• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권5호
• /
• pp.429-438
• /
• 2007

Transport distraction osteogenesis has been introduced recently to correct skeletal malformations and discrepancies in the maxillofacial area. To reconstruct 3-dimensitonal mandibular shape, this transport distraction can be considered with the use of reconstruction plate. A 23-years-old male having unilateral mandibular body and angle defects, who had been operated of partial mandibular resection due to unicystic ameloblastoma, was treated by transport distraction procedures with ThreadLock transport $distractor^{(R)}$ (KLS Martin Co., Germany) through the rail of reconstruction plate (Osteomed Co., USA). After being distracted 35 mm defect from mandibular angle to body, and consolidated for 16 weeks, allogenic bone graft on docking site was performed with removal of transgingival pin. For more than 13 weeks follow up period after consolidation period, gradual increase of radiopacity in the radiographic examination was shown, and the curved mandibular continuity according to the reconstruction plate was made firmly. These transport distraction osteogenesis in the mandible was able to be considered as the good and minimally invasive technique for the reconstruction of mandibular discontinuity. Young patient was also very satisfactory for these results.

• The Journal of Advanced Prosthodontics
• /
• 제7권6호
• /
• pp.454-459
• /
• 2015

PURPOSE. To determine whether the fracture strengths and failure types differed between metal and zirconia frameworks veneered with pressable or layering ceramics. MATERIALS AND METHODS. A phantom molar tooth was prepared and duplicated in 40 cobalt-chromium abutments. Twenty metal (IPS d.SIGN 15, Ivoclar, Vivadent, Schaan, Liechtenstein) and 20 zirconia (IPS e.max ZirCAD, Ivoclar) frameworks were fabricated on the abutments. Each framework group was randomly divided into 2 subgroups according to the veneering material: pressable and layering ceramics (n=10). Forty molar crowns were fabricated, cemented onto the corresponding abutments and then thermocycled ($5-55^{\circ}C$, 10,000 cycles). A load was applied in a universal testing machine until a fracture occurred on the crowns. In addition, failure types were examined using a stereomicroscope. Fracture load data were analyzed using one-way ANOVA and Tukey HSD post-hoc tests at a significance level of 0.05. RESULTS. The highest strength value was seen in metal-pressable (MP) group, whereas zirconia-pressable (ZP) group exhibited the lowest one. Moreover, group MP showed significantly higher fracture loads than group ZP (P=.015) and zirconia-layering (ZL) (P=.038) group. No significant difference in fracture strength was detected between groups MP and ML, and groups ZP and ZL (P>.05). Predominant fracture types were cohesive for metal groups and adhesive for zirconia groups. CONCLUSION. Fracture strength of a restoration with a metal or a zirconia framework was independent of the veneering techniques. However, the pressing technique over metal frameworks resisted significantly higher fracture loads than zirconia frameworks.

• Journal of Periodontal and Implant Science
• /
• 제37권2호
• /
• pp.287-295
• /
• 2007

As a general treatment modality of subgingival tooth defect in aethetic area, implant or crown and bridge therapy after extraction of affected tooth can be used. But as more conservative treatment, crown lengthening can be considered and not to lose periodontal attachment and impair aethetic appearance, surgical extrusion can be considered as a treatment of choice. In this case report, 3 cases of surgical extrusion was represented and appropriate time for initiation of endodontic treatment according to the post-surgical tooth mobility was investigated. In 8 patient who has subgingival tooth defect in aethetic area, intracrevicular incision is performed and flap was reflected with care not to injure interproximal papillae. With forcep or periotome, tooth was luxated and sutured in properely extruded position according to biologic width with or without $180^{\circ}$ rotation. 8 cases show favorable short and long term results. In some cases, surgical extrusion with $180^{\circ}$ rotation can minimized extent of extrusion and semi-rigid fixation without apical bone graft seems to secure good prognosis. In 8 cases, endodontic treatment started about 3 weeks after surgery. This time corresponds with the moment when mobility of extruded tooth became 1 degree and this results concide with other previous reports. If it is done on adequate case selection and surgical technique, surgical extrusion seems to be a good treatment modalilty to replace the implant restoration in aethetic area.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2010년도 학술발표회
• /
• pp.1058-1062
• /
• 2010

