• Title/Summary/Keyword: Result Analysis

Search Result 54,151, Processing Time 0.087 seconds

Application of Terrestrial LiDAR for Reconstructing 3D Images of Fault Trench Sites and Web-based Visualization Platform for Large Point Clouds (지상 라이다를 활용한 트렌치 단층 단면 3차원 영상 생성과 웹 기반 대용량 점군 자료 가시화 플랫폼 활용 사례)

  • Lee, Byung Woo;Kim, Seung-Sep
    • Economic and Environmental Geology
    • /
    • v.54 no.2
    • /
    • pp.177-186
    • /
    • 2021
  • For disaster management and mitigation of earthquakes in Korea Peninsula, active fault investigation has been conducted for the past 5 years. In particular, investigation of sediment-covered active faults integrates geomorphological analysis on airborne LiDAR data, surface geological survey, and geophysical exploration, and unearths subsurface active faults by trench survey. However, the fault traces revealed by trench surveys are only available for investigation during a limited time and restored to the previous condition. Thus, the geological data describing the fault trench sites remain as the qualitative data in terms of research articles and reports. To extend the limitations due to temporal nature of geological studies, we utilized a terrestrial LiDAR to produce 3D point clouds for the fault trench sites and restored them in a digital space. The terrestrial LiDAR scanning was conducted at two trench sites located near the Yangsan Fault and acquired amplitude and reflectance from the surveyed area as well as color information by combining photogrammetry with the LiDAR system. The scanned data were merged to form the 3D point clouds having the average geometric error of 0.003 m, which exhibited the sufficient accuracy to restore the details of the surveyed trench sites. However, we found more post-processing on the scanned data would be necessary because the amplitudes and reflectances of the point clouds varied depending on the scan positions and the colors of the trench surfaces were captured differently depending on the light exposures available at the time. Such point clouds are pretty large in size and visualized through a limited set of softwares, which limits data sharing among researchers. As an alternative, we suggested Potree, an open-source web-based platform, to visualize the point clouds of the trench sites. In this study, as a result, we identified that terrestrial LiDAR data can be practical to increase reproducibility of geological field studies and easily accessible by researchers and students in Earth Sciences.

Application of Automated Microscopy Equipment for Rock Analog Material Experiments: Static Grain Growth and Simple Shear Deformation Experiments Using Norcamphor (유사물질 실험을 위한 자동화 현미경 실험 기기의 적용과 노캠퍼를 이용한 입자 성장 및 단순 전단 변형 실험의 예)

  • Ha, Changsu;Kim, Sungshil
    • Economic and Environmental Geology
    • /
    • v.54 no.2
    • /
    • pp.233-245
    • /
    • 2021
  • Many studies on the microstructures in rocks have been conducted using experimental methods with various equipment as well as natural rock studies to see the development of microstructures and understand their mechanisms. Grain boundary migration of mineral aggregates in rocks could cause grain growth or grain size changes during metamorphism or deformation as one of the main recrystallization mechanisms. This study suggests improved ways regarding the analog material experiments with reformed equipment to see sequential observations of these grain boundary migration. It can be more efficient than the existing techniques and carry out an appropriate microstructure analysis. This reformed equipment was implemented to enable optical manipulation by mounting polarizing plates capable of rotating operation on a stereoscopic microscope and a deformation rig capable of experimenting with analog materials. The equipment can automatically control the temperature and strain rate of the deformation rig by microcontrollers and programming and can take digital photomicrographs with constant time intervals during the experiment to observe any microstructure changes. The composite images synthesized using images by rotated polarizing plates enable us to see more accurate grain boundaries. As a rock analog material, norcamphor(C7H10O) was used, which has similar birefringence to quartz. Static grain growth and simple shear deformation experiments were performed using the norcamphor to verify the effectiveness of the equipment. The static grain growth experiments showed the characteristics of typical grain growth behavior. The number of grains decreases and the average grain size increases over time. These case experiments also showed a clear difference between the growth curves with three temperature conditions. The result of the simple shear deformation experiment under the medium temperature-low strain rate showed no significant change in the average grain size but presented the increased elongation of grain shapes in the direction of about 53° regarding the direction perpendicular to the shearing direction as the shear strain increases over time. These microstructures are interpreted as both the plastic deformation and the internal recovery process in grains are balanced by the deformation under the given experimental conditions. These experiments using the reformed equipment represent the ability to sequentially observe changing the microstructure during experiments as desired in the tests with the analog material during the entire process.

