• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.495-500
• /
• 2006

The physicochemical properties of brown rice flours produced under different drying and milling conditions were investigated. Moisture contents of hot-air dried, microwave dried and zet-milled brown rice flours (BrWZH) were 10.7%,13.7% and 8.0%-8.6%, respectively. Water absorption indices (WAI) and water soluble indices (WSI) of roll-milled brown rice flours (BrWRH) were lower (0.40-0.59 g/g; 0.7-3.0%) than those of zet-milled brown rice flours (0.58-0.79 g/g; 4.0-7.3%). Zet-milled brown rice flours had higher Hunter L values and more damaged starch (94.1-96.8; 28.2%) compared to roll-milled brown rice flours (91.3-91.9: 15.5%). The percentage of damaged starch and L values of brown rice flours increased as particle size of brown rice flours decreased. Roll-milled polished rice flour (Control) had the highest L value and lowest amount of damaged starch (97.1; 8.2%). Control, BrWRH, BrWZH, and ultrafine brown rice flour (HBrZMU) had peak viscosity values of 321, 255, 221, and 162 RVU, respectively and trough viscosity values of 217, 185, 175, and 113 RVU, respectively. Peak and trough viscosity (Rapid Visco Analyzer; RVA) properties of rice floors decreased as the particle size of rice flours decreased. HBrZMU demonstrated a higher onset temperature $(61.1^{\circ}C)$ compared to control $(54.8^{\circ}C)$ by differential scanning calorimetric (DSC). Crystal melting enthalpy $({\Delta}H)$ of control and brown rice flours were 10.4 J/g and 6.1-8.7 J/g, respectively. Results of this study suggested that physicochemical properties of brown rice flours were closely related to their particle size.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.10-10
• /
• 2022

The concern about food security is rising as the unstable situation of food supply and demand due to the Covid-19 pandemic, climate change, and turbulent political situation. Korea's global food security index (GFSI), analyzed by the Economist Group, is considered good, but the level continuously decreases in comparing food security levels by country. In particular, Korea is highly dependent on food imports, and food and grain self-sufficiency rates continuously decrease. Therefore, increasing those rates to strengthen food security is urgent. Among the major grains, the self-sufficiency of wheat, com, and soybeans, except rice, is relatively low. Unlike the decrease in the annual rice consumption, the annual wheat consumption has been continuously maintained or increased, which is required public-private efforts to increase the self-sufficiency rate of wheat. Applying the government's policies implemented to increase the self-sufficiency rate of rice in the past will help increase the self-sufficiency rate of wheat. In other words, expanding wheat production and infrastructure, stabilizing supply and demand, and establishing a distribution system can be applied. However, the processing capability of wheat and rice is different, which is necessary to improve wheat quality and processing technology to produce consumer-preferred wheat-based products. The wheat and flour quality can be improved through breeding, cultivation, post-harvest management, and milling. In addition, research on formulation, processes, packaging, and storage to improve the quality of wheat-based products should be done continuously. Overall, food security could be strengthened by expanding wheat production and consumption, improving wheat quality, and increasing wheat self-sufficiency.

• Journal of Applied Biological Chemistry
• /
• v.62 no.3
• /
• pp.219-228
• /
• 2019

This study summarized processing factor (PF) by the stage of rice and barley processing based on JMPR reports from 2006 to 2016. We compared PF of 17 pesticides in rice products during the processing of rice grain, husked rice, polished rice, hulls, bran and cooked rice. Among the 17 pesticides, 12 pesticides except for 5 pesticides such as acephate, methamidophos, glufosinate, quinclorac and sulfoxaflor mostly decreased in pesticides when rice grain processed into brown rice. Pesticides tended to be partially reduced when processed from husked rice to polished rice. However, hulls and bran produced during the milling process were concentrated. Acephate and others, 5 pesticides are systemic pesticides, and pesticides are penetrated into foods, and a large amount of pesticides was not removed during the milling process. The remaining pesticide residues in polished rice were mostly removed after processing into cooked rice, and trace amounts of pesticide residues remained. In the comparison of 23 pesticides PF during the processing of barley products (pearl barley, flour, short, malt, beer, hulls and bran). Most of the pesticide except for 4 pesticide (ethephon, pyraclostrobin, penthiopyrad, sulfoxaflor), which are systemic pesticides, decreased during the process of pearl barley production out of the barley grain. The pesticide in the malt, which was made by steeping pearl barley was concentrated but when processed into beer, pesticide was remained only in trace amounts.