최근 하천정비 사업은 하천의 치수, 이수적인 기능뿐만 아니라 자연 친화적인 기능을 고려하여 하천을 조성하기 위한 노력들을 많이 하고 있다. 그 결과 기존 콘크리트 호안을 자연형 호안으로 바뀌어 생태계 복원 및 접근성을 높이고, 직선형 하도를 사행하는 자연형 하도로 바꾸는 등의 다양한 하천복원 사업들을 실시하고 있다. 하지만 하천복원에 따른 유지관리를 위한 하천복원공법들에 대한 모니터링과 복원사업에 대한 효과 분석이 제대로 이루어지지 못하고 있다. 따라서 하천복원 전, 후에 대한 모니터링과 평가를 위한 연구가 필요하다. 이에 본 연구에서는 2001년에 시작하여 2006년 12월에 복원 사업이 완료된 오산천 하천환경 정비사업에 적용된 복원 공법들의 수리학적 모니터링을 통해 복원 후의 효과 및 문제점들을 평가하였다. 우선 수리학적 모니터링의 일반적인 사항으로 강우량 및 홍수량 측정, 하상변동 분석, 하상재료 분석 그리고 항공영상 분석을 수행하였다. 또한 복원 공법에 대한 수리학적 모니터링은 호안의 수리학적 안정성 평가, 어도의 기능 평가, 저수로내에 설치된 인도교 주변과 목교의 수리학적 영향을 분석하였다. 모니터링 결과 복원 후 일부 목교 주변과 자연형 호안 중 일부는 침식되었으며, 하중도 하류부에는 퇴적이 발생한 것을 확인하였다. 금곡취수보에 설치된 어도는 자체안전성에는 문제가 없었으나, 어류 소상을 위한 기능을 다하지 못하는 것으로 확인되었다. 또한 상류 하천정비로 인해 하류에 퇴적이 많이 되어 있는 것을 확인하였다. 이와 같은 적용 공법별 수리학적 모니터링 결과는 복원 공법에 대한 모니터링 및 평가를 위한 지침서 작성을 위한 기초자료로 사용될 것으로 기대된다.

• Restorative Dentistry and Endodontics
• /
• 제43권2호
• /
• pp.22.1-22.9
• /
• 2018

Objectives: To evaluate and compare light-transmittance in dental tissues and dental composite restorations using the incremental double-layer technique with varying layer thickness. Materials and Methods: B1-colored natural teeth slabs were compared to dental restoration build-ups with A2D and B1E-colored nanofilled, supra-nanofilled, microfilled, and microhybrid composites. The enamel layer varied from 0.3, 0.5, or 1.2 mm thick, and the dentin layer was varied to provide a standardized 3.7 mm overall sample thickness (n = 10). All increments were light-cured to $16J/cm^2$ with a multi-wave LED (Valo, Ultradent). Using a spectrophotometer, the samples were irradiated by an RGB laser beam. A voltmeter recorded the light output signal to calculate the light-transmittance through the specimens. The data were analyzed using 1-way analysis of variance followed by the post hoc Tukey's test (p = 0.05). Results: Mean light-transmittance observed at thicker final layers of enamel were significantly lower than those observed at thinner final layers. Within 1.2 mm final enamel resin layer (FERL) thickness, all composites were similar to the dental tissues, with exception of the nanofilled composite. However, within 0.5 mm FERL thickness, only the suprananofilled composite showed no difference from the dental tissues. Within 0.3 mm FERL thickness, none of the composites were similar to the dental tissues. Conclusions: The supra-nanofilled composite had the most similar light-transmittance pattern when compared to the natural teeth. However, for other composites, thicker FERL have a greater chance to match the light-transmittance of natural dental tissues.

• 한국통신학회논문지
• /
• 제41권2호
• /
• pp.269-276
• /
• 2016

IoT(Internet of Things)는 무선 네트워크를 기반으로 다수의 사물 및 사람들을 연결시킬 수 있다. IoT 환경에서는 수많은 장비들에 데이터를 전달할 수 있는 신뢰성 있는 브로드캐스트가 중요하다. 주변 환경으로부터의 에너지 하베스팅은 지속 가능한 IoT 네트워크를 구성하기 위한 핵심 기술이다. IoT 네트워크에서 신뢰성 있는 브로드캐스트를 위해서는 패킷 손실 및 에너지 부족 문제를 완화해야 한다. 본 논문에서는 다수의 노드들이 존재하는 환경에서 패킷 손실과 에너지 소모를 고려한 에너지 효율적이고 신뢰성 있는 브로드캐스트 방법을 제시한다. 제안 방법을 통해 데이터 복원 확률을 최대 15% 증가시키고 에너지 소모를 최대 17% 감소시킬 수 있다.