The Memorial Park Planning of 5·18 Historic Sites - For Gwangju Hospital of Korea Army and 505 Security Forces - (5·18 사적지 기념공원화 계획 - 국군광주병원과 505보안부대 옛터를 대상으로 -)

  • Lee, Jeong-Hee;Yun, Young-Jo
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.47 no.5
    • /
    • pp.14-27
    • /
    • 2019
  • This study presents a plan for a memorial park that respects the characteristics based on the historical facts for the concept of space of the Gwangju Hospital of Korea Army and the location of the 505 Security Forces, which were designated as historic sites after the 5-18 Democratization Movement. The Gwangju Metropolitan City as it is the location of the 5-18 historic sites, is taking part in the 5-18 Memorial Project, and plans to establish a city park recognizing the historic site of the 5-18 Democratization Movement, which has been preserved only as a memory space to this point. The park is promoting a phased development plan. This study suggests that the 5-18 historic sites can be modernized and that social consensus can establish the framework of the step-by-step planning and composition process to ensure the plans for the space heals wounds while preserving the history. In this paper, we propose a solution to a problem. We solve the approach for space utilization through an analysis of precedent research and planning cases related to park planning at historical sites. In addition to exploring the value of the site, we also describe the space utilization strategy that covers the historical characteristics and facts while maintaining the concept of park planning. As a result of the research, the historic site of the Gwangju Hospital of Korea Army is planned as a park of historical memory and healing in order to solve the problems left behind by the 5-18 Democratization Movement. The historic site of the 505 Security Forces was selected as an area for historical experiences and a place for learning that can be sympathized with by future generations of children and adolescents in terms of expanding and sustaining the memory of the 5-18 Democratization Movement. In the planning stage, the historical sites suggested the direction of space utilization for representation as did the social consensus of citizens, related groups, and specialists. Through this study, we will contribute to construction of a memorial park containing historical values in from 5-18 historic sites. It is meaningful to suggest a direction that can revitalize the life of the city as well as its citizen and can share with the history with future generations beyond being a place to heal wounds and keep alive the memory of the past.

Effect of Pipes Layout and Flow Velocity on Temperature Distribution in Greenhouses with Hot Water Heating System (방열관의 배치와 관내 유속이 온수난방 온실의 온도분포에 미치는 영향)

  • Shin, Hyun-Ho;Kim, Young-Shik;Nam, Sang-Woon
    • Journal of Bio-Environment Control
    • /
    • v.28 no.4
    • /
    • pp.335-341
    • /
    • 2019
  • In order to provide basic data for uniformization of temperature distribution in heating greenhouses, heating experiments were performed in two greenhouses with a hot water heating system. By analyzing heat transfer characteristics and improving pipes layout, measures to reduce the variation of pipe surface temperature and to improve the uniformity were derived. As a result of analyzing the temperature distributions of two different greenhouses and examining the maximum deviation and uniformity, it was found that the temperature deviation of greenhouses with a large amount of hot water flow and a short heating pipe was small and the uniformity was high. And it was confirmed that the temperature deviation was reduced and the uniformity was improved when the circulating fan was operated. The correlation between the surface temperature of the heating pipe and the indoor air temperature was a positive correlation and statistically significant(p<0.01) in both greenhouses. It was confirmed that the indoor temperature distribution in a hot water heating greenhouse was influenced by the surface temperature distribution of heating pipe, and the uniformity of indoor temperature distribution could be improved by arranging the heating pipe to minimize the temperature deviation. Analysis of the heat transfer characteristics of heating pipe showed that the temperature deviation increased as the pipe length became longer and the temperature deviation became smaller as the flow rate in pipe increased. Therefore, it was considered that the temperature distribution and the uniformity of environment in a greenhouse could be improved by arranging the heating pipe to shorten the length and controlling the flow velocity in pipe. In order to control the temperature deviation of one branch pipe within $3^{\circ}C$ in the tube rail type hot water heating system most used in domestic greenhouses, when the flow velocity in the pipe is 0.2, 0.4, 0.6, 0.8, $1.0m{\cdot}s^{-1}$, the length of a heating pipe should be limited to 40, 80, 120, 160, 200m, respectively.

