• Title/Summary/Keyword: Restoration technique

Search Result 653, Processing Time 0.028 seconds

Conservation Treatment and Production Technique of the Golden Crown (Treasure No. 339) Excavated from Seobongchong Tomb in Gyeongju (경주 서봉총 출토 금관(보물 339호)의 보존처리와 제작기법 연구)

  • Kwon, Yoonmi
    • Conservation Science in Museum
    • /
    • v.26
    • /
    • pp.83-182
    • /
    • 2021
  • This study summarized the results of the conservation treatment and investigation on the production method of the golden crown (Treasure No. 339) excavated from Tomb No. 129 (also known as Seobongchong Tomb) in Noseo-dong, Gyeongju-si, Gyeongsangbuk-do Province. The golden crown from Seobongchong Tomb was discovered during the excavations conducted by the Museum of the Government-General of Korea in 1926 during the Japanese colonial era. It is currently in the collection of the National Museum of Korea. A total of six Silla golden crowns have survived in Korea, among which the crown from Seobongchong Tomb is the only example with a dome-shaped hemispherical decoration attached with a bird ornament while otherwise showing the typical features of Silla crowns. The crown had been repaired following its excavation using metallic materials and adhesives, but due to the partial deformation and damage brought about by the repair materials, it required further conservation treatment. This article describes in detail the overall process of the conservation treatment and the restoration of the original form of the golden crown from Seobongchong Tomb, particularly the method of reinforcing the joints to secure the stability of the crown. It presents the characteristics of the crown's production as revealed in the investigation during the conservation treatment, and further analyzes the relationship of this crown from Seobongchong Tomb with other Silla crowns through a comparison of their production techniques. The investigation revealed that the crown was primarily decorated with golden sequins at the time of its production. At a later point some of the sequins in the upright ornament were replaced with comma-shaped jade beads and additional comma-shaped jade beads were added to the headband. In order to determine if such modifications to the decoration had occurred with other Silla crowns, the decoration of the six extant Silla golden crowns were investigated. The crown from Cheonmachong Tomb features traces of this same modification to the decoration and possesses other similarities with the crown from Seobongchong Tomb.

Transition of Rice Culture Practices during Chosun Dynasty through Old References. Ⅵ Fertilizing Practices (주요 고농서를 통한 조선시대의 도작기술 전개 과정 연구 Ⅵ. 시비기술)

  • Lee, Sung-Kyum;Guh, Ja-Ok;Lee, Eun-Woong;Lee, Hong-Suk
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.37 no.2
    • /
    • pp.209-215
    • /
    • 1992
  • Different from 'Seyokwiryang' (歲易爲良 : fallowing as the best method) which was an agricultural technique of ancient China, fertilization of rice fields was already practiced in the end of Koryo age in Korea. 'Bunjongbeob'(糞種法 : fertilizer applicating method on seed) or 'Bunkwabeob' (糞科法 : fertilizer applicating method on each plant) was practiced before green manure of bean crops and 'Bunjeonbeob'(糞田法 : fertilizer practicing method on fields) were done. In the 15th century 'Dojeonbunjeonbeob'(稻田糞田法 : fertilizer applicating method on paddy) in 'Jikseol' was divided the materials to be used into the soil brought from another place, trees, grasses, and the manure. Also, it discribed the fertilization between first plowing and the second, and proper fertilization for particular soil conditions. In case of transplanting techniques, the fertilization practices were specified into nursery and rice fields, and restoration of organic matter was systemized by plowing for cultivation in the reclaimed areas. In the 17th century, through 'Jikseolbo'($\ulcorner$直說補$\lrcorner$), the habitual practice of Kyungsang province was systemized and 'Bunyangsool'(糞壤術 : technique of fertilization) of 'Jodoangkicheo' (早稻秧基處 : rearing fields of early-ripening rice) was completed. Specific things was the manufacturing and utilizing techniques of 'Bunhoe'(糞灰 : mixture of manure and ash), 'Yohoe'(尿灰 : mixture of urine and ash), and additional fertilizers. In the 18 to 19th century, the materials of fertilization were greatly enlarged to recover the waste lands and to support the reinforcement of soil fertility for increasing the system of two cropping a year. Also, 'Jeobunbeob'(貯糞法 : method of manure storage) and additional fertilization were emphasized, and use of wagons for it was emphasized to improve the theory of fertilization and working efficiency. As mentioned above, limitation of fertilizing materials was conquered by 'Dojeonbunyang'(稻田糞壤 : techniques of practicing fertilizers in paddy) and the system of additional fertilization was established. The fertilization methods were improved with 'Jeobunbeob' due to the theory and recognition necessary for high rates of fertilizers.

