• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.558-560
• /
• 2019

범용 인버터는 계통 전원의 전압 강하 또는 정전 발생 시, 정류기의 직류단 전압이 감소하여 인버터 고장(fault)이 발생한다. 보호 동작으로서 인버터는 일시적으로 전원 공급이 이루어 지지 않는 상태에서 제어 기능 및 관리가 이루어 질 수 있도록 Ride-Through 운전을 수행한다. 고장 발생 없이 제어 시스템 상태를 유지하여 전원 복구 후, 빠른 재기동이 가능하다. 본 논문에서 V/f 제어를 사용하는 범용 인버터를 고려한 Ride-Through 방법으로 KEB(Kinetic Energy Backup) 운전을 제안한다. KEB 운전은 순시 정전에 의한 인버터 고장 방지를 위해 요구되는 에너지를 계산하고 슬립 주파수를 조절하여 회생 운전을 통해 인버터의 직류단 전압을 일정하게 유지한다. 제안한 방법은 실험을 통해 유효성을 검증한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.1
• /
• pp.205-213
• /
• 1997

In this study, dynamic analysis of a passenger car is carried out to analyze ride quality over a random road profile. The front suspension of the car is a MacPherson strut type and the rear suspension is a multi- link type. The following five different models are constructed and compared to see the effects of engine vibration and chassis flexibility in the ride quality. (1) one rigid chassis model, (2) a rigid chassis and rigid engine model, (3) a rigid engine and flexible chassis model with one vibration mode, (4) one flexible chassis model with six engine vibration modes and one chassis vibration mode, (5) one flexible chassis model with seven vibration modes and four static correction modes. The result shows that engine vibration modes and the first bending mode of the chassis are important in the ride quality.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.679-680
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.993-994
• /
• 2008

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.7
• /
• pp.937-943
• /
• 2013

An independently driven electric corner module cannot be applied to an actual vehicle without some difficulty, because of vehicle safety problems in the case of malfunctions and degraded ride and handling performance owing to the increase in the unsprung mass. In this study, a simulator is developed to evaluate the vehicle driving performance in order to solve ride and handling problems. Component modeling of a small-sized electric vehicle with an independently driven electric corner module is performed using MATLAB/Simulink. The vehicle is modeled by using CarSim, which can be used to analyze the vehicle maneuvers with 27 DOFs. The control algorithm for the improvement of vehicle driving safety and ride and handling performance is validated by using the developed simulator.

• Journal of the Korean association of regional geographers
• /
• v.14 no.6
• /
• pp.718-735
• /
• 2008

Park-and- Rides are intermodal transfer facilities providing a staging location for travellers to transfer between transportation modes. They are an alternative to alleviate transportation problems such as traffic congestion and air pollution in metropolitan areas. Siting Park-and-Ride facilities belongs to a kind of multi-criteria spatial decision making problems being associated with a combination of various location factors. The purpose of this paper is to provide a method and procedure to evaluate the location suitability of Park-and-Ride facilities using GIS(Geographic Information Systems). Using GIS-based suitability analysis, land value, landuse, road accessibility, public transportation accessibility, possibility to intercept automobile trips, distance to activity center and competition with existing facilities were evaluated as location factors. The suitabilities of individual factors were combined to produce a composite map with a specific weight scheme. Then a given number of sites with high suitability score were selected as potential facility locations and their demand were evaluated based on a commutershed with parabolic shape. The suggested method and procedure will provide useful information in determining Park-and-Ride sites and designing their structure.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.17 no.4
• /
• pp.1-9
• /
• 2009

A simplified model of seat-human body is presented to analyze vibrations of human body on a seat of vehicle. The theoretical model having seven degrees-of-freedom is composed of the inter-connected masses, springs and dampers. Until now, evaluation of ride comfort has been usually performed only through vehicle tests. This study aims to complement shortcomings of conventional vehicle tests in evaluation of ride comfort by using the theoretical model. The acceleration values of the human body are obtained from frequency response functions of the theoretical model. Thereafter, Ride and SEAT indexes are acquired by considering response characteristics of the human body for the 12 axes that are presented in BS 6841. A vehicle test is carried out to measure the acceleration values for the three parts of the human body such as upper body, hip and foot. Ride and SEAT indexes of the vehicle test are also obtained by considering the response characteristics of the human body, of which results are compared with the values from the theoretical model. It is found that the theoretical results are in good agreement with the experimental results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.4
• /
• pp.341-346
• /
• 2011

In the development of high-speed trains, ride comfort is an important factor that determines the quality of the train. In this study, the ride comforts of high-speed trains with rigid and flexible car bodies were evaluated. The rail irregularity is used as an exciting source of the car-body bounce motion. The complex extruded structures of the car-body are modeled as shell structures using the calculated equivalent stiffness of the flexible model. The numerical results show that the ride of the rigid-body model improves as the speed increases, which is unreasonable. In contrast, the relationship between ride comfort and speed in the case of flexible-body model is reasonable. Thus, it is confirmed that the flexibility of the car body needs to be taken into consideration while fabricating a high-speed train.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.216-224
• /
• 2020

This paper proposes an impedance design method of the test device for evaluating Low Voltage Ride Through(LVRT) and High Voltage Ride Through(HVRT) functions. The LVRT/HVRT test device should have ability to generate the fault voltage specified in the grid code for a certain period and to limit the magnitude of the fault current with the design specification. In this paper, the impedance design method for auto transformer is proposed based on a equivalent model of a tap-change auto-transformer during LVRT/HVRT operation. In addition, to generate various fault voltages required the LVRT/HVRT test, tap impedance design in the auto transformer is considered. To verify the validity of the proposed design method, the design process of the 10MVA LVRT/HVRT test device was conducted and the design results was verified through simulation models.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.1
• /
• pp.237-250
• /
• 2011

The train transportation has a lot of advantages-energy efficiency is high, it is eco-friendly, safety is better than normal roads and it is possible for people to arrive on time. In these days, the valuation of ride comfort, which is only limited to road transportation, is newly recognized in order to having competitiveness from other transportation. Especially, in the development of the Korean high-speed railroad business, the ride comfort enhancement of train is very important problem to be solved. Currently, there are international standards of ride comfort such as UIC13, ISO2631. In Korea case, although it has own standard like KS R9216, it mainly depends on the physical parameter such as vibration and noise. So recently, in the valuation of ride comfort, the movements of living parameter technique introduction are increasing on the base of Japan and many developed countries of Europe techniques. Presently, the method of train ride comfort is mainly based of vibration, that is, mechanical parameter adding selection of variable acceleration and noise. This paper would like to show biological parameter; heart rate and blood pressure variation. This method is more direct, based on human body response, than mechanical parameter method. In this experiment, the variability of heart rate and blood pressure of passengers according to tilting angle change of Train, the Korean tilting train, we are supposed to know that the extent of tilting on the simulation has influence on variability of heart rate and blood pressure, which are living parameter of heart's blood.