Wetland Habitat Assessement Utilizing TDI(Trophic Diatom Index) (부착돌말영양지수(TDI)를 활용한 습지환경 평가)

  • Kim, Seong-Ki;Choi, Jong-Yun
    • Korean Journal of Environment and Ecology
    • /
    • v.33 no.5
    • /
    • pp.525-538
    • /
    • 2019
  • The purpose of this study was to analyze the habitat status and species diversity of benthic diatoms and estimate the applicability of TDI (Trophic Diatom Index) to obtain the basic data for the identification and management of created wetlands in the Nakdong River. We observed a total of 38 families and 173 species of benthic diatom during the survey period, and spring and autumn showed a similar number of species of 156 and 154, respectively. The result of the SOM (Self-Organizing Map) analysis showed that the distribution of benthic diatom was sensitive to environmental factors such as nutrient concentration and rainfall in each wetland. The cluster 1 was characterized by the survey sites of autumn mostly and consisted of points of high TDI, although the nutrients such as total phosphorus and total nitrogen were low, and the species number and abundance of diatoms were low. Conversely, cluster 4 was characterized by the survey sites of spring mostly and consisted of points of low TDI, even though total nitrogen was high. Considering that most of the created wetlands had the reduced inflow and outflow, the increased flow rate in the summer lowers nutrient values in autumn, and the species number and abundance of benthic diatom decreases due to the increase of turbidity, which reduces the light penetrations to the substrates. On the contrary, the TDI value is low in spring because the low water level causes insufficient substrate surface to the benthic diatoms, and it is too early for the establishment and development of saprophilous species. Although various studies have used TDI as an indicator for evaluating the habitat environment and water quality, it is not a good evaluation indicator in this study since the nutrient concentration in the wetlands mostly high as they have a low flow rate and are close to the stagnant area. Nevertheless, additional periodic surveys that comprehensively reflect the fact that the summer rainfall and inflow/outflow regulating function might affect the species diversity and distribution of benthic diatoms are necessary.

Meteorological Factors Associated with the Number of Emergency Room Patients with Wrist-Cutting Behavior (손목자해로 응급실에 내원한 환자수와 기후인자와의 관련성)

  • Han, Jae Hyun;Suh, Seung Wan;Cho, Gyu Chong;Kim, Jung Mi;Seo, Hong Taek;Jung, Yu Jin;Seong, Su Jeong;Hwang, Jae Yeon;Lee, Won Joon
    • Korean Journal of Psychosomatic Medicine
    • /
    • v.28 no.2
    • /
    • pp.161-167
    • /
    • 2020
  • Objectives : Although the seasonality of suicide is a well-known phenomenon, little is reported about the seasonality of non-suicidal self-injury. The purpose of this study was to identify the seasonality of wristcutting behavior and to examine its relationship with meteorological factors. Methods : To identify the presence of seasonality, we investigated whether there was a difference in the average number of visits per month to an emergency room (ER) of an urban hospital for 226 patients with wrist-cutting behavior enrolled between December 2014 and May 2019. To ascertain significant meteorological factors, we used the multiple Poisson regression using generalized additive model with time, monthly temperature, monthly sunshine hour, and atmospheric pressure in the prior month as explanatory variables. Results : In males, the average number of monthly visits to the ER for wrist cutting behavior differed by month and was the highest in September (male : p=0.048, female : p=0.21, total : p=0.28). As a result of multiple regression analysis, the average number of patients admitted to the ER for wrist cutting behavior was related to the interaction between atmospheric pressure in the prior month and temperature in males (p=0.010), and showed a positive correlation with sunlight in females [p=0.044, β=4.70×10-3, 95% CI=(1.19×10-4, 9.27×10-3)]. Conclusions : Wrist cutting behavior shows seasonality in male, which is associated with changes in meteorological variables.

