expanded its virtual reality(VR) studio to establish visualization systems that visualize automobiles in the actual size and a co-operation system that enables simultaneous feedback from all of its design studios around the world. Unlike the existing design reviewing methos, the new improved feedback system is assessed as a reasonable method to evaluates and understand how the automobiles are actually manufactured in simulation. It is especially helpful when advanced products and concept cars require fast results. Other strengths of the new system include shorter development period, cost efficiency, no more manual labor, various designs within a short period of time, and realistic visualization of concepts. Large-scale products, including automobiles, need to be projected in the actual size and high clarity through the Power-wall System and are examined in a virtual space called a Cave. Therefore, it took much time to establish digital infrastructure. An infrastructure would constantly require system improvement and performance enhancement, but it is certain that now is the right time for the take-off to utilizing the strengths of digital design and improve the weaknesses. In this respect, this study provided an understanding of the importance of digital design based on digital reinforcements and examined an effective utilization of digital technology for an efficient development of automobiles in the future.

• The Journal of Engineering Geology
• /
• v.13 no.3
• /
• pp.321-334
• /
• 2003

This study is aimed at the effective measurement plan of discontinuity orientation on rock mass. The discontinuity orientation is expressed as three methods. strike/dip. dipdirection/dip (a three digit number / a two digit number) and right hand rule. Generally, strike/dip is measured with clinometer. and dipdirection/dip with silva compass(type15). A sign of strike/dip. discontinuity orientation is used to geological survey. and dipdirection/dip to engineering. Dipdirection/dip converted by strike/dip measured with clinometer is useful on the statistical analysis of a lot of data. To measure the azimuth of the dip with clinometer and to change strike/dip to dipdirection/dip may have potential errors in each person. The newly designed apparatus, clinometer equipped by a rotational azimuth plate and an arrow to measuring strike and dipdirection, has been developed to measure effectively the discontinuity orientation with two method (strike/dip and dipdirection/dip). The measuring method of discontinuity orientation with clinometer having newly designed apparatus is effective one for accurate measurement of strike as well as dipdirection which is degrees counted clockwise from true north. Used by clinometer with newly designed apparatus, concurrent measuring strike/dip and dipdirecton/dip of discontinuity is possible. In application to measuring discontinuity orientation on rock slope, it has been recognized that the newly designed method, unambiguously, led to drop measuring errors comparing with existing measuring apparatuses. Therefore, it is considered that measuring method of discontinuity orientation (strike/dip and dipdirecton/dip) by the newly designed apparatus is useful to one in geological engineering investigation of road design, and to unskilled investigator.

• The Journal of Korean Orthopaedic Ultrasound Society
• /
• v.1 no.1
• /
• pp.1-5
• /
• 2008

Purpose: We studied the diagnostic value of dynamic US in the extensor tendon dislocation at the metacarpophalangeal joint. Materials and Methods: From January 2007 to October, we studied 6 cases that had been diagnosed and followed over 5 months (2-10) in average. US examination using a 10-MHz linear transducer were performed in three cases. The causes of dislocations were traumatic in 5 cases and congenital in one case. Results: In only 3 cases which could not be diagnosed clinically, we performed US. In dynamic US, all three cases showed the extensor tendon dislocation evidently. Operative findings were sagittal band rupture in 4 cases, capsular loosening in one case and sagittal band thinning in one case. Sagittal band repair was performed in 4 cases and capsular augmentation in one case. In case of congenital dislocation showing 4 digital extensor tendon dislocations in right hand, we operated only the second extensor by sagittal band repair with augmentation by looping. At last follow-up, no case showed recurrence or limitation of motion. Conclusion: In case of extensor tendon dislocation without apparent clinical finding, US with dynamic study has so great value that it can detect the dislocation in real time, which is superior to MRI.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.291-299
• /
• 2018

The purpose of this study was to review the government's policy on the enhancement of sports facilities for community residents regarding the lack of knowledge surrounding the infrastructure of sports facilities. The government has invested approximately 2.4 trillion won to establish 220 community sports centers, 385 billion won for 194 multi-purpose indoor centers, and 1.3 trillion won for rebuilding 1,870 school outdoor fields. On the other hand, there are problems with the link between the crumb rubber infill on sports fields and cancer, a lack of availability of indoor sports centers, and an increased federal budget deficit. It is the responsibility of government to plan and construct outdoor fields that are large enough to accommodate all people and allow them to play activities. In addition, the guidelines should ensure that the indoor space required for physical activities at each teaching station is large enough to accommodate all students in the class and handle two classes. The government should suggest the federal government guidelines based on a good understanding of the concept of infrastructure in sports facilities. The government also should make efforts to reduce the regulatory powers and provide the community with an autonomous right to plan and construct sports facilities.