• The KIPS Transactions:PartD
• /
• v.19D no.1
• /
• pp.39-48
• /
• 2012

In order to quickly understand which changes of source codes have been made and to perform effective maintenance of a system, it is important to visualize the changed parts. Although there are many works for analyzing software changes, there are few works for visualizing both of the change types and change quantifications for Java based systems. In this paper, we propose a change analysis technique based on class diagram and provide a change visualization technique by using change quantification information. In order to check the structural changes in source codes, source codes are transformed to class diagrams by reverse engineering methods. On the class diagrams, the changes are analyzed and quantified by numbers. Based on the change quantification, the changes are visualized on the class diagram by color spectrum. By using visualization techniques, maintainers can easily recognize the code changes to reduce the cost and time of maintenance.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.17-24
• /
• 2000

Reverse osmosis (RO) system was applied to improve wine quality. General wine (GEN) and wines containing different sugar levels $24^{\circ}Brix$ (RO-24) and $24^{\circ}Brix$ (RO-28) by removing pure water using RO system without sugar addition on brewing method. And they were compared by wine aroma analysis. The preparing method of analysis was LLCE (liquid-liquid continuous extraction). And volatile aroma compounds of different wines were prepared for raw, and diluted materials in same proportion. The wine aromas were described by trained twelve panelists for QDA (quantitative descriptive analysis) and showed for FD (flavor dilution)-chromatogram. Consequently, overall acceptability of RO-28 showed better than that of other treatments. Aromas of RO-28 also were represented the high contents of positive aroma compounds such as ethanol and ethyl acetate, which were identified by GC-O and GC-MS.

• Composites Research
• /
• v.32 no.4
• /
• pp.177-184
• /
• 2019

If what the mechanical properties according to a layer have was found out by analyzing the already fabricated composite, it could be possible to develop the composite of the better performance than the existing products. In this study, we tried to calculate the mechanical properties of the inner prepreg lamina by applying the reverse design technique to the composite structure made by laminating prepregs. When the physical quantities obtained by the simple tensile test are used alone and the physical quantities obtained by the tensile test and the mode analysis are used at the same time, the results of this study show that the accuracy of the latter is higher Finally, the maximum error of $E_1$ predicted was 0.09% and the maximum error of predicted $E_2$ was 7%.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.7
• /
• pp.539-547
• /
• 2021

Helicopter rotor blade is required to be designed by considering the interacting effects among aerodynamics, flexibility, and controllability. The reverse design allows the structural components to have common characteristics by using the configuration numerics and experimental results. This paper aims to design the composite rotor blade which will feature common characteristics with that of BO-105. The present engineering design procedure is done by dividing the rotor blade into a few sections and composite laminates across the cross section. For each section, variational asymptotic beam sectional analysis (VABS) program is used to evaluate its flapwise, lagwise, and torsion stiffnesses to have discrepancy smaller than certain tolerance. Finally, CAMRAD II is used to predict the stress acting on the rotor blade during the specific flight condition and to check whether the present deign is structurally valid.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.32 no.5
• /
• pp.855-867
• /
• 2022

As the need for a deep learning accelerator increases with the development of IoT equipment, research on the implementation and safety verification of the deep learning accelerator is actively. In this paper, we propose a new side channel analysis methodology for secret information that overcomes the limitations of the previous study in Usenix 2019. We overcome the disadvantage of limiting the range of weights and restoring only a portion of the weights in the previous work, and restore the IEEE754 32bit single-precision with 99% accuracy with a new method using CPA. In addition, it overcomes the limitations of existing studies that can reverse activation functions only for specific inputs. Using deep learning, we reverse activation functions with 99% accuracy without conditions for input values with a new method. This paper not only overcomes the limitations of previous studies, but also proves that the proposed new methodology is effective.

