• 한국해양공학회지
• /
• 제31권6호
• /
• pp.425-430
• /
• 2017

In order to reduce the cost of corrections and time needed for the block assembly process, the reverse setting method is applied for a back-heated block to neutralize deck deformation. The proper reverse setting shape for a back-heated block to correct deformation improved the deck flatness, but an excessive amount of reverse setting could inversely affect the flatness of the block. A prediction method was developed for the proper reverse setting shape using a back-heated block, considering the complex geometry of blocks, thickness of the deck plate, and thermal loading conditions such as welding and back-heating. The prediction method was developed by combining the re-meshing technique and inherent strain-based deformation analysis using the finite element method. Because the flatness deviation was decreased until the lower critical point and thereafter it tended to increase again, the optimum value for which the flatness was the best case was selected by repeatedly calculating the predefined reverse setting values. Based on this analysis and the study of the back-heating deformation of large assembly blocks, including the reverse setting shape, the mechanism for selecting the optimum reverse setting value was identified. The developed method was applied to the actual blocks of a ship, and it was confirmed that the flatness of the block was improved. It is concluded that the developed prediction method can be used to predict the optimum reverse setting shape value of a ship's block, which will reduce the cost of corrections in the construction stage.

• Restorative Dentistry and Endodontics
• /
• 제24권4호
• /
• pp.578-584
• /
• 1999

The purpose of this experiment was to determine: (1) the safe automatic apical reverse setting that prevents overinstrumentation of the root canal, using Tri Auto ZX$^{(R)}$ and (2) the effect of various irrigant on such instrumentation. The instrumentation was carried out with the automatic apical reverse setting of 0.5, 1.0, 1.5, and 2.0. The root canal irrigants used in usual manner were normal saline(0.9%), NaOCl(2.5%), and RC Prep$^{(R)}$. For each reverse setting and each irrigant, ten teeth were used with the total of 120 teeth. The distance between the file tip and the apical constriction was determined by stereomicroscope using the point that the file began to rotate in reverse direction. When the reverse setting mode was set to 0.5, 18 of 30 were overinstrumented. If these were discriminated by irrigant, 10 of 6 with 0.9% saline, 10 of 6 with NaOCl, and 10 of 6 with RC Prep$^{(R)}$ has the file tip located 0.57${\pm}$0.30mm, 0.73${\pm}$0.39mm, and 0.26${\pm}$0.25mm beyond the apical constriction respectively. In 1.0 setting 15 of 29 were over the apical constriction, and the distribution was 6 in saline, 5 in NaOCl, and 4 in RC Prep$^{(R)}$. The mean distance over the apical constriction was 0.28${\pm}$0.13mm with saline, 0.75${\pm}$0.61mm with NaOCl, and 0.25${\pm}$0.17mm with RC Prep$^{(R)}$. When the autoatic reverse mode was set to 1.5, and 2.0, 5, and 1 teeth were found to be overinstrumented in respective settings. But there were large variations in overinstrumented distances when an attempt was made to compare the effect of irrigants on this overinstrumentations and they were meaningless for the small sample size. When all of the autoreverse setting were combined to compare the number of overinstrumented teeth with each irrigant, there were no significant differences (14 for normal saline, 12 for NaOCl, 13 for RC Prep$^{(R)}$). When 0.5 or 1.0 automatic apical reverse setting mode was used the Tri Auto ZX$^{(R)}$ in clinical application, the possibility of overinstrumentation beyond the apical constriction exists in 55.9% of cases. Therefore 1.5 or 2.0 setting is safer for the preparation inside the canal but this type setting needs additional apical hand preparation of the root canal because the accuracy is lower than 0.5 or 1.0 setting.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.129-131
• /
• 2006

This paper presents a new ZVS-PWM high frequency inverter. The ZVS operation is achieved in the whole load range by using a simple auxiliary reverse blocking switch in parallel with series resonant capacitor. The operating principle and the operating characteristics of the new high frequency circuit treated here are illustrated and evaluated on the basis of simulation results. It was examined that the complete soft switching operation can be achieved even for low power setting ranges by introducing the high frequency dual duty cycle control scheme. In the proposed high frequency inverter treated here, the dual mode pulse modulation control strategy of the asymmetrical PWM in the higher power setting ranges and the lower power setting ones, the output power of this high frequency inverter could introduce in order to extend soft switching operation ranges. Dual duty cycle is used to provide a wide range of output power regulation that is important in many high frequency inverter applications. It is more suitable for induction heating applications the operation and control principle of the proposed high frequency inverter are described and verified through simulated results.

• 전기학회논문지P
• /
• 제66권1호
• /
• pp.15-20
• /
• 2017

In order to advance and improve the performance of domestic aged power plants, IEDs have been developed for power generation systems. For smooth installation and operation of the protection relays, a detail settings study of IED is required. This paper deals with an analysis based on PSCAD and setting investigation of IED for loss of field, reverse power protection in Small Hydro Generation System.

