• Animal Bioscience
• /
• v.36 no.12
• /
• pp.1918-1925
• /
• 2023

Objective: The objective of this study was to evaluate the effect of biogas slurry application on biomass production and the silage quality of corn. Methods: A field experiment was conducted in which corn was grown using different biogas slurry application rates. The effect of 25% to 500% biogas slurry nitrogen replacement (T1 to T14) on the yield and quality indices of corn were studied by field plot experiments. Results: The results revealed that biogas slurry application improved the stem diameter and relative feed value of corn silage in treatments T13 and T11. Moreover, the fermentation quality of corn silage was improved due to an increase in lactic acid content; in comparison with the chemical synthetic fertilizer (CF) group. The crude protein contents of corn silage had no obvious change with increasing biogas slurry application. However, the forage quality index of acid detergent fiber was decreased (p<0.05) in the T11 group compared with the CF group. In addition, higher (p<0.05) 30 h in vitro dry matter digestibility and 30 h in vitro neutral detergent fiber digestibility were observed in the T11 and T13 groups than in the CF group. Conclusion: Based on these results, it was concluded that the optimum biogas slurry application rate for corn was approximately 350% to 450% biogas slurry nitrogen replacement under the present experimental conditions.

• 전기의세계
• /
• v.29 no.11
• /
• pp.727-732
• /
• 1980

The main purpose of this paper is to study on the effect of contact state between metal-polymer interface in electrical conduction of polymeric materials under low field region. The electric conduction of polythylene (PE) sandwitched in between two gold (Au) electrodes was lower than that of PE Sandwitched in between two Aluminium (Al) electrodes under low external field. The discharge current of PE which have been treated by the high field application is also obtained some results under no external field. The obtained results can suggest that the material of electrode come to influence on the electrical conduction of polymeric materials and are important as a basis for analysing the data on TSC. It is also suggestive that results of observation must be considered in cases of insulation design of electrical machinery.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.84-90
• /
• 2001

The electro-reheoligical(ER) effect refers to the abrupt change in viscosity in certain suspensions on application of an electric field. This paper presents experimental results on material properties of an ER fluids subjected to electrical fatigues. As a first step, two types of EF fluids are made of arabic gum and methyl cellulose(MC) choosing 25% of parti-cle weight-concentration. Following the construction of test mechanism for electrical durability of ER fluid, the dynamic yield shear stress and current density of the ER fluids are experimentally distilled as a function of electric field. The yield shear stress of operated ER fluids are distilled and compared with those of unused ER fluids.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.65-69
• /
• 2018

Due to large in-field current carrying capacity and strong mechanical strength, a REBCO wire has been regarded as a viable high temperature superconductor (HTS) option for high field MRI and > 1 GHz (>23.5 T) NMR magnets. However, a REBCO magnet is well known to have an inherent problem of field inhomogeneity, so-called 'Screening Current induced magnetic Field (SCF)'. Recently, 'field shaking' and 'current overshoot operation' techniques have been successfully demonstrated to mitigate the SCF and enhance the field homogeneity by experiments. To investigate the effectiveness of current overshooting operation technique, a numerical simulation is conducted for a test REBCO magnet composed of a stack of double pancake coils using '2D edge-element magnetic field formulation' combined with 'domain homogenization' scheme. The simulation result demonstrates that an appropriate amount of current overshoot can negate the SCF. To verify the simulation results, current overshoot experiments are conducted for the REBCO magnet in liquid nitrogen. Experimental results also demonstrate the possible application of current overshoot technique to mitigate the SCF and enhance the field homogeneity.

• KSTLE International Journal
• /
• v.3 no.1
• /
• pp.23-25
• /
• 2002

The electrorheological (ER) behavior of amino coated chitosan phosphate suspension in silicone oil is investigated. Amino coated chitosan phosphate suspension shows a typical ER response (Bingham flow behavior) upon application of an electric field due to the polarizability of phosphoryl polar group. The shear stress for the suspension exhibits a linear dependence on an electric field power of 1.94. The values of structure factors $A_s$obtains 2 far mine coated chitosan phosphate suspension and it may be due to the formation of multiple chains upon application of the electric field. Throughtout the experimental results, amino coated chitosan phosphate suspension shows good dispersion stability and found to be an anhydrous ER fluid.

• KSTLE International Journal
• /
• v.10 no.1_2
• /
• pp.13-16
• /
• 2009

The electrorheological(ER) behavior of hollow polyaniline(PANI) sebacate suspension in silicone oil was investigated by varying the electric fields and shear rates, respectively. The hollow PANI sebacate susepnsion acted as a typical Bingham fluid caused by the polarizability of an amide polar group and showed shear yield stress due to the formation of chains upon application of an electric field. The shear stress for the hollow PANI sebacate suspension exhibited an electric field power of 1.24. On the basis of the experimental results, the newly synthesized hollow PANI sebacate suspension was found to be an anhydrous ER fluid.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.7-12
• /
• 2002

The purpose of this study is to design and to apply the self-compaction concrete mixture to field, having not only high strength but also compensation for shrinkage without thermal crack under 4 sides outer restraint of the member. In the experimental mix, replacement ratio of limestone Powder, CSA expansive additives, and unit water were selected as parameters, using portland blast-furnace slag cement. And, bleeding test, expansibility test, hydration heat analysis were performed. As a results, when Cement is replaced with 35% limestone Powder, 6% CSA expansive additives at unit water 175kg/$m^3$, demanded performances of fresh and hardened self-compaction concrete are accomplished in the field application.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.764-767
• /
• 2007

We investigated the field emission of single carbon nanotube including the anode effect by calculating the tunneling probability of an electron. The experimental results from this study were in agreement with our theoretical calculations. The constant enhancement factor was calculated using an approximation of the potential barrier.

• KSTLE International Journal
• /
• v.8 no.1
• /
• pp.7-10
• /
• 2007

The rheological property of hollow PANI malonate suspension in silicone oil was investigated by varying the electric fields and shear rates, respectively. The hollow PANI malonate susepnsion showed a typical electrorheological (ER) response caused by the polarizability of an amide polar group and shear yield stress due to the formation of chains upon application of an electric field. The shear stress for the hollow PANI malonate suspension exhibited an electric field power of 0.90. On the basis of the experimental results, the newly synthesized hollow PANI malonate suspension was found to be an anhydrous ER fluid.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.10a
• /
• pp.381-386
• /
• 1994

Recently, the design and construction of massive concrete structures are increased. But, the temperature rise within a large concrete mass make the construction of massive concrete structures be very difficult. Therefore, in Seohae Grand Bridge Project, the field measurement of hydration heat for the massive concrete footings(11$\times$22$\times$4m) was carried out. It was shown to be possible to construct the massive concrete footing successfully by application of pipe cooling system. And the measurement results showed that standard code for concrete practice was very conservative.