  • PDF

Future of Social Work Practice - Human, human again. - (사회복지실천의 미래 - 사람과 사람 -)

  • Kim, Miok;Choi, Hyeji;Chung, Ick-Joong;Min, So-young
    • Korean Journal of Social Welfare
    • /
    • v.69 no.4
    • /
    • pp.41-65
    • /
    • 2017
  • This study aimed to examine the social transition, which is often metaphorized as the Fourth Industrial Revolution, within the context of social work practice and to explore measures to improve social work practice in such transition. Four social welfare researchers held seven discussions to predict the social changes in the near future centered on the Fourth Industrial Revolution and find the corresponding development strategies in social work practice; collective autobiography method was used to analyze the discussion. The analysis ascertained hyper connectivity, the advent and expansion of new communities, diversification and individualization, and the emergence of new criteria for the assessment of one's quality of life as the distinctive qualities of the near future. It was analyzed that humans and organic materials will be interconnected through spatial and temporal transcendence and that humans liberated from labor will seek for diverse communities while the number of atomized individual will increase simultaneously. Furthermore, the rise of new order of life accompanied by both the expansion of diversification and individualization and the ecological worldview brought forth by post materialistic trend was predicted. Meanwhile, the disengagement from macroscopic context, a biased inclination towards technique orientated professionalism, and individualistic social work practices without integrity were identified as the limitations of the current social work practice. This study presented three goals for social work practice to help it overcome its current shortcomings and correspond to the social changes: first, the rearrangement of practice knowledge, technique, and value so that it is based on humans and society, which are the essence of social practice work; second, the practice, such as sharing economy, that expands the individuals' boundaries of life to the community; three, the restoration of the desirability of professional social works by examining its special nature.

A Study of Anomaly Detection for ICT Infrastructure using Conditional Multimodal Autoencoder (ICT 인프라 이상탐지를 위한 조건부 멀티모달 오토인코더에 관한 연구)