The Study on the Effect of Target Volume in DQA based on MLC log file (MLC 로그 파일 기반 DQA에서 타깃 용적에 따른 영향 연구)

  • Shin, Dong Jin;Jung, Dong Min;Cho, Kang Chul;Kim, Ji Hoon;Yoon, Jong Won;Cho, Jeong Hee
    • The Journal of Korean Society for Radiation Therapy
    • /
    • v.32
    • /
    • pp.53-59
    • /
    • 2020
  • Purpose: The purpose of this study is to compare and analyze the difference between the MLC log file-based software (Mobius) and the conventional phantom-ionization chamber (ArcCheck) dose verification method according to the change of target volume. Material and method: Radius 0.25cm, 0.5cm, 1cm, 2cm, 3cm, 4cm, 5cm, 6cm, 7cm, 8cm, 9cm, 10cm with a Sphere-shaped target Twelve plans were created and dose verification using Mobius and ArcCheck was conducted three times each. The irradiated data were compared and analyzed using the point dose error value and the gamma passing rate (3%/3mm) as evaluation indicators. Result: Mobius point dose error values were -9.87% at a radius of 0.25cm and -4.39% at 0.5cm, and the error value was within 3% at the remaining target volume. The gamma passing rate was 95% at a radius of 9cm and 93.9% at 10cm, and a passing rate of more than 95% was shown in the remaining target volume. In ArcCheck, the average error value of the point dose was about 2% in all target volumes. The gamma passing rate also showed a pass rate of 98% or more in all target volumes. Conclusion: For small targets with a radius of 0.5cm or less or a large target with a radius of 9cm or more, considering the uncertainty of DQA based on MLC log files, phantom-ionized DQA is used in complementary ways to include point dose, gamma index, DVH, and target coverage. It is believed that it is desirable to verify the dose delivery through a comprehensive analysis.

Estimation of Soil Moisture Using Sentinel-1 SAR Images and Multiple Linear Regression Model Considering Antecedent Precipitations (선행 강우를 고려한 Sentinel-1 SAR 위성영상과 다중선형회귀모형을 활용한 토양수분 산정)

  • Chung, Jeehun;Son, Moobeen;Lee, Yonggwan;Kim, Seongjoon
    • Korean Journal of Remote Sensing
    • /
    • v.37 no.3
    • /
    • pp.515-530
    • /
    • 2021
  • This study is to estimate soil moisture (SM) using Sentinel-1A/B C-band SAR (synthetic aperture radar) images and Multiple Linear Regression Model(MLRM) in the Yongdam-Dam watershed of South Korea. Both the Sentinel-1A and -1B images (6 days interval and 10 m resolution) were collected for 5 years from 2015 to 2019. The geometric, radiometric, and noise corrections were performed using the SNAP (SentiNel Application Platform) software and converted to backscattering coefficient of VV and VH polarization. The in-situ SM data measured at 6 locations using TDR were used to validate the estimated SM results. The 5 days antecedent precipitation data were also collected to overcome the estimation difficulty for the vegetated area not reaching the ground. The MLRM modeling was performed using yearly data and seasonal data set, and correlation analysis was performed according to the number of the independent variable. The estimated SM was verified with observed SM using the coefficient of determination (R2) and the root mean square error (RMSE). As a result of SM modeling using only BSC in the grass area, R2 was 0.13 and RMSE was 4.83%. When 5 days of antecedent precipitation data was used, R2 was 0.37 and RMSE was 4.11%. With the use of dry days and seasonal regression equation to reflect the decrease pattern and seasonal variability of SM, the correlation increased significantly with R2 of 0.69 and RMSE of 2.88%.