• Journal of Power Electronics
• /
• 제7권2호
• /
• pp.118-123
• /
• 2007

This paper presents a new ZCS-PWM high frequency inverter. Zero current switching operation is achieved in the whole load range by using a simple auxiliary reverse blocking switch in parallel with series resonant capacitor. Dual duty cycle control scheme is used to provide a wide range of high frequency AC output power regulation that is important in many high frequency inverter applications. It found that a complete soft switching operation can be achieved even for low power setting ranges by introducing high-frequency dual duty cycle control scheme. The proposed high frequency inverter is more suitable for consumer induction heating(IH) applications. The operation and control principle of the proposed high frequency inverter are described and verified through simulated results.

• 터널과지하공간
• /
• 제26권4호
• /
• pp.253-265
• /
• 2016

본 연구에서는 reverse RFID 시스템을 이용하여 지하광산 현장에 투입되는 장비들의 이동시간을 측정하였다. Reverse RFID 시스템에서는 리더기와 안테나가 광산 장비에 탑재되며 태그는 지하광산의 갱도에 부착된다. 실내 모사실험을 통해 장비에 설치되는 RFID 리더기의 송출 전력 크기에 따라 상이하게 나타나는 태그 인식범위와 태그 인식률의 변화를 파악하였다. 그 결과 리더기의 송출 전력 크기가 작아질수록 태그 인식 범위가 좁아져 정밀한 이동시간 측정이 가능해졌으나, 태그 인식률은 떨어지는 것을 확인할 수 있었다. 현장실험 결과 본 연구에서 사용한 RFID 장비의 경우 송출 전력을 28 dBm으로 설정하는 것이 태그의 인식률을 유지하면서 측정오차를 줄일 수 있는 것으로 나타났다. 또한, 현장 실험 결과를 통해 reverse RFID 시스템이 지하광산에서 운반 트럭의 이동시간 측정자료 수집을 위해 성공적으로 사용될 수 있음을 확인할 수 있었다.

• Industrial Engineering and Management Systems
• /
• 제13권4호
• /
• pp.383-397
• /
• 2014

Reverse logistics network design issues have been popularly discussed in recent years. However, few papers in the past literature have been dedicated to incentive effect on return quantity of used products. The purpose of this study is to formulate a dynamic nonlinear programming model of reverse logistics network design with the aim of managing the used products allocation by coordinating the collection centers and recovery facilities to warrant economic efficiency. In the optimization model, a fuzzy approach is applied to interpret the relationship between the rate of return and the suggested incentives. Due to funding constraints in setting up the collection centers, this work considers these centers as multi-capacity levels, which can be opened or closed at different periods. In view of the fact that the problem is known as NP-hard, we propose a heuristic method based on tabu search procedure to solve the presented model. Finally, several dominance properties of optimal solutions are demonstrated in comparison with the results of a state-of-the-art commercial solver.

• 대한치과교정학회지
• /
• 제52권5호
• /
• pp.372-382
• /
• 2022

Anterior open bite and transverse discrepancy are often accompanied by hyperdivergent skeletal patterns. In addition, degenerative joint disorders and vertical maxillary excess contribute to an unfavorable convex facial profile with a retruded chin. Correction of this complex three-dimensional problem with orthodontic treatment alone is considered challenging owing to anatomical limitations. Moreover, a history of orthodontic treatment with premolar extraction makes retreatment difficult. This case report illustrates the application of a maxillary tissue bone-borne expander and biocreative reverse curve system in a 23-year-old female patient with a severe anterior open bite and transverse discrepancy who underwent orthodontic treatment with four premolar extractions. By setting the treatment target under precise diagnosis and using appropriate appliances, a satisfactory treatment result could be achieved without orthognathic surgery.

• 한국통신학회논문지
• /
• 제32권7A호
• /
• pp.686-693
• /
• 2007

와이브로 상향링크의 경우 개방형 전력제어에서는 피드백 없이 전력 할당을 하기 때문에 피드백에 사용될 무선자원을 절약 할 수는 있지만 단말에 정확한 전력 할당을 하기 어렵다. 이에 본 논문은 잡음간섭 값을 현재 무선 환경에 적응하는 방법을 제시하여 순시적으로 변화하는 무선 환경에 적합하게 하고 전력 할당의 상/하향 계단값 결정 방법을 대칭형과 비대칭형으로 제안하여 비교 실험하였다. 컴퓨터를 이용한 실험을 통해서 시스템 파라미터에 따라 상/하향 계단값을 다르게 적용할 때 높은 섹터 처리율과 낮은 오류율 결과를 얻을 수 있다는 것을 알 수 있다.

• 한국지열·수열에너지학회논문집
• /
• 제17권1호
• /
• pp.23-32
• /
• 2021

Conventional wind power generators have limited installation sites due to low efficiency due to reverse resistance or high cut-in speed. To compensate for these problems, this study proposed another new type of tilting wind turbine. The key to this method is the structural design of a cylindrical cam with a guide groove that allows the blade to tilt. As the blade rotates by the cam, it tilts according to the angle. In the section that generates torque by receiving drag, the blade is made perpendicular to the wind. And it is a structure that creates a parallel state with the wind in the section where reverse resistance occurs. We prepared six types of cams considering the length of the section subject to drag, reverse resistance, tilting section. The performance was analyzed as the maximum value of the output, torque coefficient, and efficiency coefficient, which is indicated by setting different wind speed and low TSR.