• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.10
• /
• pp.999-1006
• /
• 2004

Recently, the ride comfort problem becomes increasingly important because of today's needs for train speedup. The railway has the track irregularities which cause vibrations, such as rail joints, turnout, level crossing, transition corves and super-elevation ramps, and variations in the track level(z-axis) and the gauge(y-axis). In Korea, the service run of the high speed train has been made since the 1st of April, 2004. The commercial high-speed trains must be run on the compound lines which are composed of high-speed line and conventional line. The high speed lines in both Kyoungbu line and Honam line have 57.5％ and 33.8％, respectively In this Paper, the ride comfort has been reviewed by the various experimental methods when the high-speed trains are operated on both Kyoungbu line and Honam line. The results show that the high-speed train has no problems from the viewpoint of the comfort ride during the operation on the high speed line and conventional line.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.2
• /
• pp.57-65
• /
• 2016

The suspension system of a subway vehicle is composed of $1^{st}$ and $2^{nd}$ springs. The suspension system is the most important parameter in determining the vibration ride comfort. If the $1^{st}$ suspension spring is designed as a spring with strong stiffness to improve the running stability at high speed, it causes vehicle vibrations. In this paper, by testing and analyzing changes of the characteristics of Chevron springs, which have been the primary suspension springs used for about 20 years, we study how changing the characteristics affects vehicle acceleration and ride comfort. The lateral and longitudinal vibrational ride comfort index levels were lower than the vertical ones. Therefore, as increasing the stiffness of Chevron springs has the greatest effect on the vertical vibrational ride comfort index level, a countermeasure for vertical vibration reduction is needed when the stiffness increases owing to aging. Finally, maintenance guidelines, including the replacement time for the Chevron rubber, were proposed based on these findings.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.332-338
• /
• 2004

The two projects about the high speed train have been performed in Korea, one project is the commercial run of high speed train(KTX) from Seoul to Busan and the other is the development of original high speed train(HSR 350x). As the successful results, the service run of KTX had been launched on the 1st of April, 2004 and HSR 350x had been fabricated in June, 2002 and has been tested in the Kyoungbu line and Honam line since then. The railway has the track irregularities which cause vibrations, such as rail joints, turnout, level crossing, transition curves and super-elevation ramps, and variations in the track level(z-axis) and the gauge(y-axis). Generally, the ride comfort for railway is evaluated by using the vibrations. In this paper, the ride comfort indices according to mc 513R and ISO 10056 have been reviewed when the high-speed trains are operated on both Kyoungbu line and Honam line. Also, the ride characteristics for KTX and HSR 350x on the high speed line and the conventional line have been analyzed and evaluated. The results show that the high-speed train has no problem from the viewpoint of the comfort ride on the high speed line and the conventional line and the ride index for HSR 350x is same as that for KTX in the high speed(300 km/h).

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.7 s.100
• /
• pp.859-864
• /
• 2005

Noise map is a presentation of existing data or predicted noise situation in terms of noise indicator. However, it has shortcoming for assessing the number of people exposed, or the number of dwellings affected to any relevant limit values of noise level in certain areas. In this study, so called over-ride value noise mapping is Proposed to make up for the shortcoming by using over-ride function of object-oriented programming and it is to show the guard of the area where it is satisfied the standard of option, or it is not satisfactory. Over-ride value noise map data is combined with topography layer, population and house statistics, and GIS space statistical analysis. The over-ride value noise mapping can also be applied to make the road traffic noise map, the railroad noise map, the aircraft noise map, and the industrial site noise map. This can express noise damage information more exactly.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.450-454
• /
• 2001

The aim of the study is to develope an objective index for the evaluation of vehicle ride comfort using the measured vehicle accelerations. The equation of the index was derived from the correlation analysis of subjective ratings on selected vehicles and the reduced measure of the vehicle motions. First whole procedure of from the measurements to the calculation of the perceptual vibration was developed. Test condition of both the vehicle speed and the road condition was selected so as to maximize the reliability of the index. This paper suggested the equation of the objective ride index on vibration harshness, of which expected error is about 0.3 in 10 scale of subjective rating at 95％ of the significance level.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1389-1396
• /
• 2008

There are many studies on the ride comfort for the train from the viewpoint of passenger. But there are only a few studies on the ride comfort for engineers in the locomotive. The railway has the track conditions, such as irregularities, rail joints, turnout, level crossing, transition curves and super-elevation ramps, which cause vibrations. Generally, the ride comfort for the train is evaluated by using the vibrations. In this study, vibration accelerations have been measured in the cabin rooms of locomotives, such as DL(Diesel-electric Locomotive), DHC(Diesel Hyduralic Car) and NEL(New-Electric Locomotive) when running on the Kyoungbu conventional line. And then, their ride comforts has been analyzed and evaluated by statistical method according to UIC 513R.