  • Shin, Byungjin;Lee, Jonghoon;Han, Sangjin;Park, Choong-Shik
    • Journal of Intelligence and Information Systems
    • /
    • v.27 no.3
    • /
    • pp.57-73
    • /
    • 2021
  • Maintenance and prevention of failure through anomaly detection of ICT infrastructure is becoming important. System monitoring data is multidimensional time series data. When we deal with multidimensional time series data, we have difficulty in considering both characteristics of multidimensional data and characteristics of time series data. When dealing with multidimensional data, correlation between variables should be considered. Existing methods such as probability and linear base, distance base, etc. are degraded due to limitations called the curse of dimensions. In addition, time series data is preprocessed by applying sliding window technique and time series decomposition for self-correlation analysis. These techniques are the cause of increasing the dimension of data, so it is necessary to supplement them. The anomaly detection field is an old research field, and statistical methods and regression analysis were used in the early days. Currently, there are active studies to apply machine learning and artificial neural network technology to this field. Statistically based methods are difficult to apply when data is non-homogeneous, and do not detect local outliers well. The regression analysis method compares the predictive value and the actual value after learning the regression formula based on the parametric statistics and it detects abnormality. Anomaly detection using regression analysis has the disadvantage that the performance is lowered when the model is not solid and the noise or outliers of the data are included. There is a restriction that learning data with noise or outliers should be used. The autoencoder using artificial neural networks is learned to output as similar as possible to input data. It has many advantages compared to existing probability and linear model, cluster analysis, and map learning. It can be applied to data that does not satisfy probability distribution or linear assumption. In addition, it is possible to learn non-mapping without label data for teaching. However, there is a limitation of local outlier identification of multidimensional data in anomaly detection, and there is a problem that the dimension of data is greatly increased due to the characteristics of time series data. In this study, we propose a CMAE (Conditional Multimodal Autoencoder) that enhances the performance of anomaly detection by considering local outliers and time series characteristics. First, we applied Multimodal Autoencoder (MAE) to improve the limitations of local outlier identification of multidimensional data. Multimodals are commonly used to learn different types of inputs, such as voice and image. The different modal shares the bottleneck effect of Autoencoder and it learns correlation. In addition, CAE (Conditional Autoencoder) was used to learn the characteristics of time series data effectively without increasing the dimension of data. In general, conditional input mainly uses category variables, but in this study, time was used as a condition to learn periodicity. The CMAE model proposed in this paper was verified by comparing with the Unimodal Autoencoder (UAE) and Multi-modal Autoencoder (MAE). The restoration performance of Autoencoder for 41 variables was confirmed in the proposed model and the comparison model. The restoration performance is different by variables, and the restoration is normally well operated because the loss value is small for Memory, Disk, and Network modals in all three Autoencoder models. The process modal did not show a significant difference in all three models, and the CPU modal showed excellent performance in CMAE. ROC curve was prepared for the evaluation of anomaly detection performance in the proposed model and the comparison model, and AUC, accuracy, precision, recall, and F1-score were compared. In all indicators, the performance was shown in the order of CMAE, MAE, and AE. Especially, the reproduction rate was 0.9828 for CMAE, which can be confirmed to detect almost most of the abnormalities. The accuracy of the model was also improved and 87.12%, and the F1-score was 0.8883, which is considered to be suitable for anomaly detection. In practical aspect, the proposed model has an additional advantage in addition to performance improvement. The use of techniques such as time series decomposition and sliding windows has the disadvantage of managing unnecessary procedures; and their dimensional increase can cause a decrease in the computational speed in inference.The proposed model has characteristics that are easy to apply to practical tasks such as inference speed and model management.

ELASTIC CONSTANTS, SHEAR BOND STRENGTH OF TUNNEL RESTORATIVE MATERIALS AND MARGINAL RIDGE STRENGTH OF RESTORED TEETH (터널형 2급와동 충전재의 탄성계수와 전단결합강도 및 수복치의 변연융선 파절강도에 관한 연구)

  • Lee, Ka-Yean;Park, Yeong-Joon;Yang, Kyu-Ho
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.23 no.3
    • /
    • pp.746-763
    • /
    • 1996
  • An alternative design to conventional class II cavity preparation for proximal carious lesions is the tunnel preparation. It preserves the marginal ridge intact, thus making it possible to maintain the natural contact relationship with the adjacent tooth and minimize tooth reduction. This in vitro study was purposed to evaluate the effect of the materials' elastic constants and shear-bond strength on the marginal ridge fracture resistance of teeth restored by the tunnel technique, and to find the materials of choice for tunnel restorations. $Resinomer^{(R)}$, $Ketac-silver^{(R)}$, $Miracle-Mix^{(R)}$, and Tytin were used as restorative material. The elastic constants of each restorative material were evaluated by ultrasonic pulse measurement. Young's modulus and bulk modulus of the restorative materials were evaluated in three specimens for each material type. The shear-bond strength of the restorative materials to the dentin surface was measured after thermocycling 400 times between 6 and $60^{\circ}C$, using ten specimens for each material type. For measuring marginal ridge strength, 60 sound extracted molar teeth were distributed into six groups by size. Sound molar teeth were used as a Control group and unfilled prepared teeth were grouped as Unrestored. Another four groups were named Resinomer group, Ketac-Silver group, Miracle Mix group, and Tytin group by type of restorative material. Tunnel cavity preparation was done with ' 1/2, 2, and 4 round burs in sequence. Initial access to proximal surface was made through an occlusal access preparation started at least 2mm from the marginal ridge, and the proximal opening was formed about 2.5mm below the marginal ridge. After restoration and thermocycling, marginal ridge strength was measured using a universal testing machine. The results were as follows: 1. The Young's modulus of $Tytin^{(R)}$ was 63.95 GPa, followed by $Ketac-Silver^{(R)}$ 27.60 GPa, $Miracle-mix^{(R)}$ 18.48 GPa, and $Resinomer^{(R)}$ 10.74 GPa showing significant differences between the groups(P<0.05). The bulk modulus of the materials showed the same order as Young's modulus. The value of $Tytin^{(R)}$ showed 59.57 GPa indicating that it will deform less than other materials under the same stress. It was followed by $Ketac-Silver^{(R)}$ 23.57 GPa, Miracle $Mix^{(R)}$ 12.50 GPa, and $Resinomer^{(R)}$ 11.60 GPa. 2. The Resinomer group had a shear-bond strength of 7.41 MPa which was significantly higher than those of the Ketac-Silver group (1.80 MPa) and the Miracle Mix group (2.84 MPa) (P<0.01). All the specimens of Tytin group detatched from the dentin surface during thermocycling. 3. The mean marginal ridge strength of the Unrestored group(46.14 kgf) was significantly lower than that of the Control group (84.24 kgf) (P<0.01). The marginal ridge strength of teeth restored by the tunnel technique was, in order, Ketac-Silver group 74.06 kgf, Miracle Mix group 73.36 kgf, Resinomer group 63.47 kgf, and Tytin group 58.76 kgf. The Ketac-Silver, Miracle Mix, and Resinomer groups showed no significant difference with the Control group (P>0.05), but the Tytin group showed significantly lower strength compared to the Control group(P<0.05). The results showed that the marginal ridge strength of the teeth restored by the tunnel technique was not significantly lower than that of sound teeth. They also demonstrated that the bonding strength of the restorative material to the tooth surface should be high and the modulus of elasticity should not be lower than that of the tooth in order to restore the marginal ridge strength to its natural condition.

