Corrective Machining Algorithm for Improving the Motion Accuracy of Hydrostatic Table

유정압테이블의 정밀도향상을 위한 수정가공 알고리즘

  • 박천홍 (한국기계연구원 자동화연구부 공작기계그룹) ;
  • 이찬흥 (한국기계연구원 자동화연구부 공작기계그룹) ;
  • 이후상 (한국기계연구원 자동화연구부 공작기계그룹)
  • Published : 2002.06.01

Abstract

For improving the motion accuracy of hydrostatic table, corrective machining algorithm is proposed in this paper. The algorithm consists of three main processes. reverse analysis is performed firstly to estimate rail profile from measured linear and angular motion error, in the algorithm. For the next step, corrective machining information is decided as referring to the estimating rail profile. Finally, motion errors on correctively machined rail are analized by using motion error analysis method proposed in the previous paper. These processes can be iterated until the analized motion errors are satisfied with target accuracy. In order to verify the validity of the algorithm theoretically, motion errors by the estimated rail, after corrective machining, are compared with motion errors by true rail assumed as the measured value. Estimated motion errors show good agreement with assumed values, and it is confirmed that the algorithm is effective to acquire the corrective machining information to improve the accuracy of hydrostatic table.

Keywords

References

  1. 박천홍, 오윤진, 이찬홍, 홍준희, '전달함수를 이용한 유정압테이블 운동정밀도 해석법의 제안 및 이론적 검증,' 한국정밀공학회지, 제 19권, 제5호, pp. 56-63, 2002
  2. 오윤진, 박천홍, 이찬홍, 홍준희, '전달함수를 이용한 유정압테이블 운동정밀도 해석법의 실험적 검증,' 한국정밀공학회지, 제 19 권, 제 5호, pp. 64-71, 2002
  3. 兒玉愼三, 須田信英, '制御理論,' 日本計測自動制御學會, 1981