• 한국운동역학회지
• /
• 제24권4호
• /
• pp.367-373
• /
• 2014

Most athletes execute rhythmic hop as a preparatory motion in Taekwondo sparring. The purpose of this study was to investigate the effect of rhythmic hop on the response times and kicking velocities of Taekwondo kicks. Twelve male elite Taekwondo athletes performed a roundhouse kick and a back kick as fast as possible immediately after seeing an external stimulus in rhythmic hop and in no hop, respectively. The three-dimensional marker data of the whole body were measured at sampling rate of 200 Hz. Paired t-tests were used to compare dependent measures between hop and no hop conditions. Results indicated that the rhythmic hop did not affect response time statistically but improved the kicking velocity significantly than no hop did. Different instants of detecting an external stimulus in rhythmic hop for the back kick showed significantly different response times. Conclusively, rhythmic hop is recommendable for the purpose of kicking velocity, but not for the purpose of response time. Athletes should be careful in executing rhythmic hop as their preparatory motions for the back kick, since the response time could be shortened or lengthened according to the instant of detecting an external stimulus.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 봄 학술발표회 논문집
• /
• pp.5-10
• /
• 1989

In this study, the basic concept of design response spectrum is briefly revi-ewed. To generate the artificial earthquake acceleration, the method of superpo-sition of cosine waves is used. Theoretical developments using F.F.T. and spect-ral density function are compared. The amplitude was derived by use of the peak factor and the phase angle is d-erived by use of Monte Carlo simulation. To smoothen the match, the calculated pseudo velocity respon-se spectrum is compared with input pseudo velocity response spectrum at a set of control frequencies. With the modified spectral density function, a new acceleration and pseudo velocity response spectrum are generat-ed.

• Structural Engineering and Mechanics
• /
• 제54권4호
• /
• pp.771-792
• /
• 2015

In the paper we study dynamic response of a finite, simply supported Timoshenko beam subject to a moving continuously distributed forces. Three problems have been considered. The dynamic response of the Timoshenko beam under a uniform distributed load moving with a constant velocity v has been considered as the first problem. Obtained solutions allow to find the response of the beam under the interval of the finite length a uniformly distributed moving load. Part of the solutions are presented in a closed form instead of an infinite series. As the second problem the steady-state vibrations of the beam under uniformly distributed mass $m_1$ moving with the constant velocity has been considered. The vibrations of the beam caused by the interval of the finite length randomly distributed load moving with constant velocity is considered as the last problem. It is assumed that load process is space-time stationary stochastic process.

• Advances in concrete construction
• /
• 제9권1호
• /
• pp.103-113
• /
• 2020

This paper deal with the critical fluid velocity response of nanocomposite pipe conveying fluid based on numerical method. The pressure of fluid is obtained based on perturbation method. The motion equations are derived based on classical shell theory, energy method and Hamilton's principle. The shell is reinforced by nanoparticles and the distribution of them are functionally graded (FG). The mixture rule is applied for obtaining the equivalent material properties of the structure. Differential quadrature method (DQM) is utilized for solution of the motion equations in order to obtain the critical fluid velocity. The effects of different parameters such asCNT nanoparticles volume percent, boundary conditions, thickness to radius ratios, length to radius ratios and internal fluid are presented on the critical fluid velocity response structure. The results show that with increasing the CNT nanoparticles, the critical fluid velocity is increased. In addition, FGX distribution of nanoparticles is the best choice for reinforcement.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.94.2-94
• /
• 2002

$\textbullet$ The method to have real-time response at the motion control. $\textbullet$ The trajectory generation method guarantees the continuous acceleration in changing the velocity during the actuator is moving. $\textbullet$ We propose the velocity profile generation algorithm in order to change object position or object velocity with continuous acceleration using blending method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.465-470
• /
• 2003

In this study, the state-space Newmark method based on average velocity is presented to analyse the transient dynamic response for general dynamic system. The conventional Newmark method based on average acceleration cannot he directly to the first-order state-space differential equations introducing the state-space vector. To overcome this problem, the time-step integration algorithm, based on average velocity concept, suitable for the first-order state-space differential equations is proposed In results, the proposed method has %he numerical stability and order of accuracy, which is proved analytically, equal to those of the conventional Newmark method based on average acceleration. Also, the formulation for numerical solution is very simple and the calculation time Is nearly equal to that of the conventional Newmark method based on average acceleration in spite of an increase of two times over matrix size. This method will be look forward to applying the general dynamic system to calculate the transient dynamic response.

• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.40-46
• /
• 2008

This paper presents the optimal motion control for 3-axis SCARA robot by using $LabVIEW^{(R)}$. Specifically, for optimal motion control of 3-axis SCARA robot, we study velocity profile based on finite jerk(the first derivative of acceleration) and optimal gain tunig based on frequency response method by using $LabVIEW^{(R)}$. The velocity optimization with finite jerk aims at generating the smooth velocity profile of robot. Velocity profile based on finite jerk is acquired and applied to 3-axis SCARA robot by using $LabVIEW^{(R)}$. DSA(Dynamic Signal Analyzer) for frequency response method is programed by using $LabVIEW^{(R)}$. We obtain the bode plot of transfer function about 3-axis SCARA robot by using DSA, and perform the gain tuning considering dynamic characteristic based on the bode plot. These experiments have shown that the proposed motion control can reduce vibration displacement and response error rate each 33.7% and 51.7% of 3-axis SCARA robot.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.247-250
• /
• 2002

SAW filters were fabricated on $LiNbO_3$ substrates to evaluate frequency response and properties of photolithography. In the both of etch and lift-off methods, lift off method was superior to etch method in fabrication process. Frequency response property was measured by network analyzer. From measurement of acoustic property, SAW propagation velocity was 3574.9m/sec for $LiNbO_3$ SAW filter.

• Structural Engineering and Mechanics
• /
• 제68권3호
• /
• pp.325-334
• /
• 2018

The Nonlinear dynamic response of a sandwich plate subjected to the low velocity impact is theoretically and experimentally investigated. The Hertz law between the impactor and the plate is taken into account. Using the Extended High Order Sandwich Panel Theory (EHSAPT) and the Ritz energy method, the governing equations are derived. The skins follow the Third order shear deformation theory (TSDT) that has hitherto not reported in conventional EHSAPT. Besides, the three dimensional elasticity is used for the core. The nonlinear Von Karman relations for strains of skins and the core are adopted. Time domain solution of such equations is extracted by means of the well-known fourth-order Runge-Kutta method. The effects of core-to-skin thickness ratio, initial velocity of the impactor, the impactor mass and position of the impactor are studied in detail. It is found that these parameters play significant role in the impact force and dynamic response of the sandwich plate. Finally, some low velocity impact tests have been carried out by Drop Hammer Testing Machine. The results are compared with experimental data acquired by impact testing on sandwich plates as well as the results of finite element simulation.

• 한국해양공학회지
• /
• 제7권2호
• /
• pp.44-56
• /
• 1993

본 연구는 강구에 의한 충격을 받는 유리/에폭시 적층복합판의 충격 응답 및 파동 전파 특성을 연구하는데 그 목적이 있다. 이를 위하여 고차전 다변형이론에 기초한 동적 유한요소해석을 행하였으며, 저속 및 고속 충격 실험을 행하였다. 동적 유한요소해석으로 부터 접촉력의 변화와 강구의 반발 속도 그리고 충격에 의한 변형률 응답을 구하였다. 변형률 응답은 충격 실험의 결과와 비교 하였다. 또한 고속 충격 실험의 결과로 부터 파동전파 속도를 계산하여 파동 전파 이론에 의한 결과와 비교 검토하였다. 그 결과, 충격 실험에서 구한 변형률 응답은 동적 유한요소해석에 의한 결과의 경향과 잘 일치하였으며, 충격 속도의 증가에 따른 최대접촉력의 증가율은 판의 크기가 클수록 증가하였다. 그리고 파동 전파 속도는 구 결과가 잘 일치하였으며, 접촉시간에 의한 영향으로 강구의 크기가 클 수록 빠르게 나타났다.