• Journal of Korean Society for Quality Management
• /
• v.42 no.3
• /
• pp.339-360
• /
• 2014

Purpose: The objective of this paper was to analyze the requirements of the end-users by class after carrying out a survey on the user requirements for sleeping bags and utilize the result for effective product development. Methods: The test for difference in means by class was conducted through one sample analysis and one-way ANOVA after the survey result has gone through a reliability verification, and an LSD (Least Significant Difference) test was conducted as a post-mortem method. Results: A significant result was derived from the survey on the user requirements for sleeping bags by method of use, use of combination of sleeping bag components or a sleeping bag alone. Conclusion: The significant result derived from the survey of this paper on the user requirements for sleeping bags can be utilized for effective development of sleeping bags.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.8 no.1
• /
• pp.83-95
• /
• 2000

Lift, drag, pitching moment, what we call longitudinal aerodynamic coefficient, effects airplanes directly, so the method to find the accurate result quickly is an important factor from the beginning of the aircraft design. There are different ways to find aerodynamic coefficient such as empirical methods, numerical analysis methods, wind tunnel tests, and finally through an actual flight tests, but choosing the best methods depends on the due date or the cost. The accuracy varies on each design level, but all this methods have relationship to complement and balance each other, so by combining proper methods, the best result can be obtained. At this paper, empirical methods and numerical analysis method were experimented, compared, and reviewed to find the availability of each method and by combining two methods accurate result was obtained. So, we applied this methods to predict the aerodynamic coefficient on cruise configuration aircraft, and was able to obtain more accurate result on the low speed longitudinal aerodynamic coefficient. Also by watching there result, we are able to predict the errors before the actual wind tunnel test.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.3
• /
• pp.176-184
• /
• 2007

The objective of this paper is to suggest a nonlinear analysis process to predict the structural behavior and strength of composite basement wall member combined with H-Pile. Therefore, the structural behavior of composite basement wall is studied and the special nonlinear characteristics of each elements such as H-Pile, concrete wall, and shear connectors are idealized using ATENA program. Finally, the result is compared with previous test result. Research result shows that there is a good co-relation between analysis and test results even if analysis result has little bit higher initial stiffness than test result. It can be concluded that the nonlinear behavior of composite basement wall is suitably predicted by using the contact element model in ATENA program as shear connector element.

• Korean journal of food and cookery science
• /
• v.12 no.2
• /
• pp.129-137
• /
• 1996

The purpose of this study was that to estimate the microbial and sensory quality by the method and time of holding in the step of holding of Cow's Knee Broth, Stir-Fry Pork and Cooked Cuttlefish that were provide at the industry foodservice establishment, then to suggest safer feeding by the reasonable holding method. The results are as follows: Cow's Knee Broth: holding at room temperature was shown that the number of mi- crobiology by passage of the holding time was higer than the case of holding at steam table, but it was lower after reheating it. As a result of sensory test, it was exellent to holding at steam table and to reheat after holding room temperature within four hours and six hours each. Stir-Fry Pork: as a result of microbial analysis, in the case of holding at the steam table microbes increased safer two hours, but after four and six hours they little reduced. In the case of holding at room temperature the number of microbes increased according to the passage of time. As a result of sensory analysis, its taste of room temperature holding was fine until four and six hours each. Cooked Cuttlefish: as a microbial analysis, it was shown that the amount of total plate counts of room temperature holding ten times as high as the latter after six hours. As the result of sensory analysis, the cold holding was better until six hours and the room temperature holding was fine just until two hours. As a result of food poisoning bacteria, it was negative in every test in sample against Salmonella, Staphylococcus aureus, Vibrio parahaemolyticus.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.2
• /
• pp.1-8
• /
• 2013

This study was performed for the purpose of analyzing the effect of tide on the stress-strain behavior in the boundary surface of sea dike embankment. Tide is a dynamic condition, but there are not suitable numerical models to solve the dynamic embankment condition caused by tide. So the analysis was simplified to quasi dynamic as follow. First, seepage by tide was analyzed according to elapsed time, and the results of the analysis at every hour during one periodic cycle time of 12 hours were applied to the pore water pressure conditions of stress-strain analysis with hyperbolic model by Duncan and Chang. The place at which maximum shear strain took place in the analysis result moved up and down repeatedly along the boundary of the dredged sand fill section and the crashed stone filter section. The value of maximum shear strain was large at high water level of tide. This result means that contraction and relaxation occur in turn repeatedly at every specific position along the boundary, and the repeated action compact loose position with sand moved down from the upper position by gravity. The experiment with the small sea dike model showed the result consistent with the numerical analysis. The surface of sea side on the dike collapsed at high water level after a couple of repetition of the rising and falling of water.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.10
• /
• pp.41-49
• /
• 2013

