• 동력기계공학회지
• /
• 제2권1호
• /
• pp.80-85
• /
• 1998

Engineering plastics have been magnified its usability due to its outstanding mechanic al, electrical and chemical properties, for example, in the area of computer, electricity, electronics, automobile, camera industry. In recent, automobile speedometer system is changing from manual operation to motor operation. All plastic gears inserted by metal shaft are used In motor operated speedometer system. Therefore, in this research, experimental investigation of the shrinkage phenomenon was executed according to various inserted depth and injection conditions. In experiments, the inserted depth was controlled as 30% and 90% of the total thickness of the plastic gear. The main parameters of injection process were selected as injection pressure, holding pressure, melt temperature, injection rate. As main results, free shrinkage rate of the test part is increased about 4 times to restricted shrinkage rate and shrinkage phenomenon against all injection conditions have a trivial effect on the test parts as conventional parts.

• 한국구조물진단유지관리공학회 논문집
• /
• 제13권3호통권55호
• /
• pp.188-196
• /
• 2009

콘크리트는 초기재령에 있어서 수분의 증발 및 이동으로 소성 및 건조수축 등의 수축현상이 발생한 다. 국내에서는 아령형 구속건조수축몰드를 활용한 콘크리트의 건조수축 균열 평가방법을 KS에서 규격화하여 활용하고 있으나 이는 균열발생시점 및 구속수축응력을 평가하는 방법으로 균열발생량에 관한 정량적 평가는 어려운 실정이다. 이에 본 연구에서는 콘크리트의 수축변형거동 및 균열발생량에 대한 정량적 데이터를 확보하기 위하여 판상-링형 구속시험방법을 개발하고 시험체 치수가 콘크리트의 수축균열에 미치는 영향을 검토하여 판상-링형 구속시험방법의 최적 시험체 치수 도출 및 수축균열특성에 관한 정량적 평가방법을 제안하고 그 적용성을 검증하고자 한다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.431-436
• /
• 2002

In this paper, to seek a solution of reducing autogenous shrinkage three types of bar restricted concrete specimens which have similar compressive strength were tested. The three type of concrete were plain concrete-P25 type, $10^{\circ}C$ fly-ash replaced concrete-F10 type, and $1^{\circ}C$ expansion admixture replaced concrete-SP1 type, and with the test result an experimental study was conducted to gain the tensile stress of concrete. From the result of P25, SP1, F10 tests, it was found that by the age of 14 the ratios of tensile stress to tensile strength of three specimens are $75^{\circ}C$, $47^{\circ}C$, $52^{\circ}C$ respectively. so we came to a conclusion that the SP1-type concrete has better capacity to reduce autogenous shrinkage than F10-type concrete at similar compressive strength condition.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.112-118
• /
• 1999

Shrinkage behavior was investigated to obtain more accurate dimensions of injected molding parts for free and restricted shrinkage conditions. various parameters for metal inserted injection process, such as thickness of resin, holding pressure and time, mo이 temperature and restriction condition of mold, were considered for the analysis of shrinkage phenomena. For numerical analysis, MOLDFLOW software was used to find the deterministic parameters of filling time, temperature, pressure and holding time. Also , experimental shrinkage effects were measured through actual injection molding process and the resin thickness was under controlled as 3 mm , 5 mm, and 7mm for the shapes of plastic gear made of Polymide(PA) and Polyxymethlene(POM). The main parameters of these injection processes were found to be holding pressure, holding time and mold temperature in the case of metal inserted molding.

• Earthquakes and Structures
• /
• 제20권4호
• /
• pp.365-375
• /
• 2021

Rammed earth (RE) buildings have existed all over the world for thousands of years, and have gained increasing attention because of its sustainable advantages, however, the shrinkage cracks reduce its bearing capacity and seriously affect its durability and applicability. In this study, the shrinkage cracks test was carried out to investigate the effects of initial water content, proportion of sand and gravel, compaction degree, thickness and the additives (polypropylene fiber, cement and sodium silicate) of shrinkage cracks in RE buildings, ten groups of RE samples were prepared and dried outdoors to crack. Four quantitative parameters of geometrical structure of crack patterns were used to evaluate the development of cracks. The results show that the specimens cracking behavior and the geometrical structure of crack patterns are significantly influenced by these considered factors. The formation of crack can be accelerated with the increase of initial water content and thickness of specimen, while restricted with the increase of the compaction degree and the proportion of sand and gravel. Moreover, the addition of 1% polypropylene fiber, 10% cement and 0.5 volume ratio sodium silicate can significantly restrain the form and development of cracks. In RE construction, these factors should be considered comprehensively to prevent the harm caused by shrinkage cracks. Further works should be carried out to obtain the optimum dosage of the additives, which can benefit the construction of RE buildings in future.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.86-98
• /
• 2002

Defining the relationship between the quality of injection molded parts and the process condition is very complicate because of lots of factor are involved and each factor has a non-linearity. With the development of CAE(Computer Aided Engineering) technology, the estimation of volumetric shrinkage of injection mold parts is possible by computer simulation even though restricted application. In this research, Neural Network applied for finding optimal processing condition. The percent of volumetric shrinkage compared on each case and show neural network can be successfully applied selecting optimum condition not only within factor level but also between factor level.

• 산업경영시스템학회지
• /
• 제25권2호
• /
• pp.71-76
• /
• 2002

Defining the relationship between the quality of Injection molded parts and the process condition is very complicate because of lots of factors are involved and each factor has a non-linearity. With the development of CAE(Computer Aided Engineering) technology, the estimation of volumetric shrinkage of injection mold parts is possible by computer simulation in spite of restricted application. In this research, the Taguchi method md Neural Network are applied for finding optimal processing condition. The percent of volumetric shrinkage is compared on each case and shows neural network can be successfully applied.