A Comparison between Multiple Satellite AOD Products Using AERONET Sun Photometer Observations in South Korea: Case Study of MODIS,VIIRS, Himawari-8, and Sentinel-3 (우리나라에서 AERONET 태양광도계 자료를 이용한 다종위성 AOD 산출물 비교평가: MODIS, VIIRS, Himawari-8, Sentinel-3의 사례연구)

  • Kim, Seoyeon;Jeong, Yemin;Youn, Youjeong;Cho, Subin;Kang, Jonggu;Kim, Geunah;Lee, Yangwon
    • Korean Journal of Remote Sensing
    • /
    • v.37 no.3
    • /
    • pp.543-557
    • /
    • 2021
  • Because aerosols have different spectral characteristics according to the size and composition of the particle and to the satellite sensors, a comparative analysis of aerosol products from various satellite sensors is required. In South Korea, however, a comprehensive study for the comparison of various official satellite AOD (Aerosol Optical Depth) products for a long period is not easily found. In this paper, we aimed to assess the performance of the AOD products from MODIS (Moderate Resolution Imaging Spectroradiometer), VIIRS (Visible Infrared Imaging Radiometer Suite), Himawari-8, and Sentinel-3 by referring to the AERONET (Aerosol Robotic Network) sun photometer observations for the period between January 2015 and December 2019. Seasonal and geographical characteristics of the accuracy of satellite AOD were also analyzed. The MODIS products, which were accumulated for a long time and optimized by the new MAIAC (Multiangle Implementation of Atmospheric Correction) algorithm, showed the best accuracy (CC=0.836) and were followed by the products from VIIRS and Himawari-8. On the other hand, Sentinel-3 AOD did not appear to have a good quality because it was recently launched and not sufficiently optimized yet, according to ESA (European Space Agency). The AOD of MODIS, VIIRS, and Himawari-8 did not show a significant difference in accuracy according to season and to urban vs. non-urban regions, but the mixed pixel problem was partly found in a few coastal regions. Because AOD is an essential component for atmospheric correction, the result of this study can be a reference to the future work for the atmospheric correction for the Korean CAS (Compact Advanced Satellite) series.

Considerations of Countermeasure Tasks in the Fields of Forest and Forestry in Korea through Case Study on "The Nagoya Protocol (Access to Genetic Resources and Benefit Sharing)" ("유전자원의 접근과 이익공유(ABS)" 사례연구를 통한 국내 산림·임업분야 대응과제 고찰)

  • Lee, Gwan Gyu;Kim, Jun Soon;Jung, Haw young
    • Journal of Korean Society of Forest Science
    • /
    • v.100 no.3
    • /
    • pp.522-534
    • /
    • 2011
  • The aim of this study is to draw forth the tasks for establishing the right of native biology in Korea through the case study on 'Access on genetic resources and Benefit Sharing'. For this purpose, this study decided on its research subject by selecting Hoodia, on which ABS treaty was made the most recently, through the examination of the representative ABS precedents on plant species. This study analyzed the process background of ABS on Hoodia, and compared & analyzed the ABS procedures of 'Bonn Guidelines' adopted by the 6th Conference of the Parties of the Convention on Biological Diversity in 2002 and Hoodia case. Together with the ABS major issues in common drawn as a result of this analysis, and "Nagoya Protocol" adopted by the 10th Conference of the Parties of the Convention on Biological Diversity, this study intended to shed a light on the impending tasks which Korea faces at present and its role relationship. The research results are as follows: 1. It is required that species habitats should be divided based on biological classification and its subsequent community should be established with the development of infrastructure such as a community's independent production, management and monitoring of bio-species. 2. There needs to be a designation of ABS National Focal Point for sharing of ABS-related general information, boosting of implementation of the relevant convention. 3. There needs to be the establishment of ABS convention system consequent on legislative, administrative, political procedures, and designation of the Competent National Authorities for the provision of the format of Prior Informed Consent (PIC) and Mutually Agreed Terms (MAT) and their contents assessment and confirmation. 4. There should be the establishment of integrated management system of ABS-related research and development of forest biological resources and its relevant research projects. 5. There should be information development through the distribution of responsibility and role between the ministries and offices concerned according to bio-resources, and there needs to be efforts in aiming for opening a working group of academic-industrial institutions for developing a mutually interchangeable system. 6. It's required that the efficient access between industrial circles and the people should be promoted by setting up ABS support center of biological resources in ministry and office's charge. 7. There should be a selection of a national supervisory organization for securement of the right of a local community and monitoring of ABS convention implementation, and a countermeasure system for preventing outflow of forest bioresources. Conclusively, it's judged that it will be possible to inquire into the countermeasures for the establishment of the native forest biology dominion through such research results.