• Clinics in Shoulder and Elbow
• /
• v.27 no.1
• /
• pp.59-71
• /
• 2024

Background: Restoration of external (ER) and internal rotation (IR) after Grammont-style reverse shoulder arthroplasty (RSA) is often unreliable. The purpose of this systematic review was to evaluate the influence of RSA medio-lateral offset and subscapularis repair on axial rotation after RSA. Methods: We conducted a systematic review of studies evaluating axial rotation (ER, IR, or both) after RSA with a defined implant design. Medio-lateral implant classification was adopted from Werthel et al. Meta-analysis was conducted using a random-effects model. Results: Thirty-two studies reporting 2,233 RSAs were included (mean patient age, 72.5 years; follow-up, 43 months; 64% female). The subscapularis was repaired in 91% (n=2,032) of shoulders and did not differ based on global implant lateralization (91% for both, P=0.602). On meta-analysis, globally lateralized implants achieved greater postoperative ER (40° [36°-44°] vs. 27° [22°-32°], P<0.001) and postoperative improvement in ER (20° [15°-26°] vs. 10° [5°-15°], P<0.001). Lateralized implants with subscapularis repair or medialized implants without subscapularis repair had significantly greater postoperative ER and postoperative improvement in ER compared to globally medialized implants with subscapularis repair (P<0.001 for both). Mean postoperative IR was reported in 56% (n=18) of studies and achieved the minimum necessary IR in 51% of lateralized (n=325, 5 cohorts) versus 36% (n=177, 5 cohorts) of medialized implants. Conclusions: Lateralized RSA produces superior axial rotation compared to medialized RSA. Lateralized RSA with subscapularis repair and medialized RSA without subscapularis repair provide greater axial rotation compared to medialized RSA with subscapularis repair. Level of evidence: 2A.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.62-69
• /
• 2002

For improving the motion accuracy of hydrostatic table, corrective machining algorithm is proposed in this paper. The algorithm consists of three main processes. reverse analysis is performed firstly to estimate rail profile from measured linear and angular motion error, in the algorithm. For the next step, corrective machining information is decided as referring to the estimating rail profile. Finally, motion errors on correctively machined rail are analized by using motion error analysis method proposed in the previous paper. These processes can be iterated until the analized motion errors are satisfied with target accuracy. In order to verify the validity of the algorithm theoretically, motion errors by the estimated rail, after corrective machining, are compared with motion errors by true rail assumed as the measured value. Estimated motion errors show good agreement with assumed values, and it is confirmed that the algorithm is effective to acquire the corrective machining information to improve the accuracy of hydrostatic table.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.2
• /
• pp.60-67
• /
• 2004

For improving the motion accuracy of hydrostatic tables, a corrective machining algorithm is proposed in this paper. The algorithm consists of three main processes. The reverse analysis is performed firstly to estimate the rail profile from the measured linear and angular motion error, in the algorithm. For the next step, the corrective machining information is obtained based upon the estimated rail pronto. Finally, the motion errors on the correctively machined rail are analyzed by using the motion error analysis method. These processes are iterated until the analyzed motion errors are satisfactory within the target accuracy. In order to verify the validity of the algorithm theoretically, the motion errors calculated by the estimated rail after the corrective machining process, are compared with those by the true rail which is previously assumed as the initially measured value. The motion errors calculated using the estimated rail show good agreement with the assumed values, and it is shown that the algorithm is effective in acquiring the corrective machining information to improve the accuracy of hydrostatic tables.

• Transactions of Materials Processing
• /
• v.24 no.6
• /
• pp.437-442
• /
• 2015

The development of polishing technology has enabled the production of injection molds with high quality surfaces and shapes. For products such as mobile phones which require high quality performance the use of plastic materials has many constraints such as shrinkage and deflection. The purpose of the current research is to use reverse engineering in order to find and analyze the data of a selected aspherical lens and then creating a process to design an improved lens. Additionally, the improved lenses are subject to molding analysis. In order to solve this problem, the lens construction program, Zemax, was used to analyze and optimize performance. In the case of optimization, the object was to eliminate spherical aberration and to find good MTF data. The result of the optimization data was similar to the MTF data found from a random lens. Specific resin and analysis conditions were selected and CAD modeling was done to enhance the injection molding analysis.

• KEPCO Journal on Electric Power and Energy
• /
• v.7 no.1
• /
• pp.125-128
• /
• 2021

This paper presents the root cause failure analysis of the circulating water pump in the 560 MW thermal power plant. A fractured austenitic stainless-steel shaft operated for 24 years was examined. Fracture morphology was investigated by micro and macro-fractographic analysis. The metallurgical analyses including chemical analysis, metallography and hardness testing were performed. The analysis reveals that the pump shaft was fractured due to the reverse bending load with combination of rotating bending load. Corrective actions for plant operator was recommended based on the analysis.