• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.539-542
• /
• 2007

The transient response of PEMFC (proton exchange membrane fuel cell) is important criteria in the application of PEM fuel cell to real automotive system. In this work, using a transparent unit PEM fuel cell, the transient response and cathode flooding during load change are investigated. The cell voltage is acquired according to the current density change($0.3Acm^2$ to $0.6A/cm^2$) under various stoichiometry conditions and different flooding intensities, Also the cathode gas channel images are obtained by CCD imaging system simultaneously. The different level of undershoots appeared at the moment of load changes under different cathode stoichiometries and flooding intensities. The correlation of the dynamic behavior with stoichiometry and cathode flooding is induced from the results of these experiments.

• Journal of Korea Technology Innovation Society
• /
• v.5 no.2
• /
• pp.228-244
• /
• 2002

The survey of research and development (R&D) in science and technology (S&T) covers the current status of R&D activities in S&T in Korea, and provides a basis for decision making regarding S&T policy. Continuous improvement of the survey is widely needed to present reliable national basic statistics. Therefore, the purpose of the study is two-fold: to introduce sampling survey method in industrial sector and to make statistical technique to deal with non-response data from industrial sector. To these ends, first, case studies of the United States and Japan are illustrated. A new sampling design for the R&D survey is proposed and implementing stratified random sampling scheme is suggested. Moreover, statistical analysis of the non-response data is dealt with. Based on several screening criteria, we develop a new imputation method suitable for the R&D survey and also provide more detailed implementation plan. Various solutions to a problem arising from non-response item are also presented. Finally, some implications of the results are discussed.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.24 no.3
• /
• pp.43-51
• /
• 1987

In this paper, dynamic elastic, plastic response of beam-columns is analysed using discrete models. composed of rigid bars and springs. The equation of motion is formulated including the shear deformation effect, and the stress change of yielding points is calculated with various yielding criteria. The effect of initial axial force is considered by two ways: (1) including the effect in interaction curve only. (2) including the effect directly in the equation of motion in terms of initial stiffness method is also used in nonlinear interaction procedure. It is found that this model is very effective in analysing not only the plastic response but the elastic response, and present method is more efficient than Finite Element Method from the viewpoint of calculation time and accuracy.

• Journal of Electrical Engineering and Technology
• /
• v.3 no.2
• /
• pp.207-212
• /
• 2008

This paper presents a robust and computationally efficient optimal design algorithm for electromagnetic devices by combining an adaptive response surface approximation of the objective function and($1+{\lambda}$) evolution strategy. In the adaptive response surface approximation, the design space is successively reduced with the iteration, and Pareto-optimal sampling points are generated by using Latin hypercube design with the Max Distance and Min Distance criteria. The proposed algorithm is applied to an analytic example and TEAM problem 22, and its robustness and computational efficiency are investigated.

• Journal of the Korean Society of Costume
• /
• v.54 no.8
• /
• pp.59-74
• /
• 2004

The Purposes of this study are to investigate consumers' causes of clothing preference and dispreference separately, and to get 'real' descriptions about that causes using an open-ended response questionnaire. The sample was composed of 81 undergraduate students. Subjects were asked to select their preferred clothing and disprefered clothing respectively among wardrobes they have and to describe the causes of that preference/dispreference. The data was collected through an open-ended response questionnaire and analyzed using content analysis. The system for content analysis was divided into the view Point of image, clothing itself, wearer's physical characteristics, wearing situation, others' response, wearer's values, wearer's consciousness, and purchase process. Image was the primary cause that raised clothing preference, and clothing itself, wearer's physical characteristic, wearing situation, others' response, wearer's consciousness, wearer's values, and purchase process followed. In audition. wearer's physical characteristic was the primary cause that raised clothing dispreference. and image, clothing itself. wearer's consciousness, wearer's values. wearing situation, purchase process, and others' response followed. Finally, the framework for the causes of clothing preference/dispreference was developed.