  • PDF

Interpretation of Material Provenance and Production Techniques of Pottery and Kilns from Gundong and Majeon Sites in the 3rd Century at Yeonggwang, Korea (영광 군동.마전 원삼국시대 토기와 가마의 제작특성 및 태토의 산지해석)

  • Jang, Sung-Yoon;Lee, Gi-Gil;Moon, Hee-Soo;Lee, Chan-Hee
    • Journal of Conservation Science
    • /
    • v.25 no.1
    • /
    • pp.101-114
    • /
    • 2009
  • Potsherds and kilns of the AD 3th century excavated from Gundong and Majeon sites, Korea were studied to investigate the production techniques and provenance of potsherds and kilns on the pastes. For potsherds, kilns blocks and in-situ paleo-soils, provenance of raw materials were estimated through mineralogy and geochemistry, while production technique and thermal feature of kilns were investigated through observation of textures and compositions as well as firing experiment on paleo-soils. As a result of study, potsherds and kilns were found to have similar mineralogical compositions as the neighboring paleo-soils and to have same evolution path with that of geochemistry. The potsherds were divided into 3 groups according to firing temperature and production technique. Group 1 consists of reddish stamped pattern pottery with loose textures, which has many pores and contains many iron oxides. Its temper is less than about 0.5mm, and was probably fired between 700 to $800^{\circ}C$. Group 2 contains ash to grayish blue stamped pattern pottery, which has vitrified texture and few pores. Its temper is less than about 0.5mm, and was probably fired from 900 to $1,000^{\circ}C$. However, some potsherd belongs to the group 2 in terms of features for temper and pastes, but it was probably fired over $1,100^{\circ}C$. Group 3 contains reddish and grayish stamped pattern pottery. It has vitrified matrix, few pores and temper consists of polycrystalline quartz and feldspar over 2mm, and it was probably fired around $1,000^{\circ}C$. The kiln had experienced temperature from 600 to $700^{\circ}C$ on the wall, from 900 to $1,000^{\circ}C$ on the bottom, suggesting the function of high temperature firing.