There is a wide variety of system and applications in the power system. However, they have compatibility issues because they use different data standard and communication method. With the introduction of the smart grid, power system has been grow and diversified. Therefore power system need to be compatible with each other and the interoperability between applications is increasingly important. Thus, the IEC established IEC61970 and CIM Standard data exchange model for interoperability and system integration. Server-Client system was constructed which using CIM HSDA(Part4), a standard communication model, presented in IEC 619710. Also, self-developed real-time voltage stability analysis application and contingency analysis application was used. CIM HSDA was used for data input and real-time analysis. Tolerance of result which is in the range of allowable derived by Perform real-time voltage stability and contingency analysis of Jeju power system, and then compare it's result with PSS/E result.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.28 no.5
• /
• pp.58-67
• /
• 2000

This study is mainly focus on the satisfaction degree of programs which were been held in city park. The case study of this study is Tokyo metropolitan city park which planed programs and have managed them for approximately 20 years. For the purpose, this study used the questionnaire about the satisfaction degree of programs in 2 Tokyo metropolitan city parks which are held nature observation programs, after analysis of programs of city parks. This study used analysis method of cross-tab, factor analysis and multi-regression. The result are as follows: 1. As the result of factor analysis, 6 factors which are determined the satisfaction degree of programs are found. Also as the regression result between satisfaction degree and 6 factor, the satisfaction degree is positively affected by first factor which is identified program contents and forth factor which is identified marketing part of program. 2. On the organization of managing program, the sponsorship privately-managed citizen group is more favorable than the sponsorship by volunteer. 3. In the participant attribute, participants who are older than 50 showed high distribution, and there is no difference between sex.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.1
• /
• pp.76-81
• /
• 2012

Ultrasonic metal welding is one of the welding methods which welds metal by applying high frequency vibrational energy into specific area at constant pressure, avaliable in room temperature and low temperature. Ultrasonic metal welder is consisted of power supply, transducer, booster, and horn. Precise designing is required since each parts' shape, length and mass can affect driving frequency and vibration mode. This paper focused to horn design, its length L was set to 62mm by calculating vibration equation. By performing modal analysis with various shape variable b times integer, when length of b is 30mm the output was 39,599Hz at 10th mode. Also by performing harmonic response analysis, the frequency response result was 39,533Hz, which was similar to modal analysis result. In order to observe the designed horn's performance, about 4,000 voltage data was obtained from a light sensor and was analyzed by FFT analysis using Origin Tool. The result RMS amplitude was approximately 8.5${\mu}m$ at 40,000Hz, and maximum amplitude was 12.3${\mu}m$. Therefore, it was verified that the ultrasonic metal welding horn was optimally designed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.264-270
• /
• 2011

The goal of this study is a stability evaluation through eigenvalue and rotor dynamics analysis of the vacuum pump. The vacuum pump used is a roots type pump, one of the dry middle vacuum pumps, is necessary at the procedure to produce semiconductor and display. The eigenvalue evaluation is solved by numerical analysis through using Modal test and 2D 3D models. Both the experiment and the analysis result are similar, the analysis result using 2D is more oculate the 3D model comparing with test result. So rotor dynamic evaluation is performed through using 2D model. Rotor dynamic evaluation used the campbell diagram and root locus map which were acquired by complex eigenvalue analysis. And we checked minimum clearance of vacuum pump composition between two rotors through unbalance response analysis. Thus, vacuum pump, the target object of this study, was evaluated to be operated stably.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.43 no.4
• /
• pp.69-78
• /
• 2001

In this study optimal analysis of pipe network was performed using linear and non linear analysis method for complex real pipe network system of Mungyeong water purification field system which consists of 70 nodes and 86 elements. From the examination result of total flow which is distributed to each pipe, it is found that KYPIPE2 Model supplies less amount than NLAM. It is known that dynamic water level and pressure head of KYPIPE2 Model and NLAM are nearly in accordance with each other from each method of the pipe network analyses, and appeared that both methods of analysis shows high reliable result since the distribution of dynamic water level for every node is the short range of EL. 205.0m~EL. 210.0m besides the pressed dynamic water level. The analysis results of pressure in the methods of pipe network analysis for KYPIPE2 Model and NLAM are similar and it is satisfactory result that the pressure distributions of the tab water design criterion of 5.0kgf/cm$^2$ besides the small part of highland.