• Structural Engineering and Mechanics
• /
• v.23 no.5
• /
• pp.505-523
• /
• 2006

An unrestrained plane rigid body resting on a horizontal surface which shakes horizontally and vertically may assume one of the five modes of response: rest, slide, slide-rock, rock, and free flight. The first four are nontrivial modes of motion. It is important to study which one of these responses is started from rest as in most studies it is often assumed that the initial mode is the particular mode of response. Criteria governing the initiation of modes are first briefly discussed. It is shown that the commencement of response modes depends on the aspect ratio of the body, coefficients of static and kinetic friction at the body-base interface, and the magnitude of maximum base accelerations. Considering the last two factors as random variables, the initiation of response modes is next studied from a probabilistic point of view. Type 1 extreme value and lognormal distributions are employed for maximum base excitations and coefficient of friction respectively. Analytical expressions for computing the probability values of each mode of response are derived. The effects of slenderness ratio, vertical acceleration, and statistical distributions of maximum acceleration and coefficient of friction are shown through numerical results and plots.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.1
• /
• pp.25-31
• /
• 2021

The semiconductor and display equipment demands an ultra-fine precision of several nm to several ㎛, and the scale is getting smaller due to the explosive development. The manufacturing process equipment for such products with ultra-fine precision is very sensitive to ultra-small vibrations flowing from the floor, resulting in problems of production defects and yield degradation. The vibration criteria are a standard that regulates the vibration environment of the floor where such precision process equipment will be installed. The BBN vibration criteria defined the allowable vibration velocity level in the frequency domain with a flat and inclined line and presented a rating according to it. However, the actual vibration criteria have appeared with various magnitudes in the frequency domain according to the dynamic characteristics of individual equipment. In this study, the relationship between the relative motion of two major points in the equipment and the vibration magnitude of the floor is presented using the frequency response function of a simple 3-DOF model. It is describing the magnitudes according to the frequency of the floor vibration that guarantees the allowable relative motion and this can be used as the vibration criteria. In order to obtain the vibration criteria experimentally a method of extracting through a modal test was introduced and verified analytically. It provides vulnerable frequency and magnitude to floor vibration in consideration of the dynamic characteristics of individual equipment. And it is possible to know necessary to improve the dynamic characteristics of the equipment, and it can be used to check the vibration compatibility of the place where the equipment will be installed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.10a
• /
• pp.772-778
• /
• 2009

By rising the interests of the railroad, It has been required the research about railroad structure. And since 2000, the study about railway bridges caused by steel box railway bridges has been only 0.2%. So I was hard to find out about steel box railway bridges. In this study, I evaluate and analyze 4 types(KTX, Saemaeul, Mugunghwa, Freight) of dynamic caused by train loading, natural frequency and damping ratio, verticality deflection and verticality acceleration, end slope deflection, impact factor for dynamic characteristics analysis. natural frequency was measured 2.45Hz~3.34Hz and damping ratio revealed for 1.26~2.84%. Maximum verticality deflection(4.86mm) was sufficiently satisfied the design criteria(30.1mm), but in the case of verticality acceleration's respond, design criteria BRDM(Bridge Design Manual) & CTRL presentation derive rail limit value 0.35g be more than value 6 time recorded, maximum was measured 0.49g in 3 kinds of train(KTX, Saemaeul, Mugunghwa), except for Freight. Survey impact factor of Experiment bridge was 0.20 which is measured when the KTX(15:04) was driving. impact factor is enough contended with design criteria 0.29 which is presented in domestic railway design criteria and thoroughly guarantee the dynamic stability.

• The Korean Journal of Applied Statistics
• /
• v.28 no.3
• /
• pp.561-571
• /
• 2015

When we consider an optimal design to predict the response corresponding to the point outside the design region, we are extremely careful about choosing the design criteria for selecting the support points. The assumed model and its accompanying error structure should be assumed to extend beyond the design region for the selected design criteria to be valid. Thus, we modify the existing design criteria such as extrapolation-optimality to be suited to those situations. We propose some maximin approaches in this paper. Simple and quadratic regression models are tested to find the basic characteristics of such maximin approaches. Some main findings are discussed in the conclusion.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.68-74
• /
• 2017

To predict the damage of Reinforced Concrete (RC) structures from mass explosion, Pressure-Impulse (P-I) curves representing the relationship between peak pressure and impulse based on damage criteria are essential. There are P-I curves developed by the U.S. DoD without detailed explanation regarding validation. In this study, full scale explosion tests were conducted measuring response of RC slab to modify and validate pre-existing P-I curves. Four same RC slabs were prepared, and placed at different distances, which are fixed to steel frame with concrete base. Scaled distances were selected to show different failure types using P-I curve based on Single Degree Of Freedom (SDOF) model. It was found that SDOF model can be used to evaluate and identify one-way RC slab damage with difference damage criteria.