• The Journal of Korean Medicine
• /
• v.27 no.1 s.65
• /
• pp.36-46
• /
• 2006

Objectives : Ginseng Research Group in Korea Food Research Institute developed Saeng Mac San (KFRI-2)and Je Ho Tang (KFRI-3) with their sensory factors more acceptable. And we examined their effects on the short-term recovery capacity for cycling exercise (EX) maintained to all-out. Methods : Seven healthy young subjects (aged $24.0{\pm}2.1yr$) were volunteered at this double blind test. Each of KFRI-2, 3, a commercial sport beverage and control (CON) was offered randomly on a series of EX protocol including 65% VO2max-90min EX (D-ride). 1h-recovery and 85% VO2max EX to all-out (P-ride) under the control of their heart rate (HR) and rating perception of exertion (RPE). Blood samples were collected before D-ride, 30, 60 and 90min in D-ride, 30 and 60min in the recovery period and each 10min in P-ride. Plasma analysis items were glucose, insulin, cortisol (CORT), testosterone (TEST), free fatty acid (FFA), $Na^+$, Cl-and $K^+$. The collected data (Means${\pm}$SE) were analysed by two-way ANOVA and statistically significant differences between treatments (p<0.05) by LSD.; the significant level in FFA, $Na^+$, Cl-and $Na^+$ was p<0.01 Results : At 30min during recovery. plasma glucose level in KFRI-3 was significantly higher than CON, and also insulin in KFRI-3 was than CON and KFRI-2. FFA in KFRI-3 was significantly lower than CON during recovery. $Na^+$ in KFRI-3 significantly higher than CON at 90min in D-ride, and also KFRI-2 was at 60min during recovery. However CORT, TEST, Cl-and $Na^+$ in treated beverages were not significant. KFRI-2, 3 elevated the time for P-ride more than CON did. Conclusions : KFRI-2, 3 elevated the time for P-ride about 12% more than CON did. It is based on rapid recovery of plasma glucose level and inhibition of lipolysis during recovery.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.12
• /
• pp.133-140
• /
• 2013

Cascaded H-Bridge multi-level inverters can be implemented through the series connection of single-phase modular power bridges. In recent years, multi-level inverters are becoming increasingly popular for high power applications due to its improved harmonic profile and increased power ratings. This paper presents a control method for balancing the dc-link voltage and ride-through enhancement, a modified pulse width-modulation Compensation algorithm of cascaded H-bridge multi-level inverters. During an under-voltage protection mechanism, causing the system to shut down within a few milliseconds after a power interruption in the main input sources. When a power interruption occurs finish, if the system is a large inertia restarting the load a long time is required. This paper suggests modifications in the control algorithm in order to improve the sag ride-through performance of ac inverter. The new proposed strategy recommends maintaining the DC-link voltage constant at the nominal value during a sag period, experimental results are presented.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.272-277
• /
• 2007

Generally railway vehicle runs on the rail with endless interaction between wheel and rail. Irregularity of rail causes the periodic motion of the vehicle. In association with this motion, the design of vehicle would be carried out in order to avoid the resonance between car-body and bogie. It may be seen that the first vertical bending mode of car-body contributes considerably to the vertical ride comfort level. In this paper to know the effect of the car-body first vertical bending mode on vertical ride comfort, the mode has been considered with dynamic model. I-DEAS program was used to get the car-body first vertical bending mode and VAMPIRE program was used to analyze ride comfort index(Wz) with FE interface file.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.747-754
• /
• 2003

In this paper, a new evaluation system was developed for ride comfort test and vibration level test on railway vehicles. Combining two tests carried out by different test equipment seperately before, the developed system is capable of ride comfort test and vibration test by one system. Also, the assessment algorithm of ride comfort and vibration was compared and verified by simulation results with VAMPIRE software. With the developed system, the comfort in a passenger coach and the vibration in a freight car were evaluated through field test.