• 정보처리학회논문지B
• /
• 제18B권1호
• /
• pp.1-10
• /
• 2011

가역 워터마킹 기법은 디지털 콘텐츠에 지각적 투명성을 유지하며 워터마크를 삽입한 후, 이를 아무런 손상없이 원본 상태로 복원할 수 있는 메시지 은닉 수단으로서 높은 품질과 높은 삽입용량이 요구되는 분야에서 다양하게 이용되어질 수 있다. 본 논문에서는 차이값 히스토그램 기반의 가역 워터마킹에서 응용분야의 요구에 맞게 높은 삽입용량을 제공하기 위한 효율적인 반복삽입 알고리즘을 제안한다. 제안한 방법에서는 메시지가 삽입된 영상에 대하여 반복삽입할 때, 지역성을 최대한 활용하기 위하여 행열 교차 스캐닝 방법을 이용하였다. 다양한 영상들에 대하여 비교 분석한 실험 결과에 따르면 제안한 알고리즘은 완전한 가역성과 함께 낮은 왜곡을 유지하면서도 효율적인 반복삽입을 통한 높은 삽입용량을 얻을 수 있었다.

• 한국미생물·생명공학회지
• /
• 제40권3호
• /
• pp.169-179
• /
• 2012

미생물에 의한 탄산칼슘침전은 생물 화학적으로 풍화, 침식된 시멘트 건축구조물 표면의 미학적 복원 및 수분침투 방지를 목적으로 응용되었다. 이 기술의 두드러진 장점이 보고된 후 유럽과 미국을 중심으로 미생물을 이용한 건축공학적 응용가능성에 대한 연구가 활발히 이루어져 왔다. 견고하고 원재료와의 호환성이 뛰어난 이 기술은 다양한 탄산칼슘형성세균의 선별 또는 배양 및 적용방법의 개발로 그 관심이 촉발되었다. 본 총설의 목적은 친환경적 건축소재에 대한 관심이 높아지고 그 필요성이 대두되고 있는 현 시점에서 미생물 탄산칼슘형성 매카니즘과 그 관련 기술들을 검토해 보고자 한다. 본론에선 시멘트 건축물 표면코팅 효과에 대한 방법론적 연구사례들을 조사하였고, 시멘트 구조물의 내구성 증진을 위한 미생물의 첨가에 대한 연구사례들도 함께 살펴보았다. 부가적으로 향후 미생물의 다기능성을 이용한 자기수복 스마트 콘크리트 개발에 대한 개념을 살펴보고 그 미래를 전망하였다.

• KIEAE Journal
• /
• 제17권5호
• /
• pp.95-100
• /
• 2017

Purpose: The purpose of this study is to investigate the prior art based on deep learning to objectively calculate the metabolic rate which is the subjective factor for the PMV optimum control and to make a plan for future research based on this study. Methods: For this purpose, the theoretical and technical review and applicability analysis were conducted through various documents and data both in domestic and foreign. Results: As a result of the prior art research, the machine learning model of artificial neural network and deep learning has been used in various fields such as speech recognition, scene recognition, and image restoration. As a representative case, OpenCV Background Subtraction is a technique to separate backgrounds from objects or people. PASCAL VOC and ILSVRC are surveyed as representative technologies that can recognize people, objects, and backgrounds. Based on the results of previous researches on deep learning based on metabolic rate for occupational metabolic rate, it was found out that basic technology applicable to occupational metabolic rate calculation technology to be developed in future researches. It is considered that the study on the development of the activity quantity calculation model with high accuracy will be done.

• 보존과학연구
• /
• 통권23호
• /
• pp.41-57
• /
• 2002

It has been proved that pollutants stuck on the surface of stone architecture have significant direct and indirect harmful effects on them. Among them some do not look evidently harmful, but they have potentials to ruin stone architecture as time goes on. Since the cultural assets have magnificent meanings as historical aspects, their future states should be considered seriously as well as that of the presence. The past method to get rid of the pollutants from the surface of cultural properties has been changed a lot till the present along with scientific development of technology on this field. Existing method to eliminating pollutants are based on physical and chemical processing, which can make damages on them too. Recently cleansing using LASER has been developed in Europe and proved as effective and relatively less harmful to remove pollutants, and it has been adopted widely. After the success of the way by LASER, there are several trials to adopt the way to our cultural properties which have similar materials. Those showed satisfactory results and studies for developing the securer and more dependable ways to apply. From now on the report will show the effective ways to apply the method using LASER on to the similar materials and different materials as well and discuss about the pros and cons about the method.