• Korean Journal of Food Science and Technology
• /
• v.48 no.5
• /
• pp.492-495
• /
• 2016

This study aimed at investigating the influence of different rice varieties (Palbangmi, Saegoami, Mimyeon, Dasan-1, Hanarm, Boramchan, and Baegjinju) on the preparation process of rice cookies. Rice grains were pulverized by dry milling and subsequently screened using a 100-mesh sieve. Dasan-1, Hanarm, and Palbangmi flours showed low water absorption index (WAI) compared to other rice flours. The spread ratios of the cookies prepared with Dasan-1, Hanarm, and Palbangmi flours reached higher values than those obtained with other rice varieties. As a result, the hardness of the cookies prepared with Dasan-1, Hanarm, and Palbangmi flours was relatively low. On the contrary, cookies prepared with Saegoami, Boramchan, and Baegjinju flours showed inadequate qualities because they contained relatively high levels of damaged starch, which increased water absorption in the cookie dough. The WAI value of rice flour could be the most important indicator to determine the quality of rice cookies.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.3
• /
• pp.283-291
• /
• 2013

Rice varieties with suitable flour-making quality are required to promote rice processed-food industry and boost rice consumption in Korea. 'Namil (SA)-flo1' is an advanced mutant line with floury endosperm which shows good flour-making quality under dry-milling process. Genetic analysis was carried out to localize the chromosomal region responsible for the floury endosperm of 'Namil (SA)- flo1'. By using 94 F2 progenies, which were derived from 'Namil (SA)-flo1' ${\times}$ 'Milyang 23', floury grains percentage was investigated as phenotypic data, and genotyping was conducted with 54 SSR markers. Association analysis showed that the target genetic region for floury endosperm is on middle-low region of chromosome 5. Through further association analysis with increased number of SSR markers on chromosome 5, we found that genotypic variation in RM164 explains 79.7% of the variation in floury grains percentage of F2:3 seeds. The floury endosperm locus was localized on 17.7-20.7 Mbp region of chromosome 5 and will be further analyzed for fine mapping and gene identification.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.1
• /
• pp.9-16
• /
• 2022

Rice is one of the most important staple foods in Wnju, Jeonbuk, South Korea. However, rice consumption has dramatically decreased as eating habits have diversified owing to rapid economic growth. Recently, floury endosperm rice varieties have been developed to invigorate the rice processing industry, because dry-milled rice flour is economically and environmentally suitable for massive rice flour distribution. The National Institute of Crop Science has developed 'AromaT', an early-maturing black rice with floury-endosperm, suitable for tea and dry milling. 'AromaT' was derived from a cross between 'Suweon542' as the floury endosperm source and 'Heugjinju' as the black and aromatic source. In this study, 'AromaT' and its parents, 'Suweon542' and 'Heugjinju', were analyzed for agronomic traits, anthocyanin content, and their major physicochemical properties by different planting date. The field experiment was conducted in Wanju, Jeollabuk-do Province, South Korea, in 2019. The transplanting dates were May 30 (ordinary season), June 25 (double-cropping season), and July 10 (late season). The yield performance of brown rice 'AromaT' was 330 kg/10 a in the double-cropping cultivation method and was the highest among the transplanting dates. The floury endosperm of 'AromaT' was derived from 'Suweon542' containing 'flo7', located on chromosome 5 and known to control floury endosperm. With the late planting date, the anthocyanin content of 'AromaT' was 570.5 mg/100 g, much higher than that of 'Heugjinju' (376.3 mg/100 mg). The brown rice of 'AromaT' also exhibited the pop-corn-flavoring 2-acetyl-1-pyrroline, exclusively detected in aroma rice varieties. The average particle sizes of 'AromaT' and 'Suweon542' were 67.12 ㎛ and 70.9 ㎛, respectively, lower than that of 'Heugjinju' (95.5 ㎛) with a black transparent endosperm. The average damaged starch content of 'AromaT' was 8.1%, lower than that of 'Heugjinju' (10.05%) and Suweon542 (9.5%). As a result, 'AromaT' with high anthocyanin content, fine particle size, and low damaged starch content is expected to provide a new rice material in various processing fields.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.1
• /
• pp.15-26
• /
• 1994

To understand the relative contribution of varietal and environmental variation on various grain quality components in rice, grain appearance, milling recovery, several physicochemical properties of rice grain and texture or palatability of cooked rice for milled rice materials of seven cultivars(five japonica & two Tongil-type), produced at six locations of the middle and southern plain area of Korea in 1989, were evaluated and analyzed the obtained data. Highly significant varietal variations were detected in all grain quality components of the rice materials and marked locational variations with about 14-54% portion of total variation were recognized in grain appearance, milling recovery, alkali digestibility, protein content, K /Mg ratio, gelatinization temperature, breakdown and setback viscosities. Variations of variety x location interaction were especially large in overall palatability score of cooked rice and consistency or set- back viscosities of amylograph. Tongil-type cultivars showed poor marketing quality, lower milling recovery, slightly lower alkali digestibility and amylose content, a little higher protein content and K /Mg ratio, relatively higher peak, breakdown and consistency viscosities, significantly lower setback viscosity, and more undesirable palatability of cooked rice compared with japonica rices. The japonica rice varieties possessing good palatability of cooked rice were slightly low in protein content and a little high in K /Mg ratio and stickiness /hardness ratio of cooked rice. Rice 1000-kernel weight was significantly heavier in rice materials produced in Iri lowland compared with other locations. Milling recovery from rough to brown rice and ripening quality were lowest in Milyang late-planted rice while highest in Iri lowland and Gyehwa reclaimed-land rice. Amylose content of milled rice was about 1% lower in Gyehwa rice compared with other locations. Protein content of polished rice was about 1% lower in rice materials of middle plain area than those of southern plain regions. K/Mg ratio of milled rice was lowest in Iri rice while highest in Milyang rice. Alkali digestibility was highest in Milyang rice while lowest in Honam plain rice, but the temperature of gelatinization initiation of rice flour in amylograph was lowest in Suwon and Iri rices while highest in Milyang rice. Breakdown viscosity was lowest in Milyang rice and next lower in Ichon lowland rice while highest in Gyehwa and Iri rices, and setback viscosity was the contrary tendency. The stickiness/hardness ratio of cooked rice was slightly lower in southern-plain rices than in middle-plain ones, and the palatability of cooked rice was best in Namyang reclaimed-land rice and next better with the order of Suwon$\geq$Iri$\geq$Ichon$\geq$Gyehwa$\geq$Milyang rices. The rice materials can be classified genotypically into two ecotypes of japonica and Tongil-type rice groups, and environmentally into three regions of Milyang, middle and Honam lowland by the distribution on the plane of 1st and 2nd principal components contracted from eleven grain quality properties closely associated with palatability of cooked rice by principal component analysis.