  • PDF

The Effects of Leukocyte Depleted Priming Solution on the Gastric Mucosal $Co_{2}$ Partial Pressure and Serum IL-8 Level during Cardiopulmonary Bypass in Korean Mongrel Dogs (한국산 잡견에서 백혈구 제거 충진액이 체외순환 중 위점막 이산화탄소 농도와 IL-8 수준에 미치는 영향)

  • Park Kuhn;Lee Jong Ho;Kim Jin Ho;Jin Ung;Kwon Jong Bum;Kim Chi Kyeong;Wang Young Pil
    • Journal of Chest Surgery
    • /
    • v.38 no.12 s.257
    • /
    • pp.807-814
    • /
    • 2005
  • Background: Cardiopulmonary bypass is an essential process to maintain circulation for saving life during the cardiac surgery, But it is a process in which systemic inflammation was evoked inevitably because of the exposure of blood to foreign surface. The injuries to distal organs during the cardiopulmonary bypass were resulted from systemic inflammation and the disturbances of micro-circulations in the organs. We designed this study to research the effects of leukocyte depletion from pump-oxygenator priming solution on the systemic inflammation, and the micro-circulation of gastric mucosa that is suggested by the gastric mucosal $CO_{2}$ partial pressure and acidity. Material and Method: The dogs were divided into three groups according to the different pump-oxygenator priming solutions; non-hemic crystalloid solution; leukocyte-depleted homologous blood; and non leukocyte-depleted homo-logous blood. Each priming solution group contained five dogs. In all three groups, 2 hours of cardiopulmonary bypass, and 4 consecutive hours of general anesthesia was maintained on the mechanical ventilation. Each dog was evaluated for the gastric mucosal pH, $CO_{2}$ partial Pressure, arterial pH, $CO_{2}$ partial pressure, the exhaled air $CO_{2}$ partial pressure and the level of IL-8 on before the cardiopulmonary bypass, 1 hour after the cardiopulmonary bypass, 2 hours after the cardiopulmonary bypass, 2 hours after the restoration of normal circulation, and 4 hours after the restoration of normal circulation after the cardiopulmonary bypass. The levels of IL-8 were measured with ELISA (enzyme linked immunosorbent assay) technique. Result: 1. There were significant differences of gastric mucosal $CO_{2}$ partial pressure between the leukocyte-depleted homologous blood group and other two groups(vs non leukocyte-depleted homologous blood group; P=0.02, vs non-hemic crystalloid solution group; P=0,01). 2. The gastric mucosal pH of leukocyte-depleted homologous blood group was significantly different from non leukocyte-depleted homologous blood group (p=0.01). 3. The levels of IL-8, which examine the systemic inflammation, showed signi- ficantly better results in leukocyte-depleted homologous blood group and non-hemic crystalloid solution group than non leukocyte-depleted homologous blood group (p=0.01, 0.01). Conclusion: Based upon these results, we concluded that the leukocyte depletion from the pump-oxygenator priming solution has a beneficial effects in reducing systemic inflammation and the preserving of gastric mucosal micro-circulation.

Evaluation of Cavity Wall Adaptation of Bulk-fill Resin Composites in Class II Cavities of Primary Molar (유구치 2급 와동에서 bulk-fill 복합레진의 와동적합성 평가)

  • Bae, Youngeun;Shin, Jonghyun;Kim, Shin;Jeong, Taesung;Kim, Jiyeon
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.44 no.4
    • /
    • pp.446-454
    • /
    • 2017
  • Recently, there have been many studies on bulk-fill resin composites. However, studies on the proper materials for pediatric patients are rare. The aim of this study was to compare the cavity wall adaptation of bulk-fill resin composites with conventional resin composite in class II cavities of primary molars using microcomputed tomography (micro-CT). Standardized class II slot cavities were prepared in 80 exfoliated primary molars and randomly divided into 4 groups. The control group was restored with conventional resin composite, Filtek Z-350 XT (FZ), and the three groups were restored with bulk-fill resin composites, Filtek bulk-fill posterior (FB), Tetric N-Ceram Bulk Fill (TNC), Filtek bulk-fill flowable (FBF). All specimens were thermocycled and then immersed in 50% silver nitrate ($AgNO_3$) solution. Micro-CT was used to measure the penetration volume of the total silver nitrate and the degree of cervical marginal leakage and the number, size, and position of the voids were evaluated. The results revealed that the volume of silver nitrate were significantly different between FB and FZ (p < 0.05). The results also revealed that the penetration length of silver nitrate FBF showed statistically lower than the FZ and FB (p < 0.05). There was no significant difference between the groups in number and size of voids. In conventional resin composite, most of the voids were present inside the restoration (83.3%), but the voids in the bulk-fill resin composites incidence were higher in the gingivoaxial angle. The cavity wall adaptation demonstrated in class II restorations of primary molar by new bulk fill resin composites was similar to conventional incremental technique. Bulk-fill resin composites might be an clinical option for a faster restoration in deciduous teeth.

