• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.7
• /
• pp.549-555
• /
• 2008

Analytical method to analyze the tolerance effect on the vehicle ride comfort is suggested in this paper. Ride comfort is one of the most important performance indices which decide the vehicle design quality. In general, the ride comfort is affected by the variations of parameters of a vehicle model. Therefore, the effects of the parameters on the ride comfort need to be evaluated statistically based on the whole-body vibration of the vehicle. In this paper, weighted RMS values of the acceleration PSD of a seat position are used to define the ride comfort. The equations of motion and the sensitivity equations are derived based on a 5-DOF vehicle model. By employing the sensitivity information of the acceleration at the seat position, the tolerance effect on the vehicle ride comfort could be effectively analyzed.

• Journal of Sensor Science and Technology
• /
• v.13 no.5
• /
• pp.369-377
• /
• 2004

Recently, the "ride comfort" problem becomes increasingly important because of today's needs for train speedup. The concept of term "ride comfort" is equivocal. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. But each of them recommends the different assessment method and the different guidance. In general, the evaluation methods defined in the standards, such as ISO 2631 and UIC 513R, and Ride Index suggested by Sperling, have been used in the railroad. But, only one or two methods of these can be evaluated by using the commercial ride comfort measuring system. Therefore, it is necessary to develop the new ride comfort measuring system for railway with multi-function. In this paper, the generalization of "ride comfort" and the design and verification of new ride comfort measuring system for railway with multi-function have been described and the application examples has been introduced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.365-368
• /
• 2005

The dynamic model was developed to analyze vibration acceleration and ride comfort during the operation of rubber-tired light rail vehicles. The ride comfort for standing passengers was analyzed in accordance with ISO 2631-1, UIC 513R, and CEN Draft prENV 12299 using this model. The result was applied to the detail design of Korean-standard, rubber-tired light rail vehicles, and the detail specifications related to ride comfort was determined based on this result. The ride comfort test was performed along the test track by using 2 car-train, and its result was compared with that of the ride comfort analysis, verifying the validity of the developed dynamic model. It was also verified whether or not the developed Korean-standardized, rubber-tired light rail vehicle met specified target specifications on ride comfort.

• Journal of the Ergonomics Society of Korea
• /
• v.26 no.1
• /
• pp.87-92
• /
• 2007

KTX (Korea Train eXpress) is launched as the $5^{th}$ develop a ride-comfort model for high-speed rail pasengers using structural equation model (SEM). Both qualitative and quantitative factors affecting ride-comfort were investigated, and employed to construct a comprehensive ride-comfort model. The SEM model was built with twenty measurement variables and seven latent variables for the evaluation of ride-comfort of high-speed train passenger. A total of six hundreds thirty two subjects participated in the evaluation using face-to-face survey method. As a result, the proposed SEM model model fitnes (GFI=0.93). According to the results, overall ride-comfort was significantly affected by the seat-, fatigue-, interior-related, and customer satisfaction variables such as fare. Among the engineering design variables of high-speed train, seat-related variables were identified as critical factors of the ride-comfort. It is expected that the result of this study could be useful for the enhancement of ride comfort in next generation KTX.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.4
• /
• pp.247-254
• /
• 2015

Ride comfort is one of the major factors in evaluating the performance of the vehicle. Tire is closely related to the ride comfort of the vehicle as the only parts in contact with the road surface directly. Vertical stiffness which is one of the parameters to evaluate the tire performance is great influence on the ride comfort. In general, the lower the vertical stiffness, the ride comfort is improved. Research for improving the ride comfort has been mainly carried out by optimizing the shape of the pneumatic tire. However, demand for safety of the vehicle has been increased recently such as a run-flat tire which is effective in safety improvement. But a run-flat tire have trouble in practical use because of poor ride comfort than general tire. Therefore, In this paper, the research was carried out for improving the ride comfort through the optimization of the SIR shape inside a run-flat tire. Meta-model was generated by using the design of experiment and it was able to reduce the time for the finite element analysis of optimization. In addition, Shape optimization for improving the ride comfort was performed by using the genetic algorithm which is one of the global optimization techniques.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.12
• /
• pp.1217-1223
• /
• 2008

Vehicle vibration mostly originates from the road excitation and causes discomfort, fatigue and even injury to a driver. Vehicle ride comfort is one of the most important performance indices to achieve a high-quality vehicle design. Since design parameter variations inevitably result in the vehicle ride comfort variance, the variance characteristics should be analyzed in the early design stage of the vehicle. The vehicle ride comfort is often defined by an index which employs a weighted RMS value of the acceleration PSD of a seat position. The design solution is obtained through two steps in this study. An optimization problem to obtain a minimum ride comfort index is solved first. Then another optimization problem to obtain minimum variance of the ride comfort index is solved. For the optimization problems, the equations of motion and the sensitivity equations are derived basing on a 5-DOF vehicle model. The numerical results show that an optimal solution for the minimum ride comfort is not necessarily same as that of the minimum variance of the ride comfort.

• Proceedings of the KSR Conference
• /
• 2003.10a
• /
• pp.131-137
• /
• 2003

In this paper, we introduce the characteristics of ride comfort for KTX(Korea Train express) and HSR 350(Korea High Speed Train project). The concept of term "ride comfort" is equivocal. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. In the case of KTX, the ride comfort has been evaluated according to ISO 2631 standard. But the ride comfort for HSR 350 has been assessed by UIC 513R. We have reviewed the ride comfort for KTX and HSR 350 by same method, such as ISO 2631 and UIC 513R, and compared the result of KTX with that of HSR 350.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.549-554
• /
• 2003

Recently, the ride comfort problem becomes increasingly important because of today's needs for train speedup. The concept of ride comfort is equivocal. Generally, it is defined as the body vibration. The prototype of Korean high speed train (KHST), composed of two power cars, two motorized cars and three trailer cars, has been designed, fabricated and tested by the domestic researchers. In this paper, the ride comfort has been reviewed by the experimental method. The on-line test of KHST has been carried out up to 260km/h in the KTX line and proved that KHST has no problems from the viewpoint of the comfort ride at this speed. And the ride index lot KHST has been predicted at 300km/h and 350km/h by fitting curve.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.10a
• /
• pp.108-113
• /
• 1997

In these days, customers require high-quality, high-performance, high-ride comfort for Automobile and then the automotive manufacturers concentrated on study of electrical, high-performance, low-cost of parts and sub-parts. In this paper, for ride comfort estimation PSD(Power Spectral Density) of acceleration at eight test point are measured, and then are calculated with new index of ride comfort. The new index of ride comfort developed for optimal design, real test, applied the actual. It can apply for various fields.

• Proceedings of the KSR Conference
• /
• 2003.10a
• /
• pp.167-174
• /
• 2003

Recently, the "ride comfort" problem becomes increasingly important because of today′s needs for train speedup. The concept of term "ride comfort" is equivocal. Generally it is defined as the vehicle vibration. There are many studies on evaluation method of ride comfort for railway. But each of them recommends the different assessment method and the different guidance. So users must review whether they can apply it to their system or not. In general, the evaluation methods defined in the standards - ISO 2631, UIC 513 R, and Ride Index suggested by Sporting - have been used in the railroad. The ride comfort measuring system according to the previous mentioned evaluation methods "ride comfort" has developed, verified and utilized in the railways.