• Korean Journal of Food Science and Technology
• /
• v.22 no.6
• /
• pp.603-610
• /
• 1990

The structural properties of cold water extractable ${\alpha}-D-glucan$ in rice flours obtained by various milling methods were investigated. The blue value, ${\lambda}_{max}$ values of the iodine complex and ${\beta}-amylolysis$ limit of the cold water extractable ${\alpha}-D-glucan$ were in the range of $0.026{\sim}0.030,\;518{\sim}522\;nm$ and $52.7{\sim}59.6%$, respectively, indicating these materials were composed mainly of amylopectin-like polymer. The gel chromatography on Sepharose CL-2B indicated that the cold water extractable ${\alpha}-D-glucan$ had lower molecular weight but wider molecular weight distribution than that of the original rice amylopectin. The Sephadex G-50 gel chromatography showed that the unit chain distribution of cold water extratable ${\alpha}-D-glucan$ after debranching with pullulanase was similar to that of rice amylopectin. And the ion chromatography of the distribution pattern of the chain length below D.P.30 in the debranched ${\alpha}-D-glucan$ indicated only blade-milled flour was similar to the amylopectin, but in the amount of unit chain below D.P.10, all the ${\alpha}-D-glucan$ in rice flours was higher than that of amylopectin.

• Journal of Biomedical and Translational Research
• /
• v.19 no.4
• /
• pp.103-109
• /
• 2018

Aspergillus luchuensis 34-1 was inoculated into wheat pellets with different conditions of raw materials to produce nuruk. The degree of substrate reactivity improvement of steam treated raw materials compared with that of non-heat treated was analyzed. The water content of the pellet was adjusted to 25% and 35%, and steam treatment for 10 minutes improved the substrate reactivity at 2.1-fold and 3.1-fold, and sterilization was also possible. The characteristics of improvement pellet nuruk were investigated according to the degree of crushing and water content of raw materials according to the temperatures and humidities ($23^{\circ}C$, $30^{\circ}C$ and RH 60%, RH 80%). The pH of the pellet nuruk was higher depending on the temperature, humidity and moisture content of the koji were lower, and the pH of the flour-pellet nuruk was lower than that of 2 mm milling wheat-pellet nuruk according to milling degree. It can be seen that the milling degree affects the growth of mold. The acidity and amino acid were generally higher as fermentation time increased. Also, the higher the incubation temperature, humidity and moisture content, the higher the value. Glucoamylase activity was significantly the highest in moisture content 35% D2b nuruk, cultured at $30^{\circ}C$ and 80% RH for 38 hours. This is higher than the previous reports on glucoamylase of rice-koji or commercial nuruk using fungi isolated from traditional nuruk. From these study, it is expected that making of improvement pellet nuruk would save the fermentation time considerably compared with traditional nuruks.

• Korean Journal of Food Science and Technology
• /
• v.51 no.2
• /
• pp.127-132
• /
• 2019

This study investigated the quality of Jeungpyun based on variety, milling method and fermentation time. Rice flour (wet-milled Samkwang and dry-milled Seolgaeng) was used for these experiments. The expansion ratios of wet-milled Samkwang and dry-milled Seolgaeng after 6 h of fermentation showed similar values of 160.66 and 159.52%, respectively, while the specific volume was found to be 1.12 mL/g for both. Hardness values of 475.57 g in dry-milled Seolgaeng and 550.40 g in wet-milled Samkwang were determined to be the lowest values after 6 h of fermentation. Numerous pores were found in wet-milled Samkwang, whereas large-sized pores were found in dry-milled Seolgaeng. Thus, these results show no significant difference between the quality of Jeungpyun produced using dry-milled Seolgaeng or wet-milled Samkwang rice flours. However, dry- milled Seolgaeng without the wet-milled process is considered more suitable for Jeungpyun production.