• Journal of Nutrition and Health
• /
• 제6권4호
• /
• pp.23-36
• /
• 1973

This study was designed to compare the effect of dietary intakes on different quality protein & levels of caloric consumption supplemented by sugar at the level of 26% of total caloric intakes. 30 males and same number of females of Albino rats, aged 30-40 days were devided into following six groups, 5 rats each. ACO Group: Ad libitum, Casein, no sugar group ACS Group: Ad libitum, Casein, 26% sugar supplemented group RBO Group: 50% restriction,Bean, no sugar group RBS Group: 50% restriction, Bean, 26% sugar supplemented group RAO Group: 50% restriction, Anchovy, no sugar group RAS Group: 50% restriction, Anchovy, 26% sugar supplemented group The rats were kept in individual cage and given 6 different diet for 12 weeks. The result of this study were elucidated as follow. Body weight gained and organ weight showed no significant differences between sugar supplemented group and the others. It was noteworthy that the shrinkage of female sex organ supplemented by sugar in the diet showed lower degree than that of compared groups in this study. In other word, degree of shrinkage due to protein-caloric restriction was decreased by sugar supplementation. Nitrogen Metabolism and total nitrogen retention were not observed any significant differences between sugar supplemented group and the others. Dental caries showed higher incidence for sugar supplemented groups. Hematology and bone growth showed no differences in this study. The similar results on the metabolic effects concerned the above view Points were obtained in the different protein groups such as bean & anchovy as protein sources in the diet. Caloric restriction Produced a lower growth-rate, lower body weight and poorer long bone growth. But composition of bone ash, concentration of nitrogen, calcium and blood glucose, liver fats and liver water content maintenanced at the same levels of standard group.

• 콘크리트학회논문집
• /
• 제25권3호
• /
• pp.347-354
• /
• 2013

최근 천연모래의 부족으로 부순 잔골재가 널리 사용되고 있다. 우리나라에서는 부순 잔골재 중의 0.08 mm 이하 미립분을 7% 이하로 제한하고 있으며 이는 ASTM의 규정과 유사한 것이나 그 외의 다른 나라의 규정과 비교할 때 상당히 엄격한 규정이다. 또한 부순 잔골재 중에는 파쇄 시에 발생하는 0.08 mm 이하 미립분을 20% 정도 포함하게 되며 물로 씻어내는 일도 용이하지 않을 뿐 아니라 자원이용의 극대화를 위해서도 잔입자량 한도의 상향 조정 가능 여부에 대한 검토가 필요하다. 그래서 이 연구에서는 0.08 mm 이하 미립분에 대한 특성 및 콘크리트 품질에 미치는 영향에 대한 실험을 실시하였으며, 비교를 위하여 실트 및 점성토 중의 미립분을 사용한 실험을 병행하였다. 미립분에 대해 실험한 결과 메틸렌블루 값은 부순 잔골재 중의 석분에 비하여 실트 및 점성토 중의 미립분에 대한 값이 보다 크게 나타났으며 또한 메틸렌블루 값은 packing density 및 액성한계, 소성한계와 높은 상관관계를 가지는 것으로 나타났다. 콘크리트 실험에서 동일한 슬럼프를 얻기 위한 고성능 감수제의 소요량은 미립분의 대체 사용량 증가에 따라 커지며, 메틸렌블루 값이 큰 미립분을 사용할 때 보다 크게 나타났다. 한편 부순 잔골재 중의 미립분을 20% 이내에서 대체 사용한 경우, 고성능감수제를 사용하여 반죽질기를 같게 한 콘크리트의 압축강도와 인장강도는 거의 변화가 없었으며 콘크리트의 건조수축량도 큰 차이를 보이지 않았다. 그러나 실트 및 점성토 중의 미립분을 대체 사용한 경우는 콘크리트의 강도가 현저히 저하하고 건조수축량도 크게 증가하는 것으로 나타났다.

• Restorative Dentistry and Endodontics
• /
• 제30권6호
• /
• pp.450-460
• /
• 2005

본 연구에서는 복합레진의 중합수축시 와동의 형태, 접착층의 성숙도, 및 와동의 부피가 와동저의 접착면에 발생되는 중합수축응력에 미치는 영향을 평가하였다. 1급 와동 충전시의 응력발생을 모방하기 위해, 98개의 대구치를 $2\times2\times2$ 실험군에 무작위로 분배하고 교합면 상아질을 평탄하게 연마한 후, 복합레진 충전을 위한 몰드의 역할을 할 수 있는 구멍을 가진 iris를 올려놓고 복합레진을 bulk-filling법으로 충전하였다. 각각의 변수로서 와동 형태에 관하여는 iris 재질 (접착제를 도포한 상아질 iris: 높은 C-factor, Teflon 처리된 금속 iris: 낮은 C-factor), 접착층의 성숙도에 관하여는 2종의 접착제 (Scotchbond Multi-purpose와 Xeno III), 와동의 부피에 관하여는 iris내 구멍의 직경 (직경 1 또는 $3mm{\times}높이$) 5mm)을 달리하여 전단접착강도를 측정하였다 와동의 C-factor가 클수록, 접착층의 성숙도가 우수할수록 그리고 부피가 클수록 접착력은 유의하게 감소하였다. 복합레진이 중합될 때, 와동의 형태적 제한에 따라 레진-상아질 접착계면에 발생되는 중합수축응력은 접착이 우수할수록 복합레진의 부피가 클수록 증가되므로, C-factor를 정의할 때 와동의 형태뿐 아니라, 접착층의 성숙도와 복합레진의 부피도 함께 고려되어야 된다.