Sprout Growth and Its Effects on Vegetation after Lumbering of Populus albaglandulosa (은수원사시나무 벌목 후 맹아의 생장과 맹아가 주변 식생에 미치는 효과)

  • Min, Byeong-Mee;Choi, Sun-Hee
    • The Korean Journal of Ecology
    • /
    • v.23 no.3
    • /
    • pp.223-229
    • /
    • 2000
  • To develop the restoration technique from urban planted forest to natural forest, sprout growth and its effects on vegetation composition in the early stage after lumbering, were studied, using only Populus albaglandulosa of the tree layer in Chungdam Park Chungdam-dong, Kangnam-gu, Seoul during the two years from 1997 to 1998. The results were as follow. After lumbering, the more basal areas of the parent stump, the more sprouts were generated. The basal area of parent stump was related more to biomass than to the number of sprouts. In the cutting area, biomasses of sprouts were 552.7 g?DW/㎡ in first year and 8.7 g?DW/㎡ in second year after lumbering. Therefore, cutting of sprouts in first year resulted in decrease of sprout production in second year. In the non-cutting area, biomass of sprouts was 657.4 g?DW/㎡ and more than that of the experiment. Especially, 2-year sprouts grew to a 304 cm height by the end of the growing season in the second year. The growing season of sprouts was from early April to early September and almost all the leaves of the sprouts remained at the end of the growing season. Specific leaf area decreased along with time elapse and plant height but the differences were not conspicuous. Therefore, it is thought that the reason why p. albaglandulosa sprouts grew fast was due to a long growing period and lower layer leaves which remained at the end of the growing season. In the cutting area of the P. albaglandulosa sprouts, there were no changes in the number of species in the shrub layer but an conspicuous increase in the herb layer. Coverage was no changes in the shrub layer but an increase in the herb layer. In the non-cutting area of P albaglandulosa sprouts, the number of species and the coverage changed a little, and the main species of the herb layer were Phytolacca americana, Eupatorium rugosum and Panicum dichotomiflorum, which are tall plant species.

  • PDF

EFFECT OF C-FACTOR AND LAYERING TECHNIQUE ON THE CONTRACTION FORCE OF COMPOSITE RESIN RESTORATION TO TOOTH SURFACE (C-factor와 충전법이 복합레진의 중합 수축에 의한 치질에서의 수축 응력에 미치는 영향)

  • Lee, Bong-Kyu;Lee, Nan-Young;Lee, Sang-Ho
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.33 no.2
    • /
    • pp.233-243
    • /
    • 2006
  • The aim of this study was to investigate the relationship between the C-factor and shrinkage strain values of composite resin and examine the strain values in different incremental filling techniques. Experiment consisted two aims. First, we compared with strain value in two different C-factors(3.7 and 1.0). Second, we examined the strain values in three different filling techniques. The results of the present study can be summarized as follows : 1. High C-factor groups showed higher contraction stress values than low C-factor groups at 900 sec after polymerization. 2. Hybrid resin showed higher contraction stress values than flowable resin in high C-factor cavities. But contraction stress was not revealed significant difference between hybrid resin and flowable resin in low C-factor cavities (P>0.05). 3. Bulk felling with hybrid resin(Group 1) showed high contraction stress and lining with flowable resin followed hybrid resin (Group 5) showed lower contraction stress. 4. Contraction stress were increased during 900 sec after polymerization in high C-factor groups but decreased gradually after 900 sec. 5. Low C-factor groups showed tight marginal seal between resin and cavity wall but high C-factor groups showed gaps formed between resin and cavity wall in part. On the basis above results, layering techniques in high C-factor cavity showed advantages in reducing contraction stress and gap formation between cavity wall and resin restoration.

  • PDF